Initial revision.

README

@@ -0,0 +1,27 @@
+= Introduction =
+
+xmonad-config is the Xmonad and xmobar configuration used by Vic Fryzel.
+http://github.com/vicfryzel/xmonad-config
+
+
+= Requirements =
+
+== Haskell Packages ==
+ * xmonad 0.9.1
+ * xmonad-contrib 0.9.1
+ * xmobar 0.11.1
+
+
+= Installation =
+
+$ cd
+$ mv .xmonad .xmonad.orig
+$ git clone git@github.com:vicfryzel/xmonad-config.git .xmonad
+
+
+= Notes =
+
+The key bindings are listed in xmonad.hs.
+
+The colors set in the xmobar config are meant to coincide with the IR_Black
+terminal and vim themes found at http://blog.infinitered.com/entries/show/6.

xmobar

@@ -0,0 +1,23 @@
+-- xmobar config used by Vic Fryzel
+-- http://github.com/vicfryzel/xmonad-config
+-- This is setup for dual 1680x1050 monitors, with the right monitor as primary
+
+Config { font = "xft:Fixed-8"
+      , bgColor = "#000000"
+      , fgColor = "#ffffff"
+      , position = Static { xpos = 1680, ypos = 0, width = 1560, height = 16 }
+      , lowerOnStart = True
+      , commands = [ Run Weather "KNYC" ["-t","<tempF>F <skyCondition>","-L","64","-H","77","--normal","#CEFFAC","--high","#FFB6B0","--low","#96CBFE"] 36000
+                   , Run Cpu ["-L","3","-H","50","--normal","#CEFFAC","--high","#FFB6B0"] 10
+                   , Run MultiCpu ["-t","Cpu: <total0><total1><total2><total3>","-L","3","-H","50","--normal","#CEFFAC","--high","#FFB6B0","-w","5"] 10
+                   , Run Memory ["-t","Mem: <usedratio>%"] 10
+                   , Run Swap [] 10
+            		   , Run Network "eth0" ["-t","Net: <rx>, <tx>","-H","200","-L","10","-h","#FFB6B0","-l","#CEFFAC","-n","#FFFFCC"] 5
+                   , Run Date "%a %b %_d %l:%M" "date" 10
+                   , Run StdinReader
+                   ]
+      , sepChar = "%"
+      , alignSep = "}{"
+      , template = "%StdinReader% }{ %multicpu%   %memory%   %swap%   %eth0%   <fc=#FFFFCC>%date%</fc>   %KNYC%"
+      }
+

xmonad.hs

@@ -0,0 +1,317 @@
+--
+-- xmonad config used by Vic Fryzel
+-- http://github.com/vicfryzel/xmonad-config
+--
+
+import System.IO
+import System.Exit
+import XMonad
+import XMonad.Hooks.DynamicLog
+import XMonad.Hooks.ManageDocks
+import XMonad.Hooks.SetWMName
+import XMonad.Layout.NoBorders
+import XMonad.Layout.Spiral
+import XMonad.Layout.Tabbed
+import XMonad.Util.Run(spawnPipe)
+import XMonad.Util.EZConfig(additionalKeys)
+
+import qualified XMonad.StackSet as W
+import qualified Data.Map        as M
+
+-- The preferred terminal program, which is used in a binding below and by
+-- certain contrib modules.
+--
+myTerminal      = "gnome-terminal"
+
+-- Width of the window border in pixels.
+--
+myBorderWidth   = 1
+
+-- modMask lets you specify which modkey you want to use. The default
+-- is mod1Mask ("left alt").  You may also consider using mod3Mask
+-- ("right alt"), which does not conflict with emacs keybindings. The
+-- "windows key" is usually mod4Mask.
+--
+myModMask       = mod1Mask
+
+-- The mask for the numlock key. Numlock status is "masked" from the
+-- current modifier status, so the keybindings will work with numlock on or
+-- off. You may need to change this on some systems.
+--
+-- You can find the numlock modifier by running "xmodmap" and looking for a
+-- modifier with Num_Lock bound to it:
+--
+-- > $ xmodmap | grep Num
+-- > mod2        Num_Lock (0x4d)
+--
+-- Set numlockMask = 0 if you don't have a numlock key, or want to treat
+-- numlock status separately.
+--
+myNumlockMask   = mod2Mask
+
+-- The default number of workspaces (virtual screens) and their names.
+-- By default we use numeric strings, but any string may be used as a
+-- workspace name. The number of workspaces is determined by the length
+-- of this list.
+--
+-- A tagging example:
+--
+-- > workspaces = ["web", "irc", "code" ] ++ map show [4..9]
+--
+myWorkspaces    = ["1:code","2:web","3:msg","4:vm","5:media","6","7","8","9"]
+
+-- Border colors for unfocused and focused windows, respectively.
+--
+myNormalBorderColor  = "#7c7c7c"
+myFocusedBorderColor = "#ffb6b0"
+
+------------------------------------------------------------------------
+-- Key bindings. Add, modify or remove key bindings here.
+--
+myKeys conf@(XConfig {XMonad.modMask = modMask}) = M.fromList $
+
+    -- launch a terminal
+    [ ((modMask .|. shiftMask, xK_Return), spawn $ XMonad.terminal conf)
+
+    -- launch gmrun
+    , ((modMask .|. controlMask, xK_l     ), spawn "xscreensaver-command -lock")
+
+    -- launch dmenu
+    , ((modMask,               xK_p     ), spawn "exe=`dmenu_path | ~/bin/dmenu` && eval \"exec $exe\"")
+
+    -- launch gmrun
+    , ((modMask .|. shiftMask, xK_p     ), spawn "gmrun")
+
+    -- close focused window 
+    , ((modMask .|. shiftMask, xK_c     ), kill)
+
+     -- Rotate through the available layout algorithms
+    , ((modMask,               xK_space ), sendMessage NextLayout)
+
+    --  Reset the layouts on the current workspace to default
+    , ((modMask .|. shiftMask, xK_space ), setLayout $ XMonad.layoutHook conf)
+
+    -- Resize viewed windows to the correct size
+    , ((modMask,               xK_n     ), refresh)
+
+    -- Move focus to the next window
+    , ((modMask,               xK_Tab   ), windows W.focusDown)
+
+    -- Move focus to the next window
+    , ((modMask,               xK_j     ), windows W.focusDown)
+
+    -- Move focus to the previous window
+    , ((modMask,               xK_k     ), windows W.focusUp  )
+
+    -- Move focus to the master window
+    , ((modMask,               xK_m     ), windows W.focusMaster  )
+
+    -- Swap the focused window and the master window
+    , ((modMask,               xK_Return), windows W.swapMaster)
+
+    -- Swap the focused window with the next window
+    , ((modMask .|. shiftMask, xK_j     ), windows W.swapDown  )
+
+    -- Swap the focused window with the previous window
+    , ((modMask .|. shiftMask, xK_k     ), windows W.swapUp    )
+
+    -- Shrink the master area
+    , ((modMask,               xK_h     ), sendMessage Shrink)
+
+    -- Expand the master area
+    , ((modMask,               xK_l     ), sendMessage Expand)
+
+    -- Push window back into tiling
+    , ((modMask,               xK_t     ), withFocused $ windows . W.sink)
+
+    -- Increment the number of windows in the master area
+    , ((modMask              , xK_comma ), sendMessage (IncMasterN 1))
+
+    -- Deincrement the number of windows in the master area
+    , ((modMask              , xK_period), sendMessage (IncMasterN (-1)))
+
+    -- toggle the status bar gap
+    -- TODO, update this binding with avoidStruts , ((modMask              , xK_b     ),
+
+    -- Quit xmonad
+    , ((modMask .|. shiftMask, xK_q     ), io (exitWith ExitSuccess))
+
+    -- Restart xmonad
+    , ((modMask              , xK_q     ), restart "xmonad" True)
+    ]
+    ++
+
+    --
+    -- mod-[1..9], Switch to workspace N
+    -- mod-shift-[1..9], Move client to workspace N
+    --
+    [((m .|. modMask, k), windows $ f i)
+        | (i, k) <- zip (XMonad.workspaces conf) [xK_1 .. xK_9]
+        , (f, m) <- [(W.greedyView, 0), (W.shift, shiftMask)]]
+    ++
+
+    --
+    -- mod-{w,e,r}, Switch to physical/Xinerama screens 1, 2, or 3
+    -- mod-shift-{w,e,r}, Move client to screen 1, 2, or 3
+    --
+    [((m .|. modMask, key), screenWorkspace sc >>= flip whenJust (windows . f))
+        | (key, sc) <- zip [xK_w, xK_e, xK_r] [0..]
+        , (f, m) <- [(W.view, 0), (W.shift, shiftMask)]]
+
+
+------------------------------------------------------------------------
+-- Mouse bindings: default actions bound to mouse events
+--
+myMouseBindings (XConfig {XMonad.modMask = modMask}) = M.fromList $
+
+    -- mod-button1, Set the window to floating mode and move by dragging
+    [ ((modMask, button1), (\w -> focus w >> mouseMoveWindow w))
+
+    -- mod-button2, Raise the window to the top of the stack
+    , ((modMask, button2), (\w -> focus w >> windows W.swapMaster))
+
+    -- mod-button3, Set the window to floating mode and resize by dragging
+    , ((modMask, button3), (\w -> focus w >> mouseResizeWindow w))
+
+    -- you may also bind events to the mouse scroll wheel (button4 and button5)
+    ]
+
+------------------------------------------------------------------------
+-- Layouts:
+
+-- You can specify and transform your layouts by modifying these values.
+-- If you change layout bindings be sure to use 'mod-shift-space' after
+-- restarting (with 'mod-q') to reset your layout state to the new
+-- defaults, as xmonad preserves your old layout settings by default.
+--
+-- The available layouts.  Note that each layout is separated by |||,
+-- which denotes layout choice.
+--
+myTabConfig = defaultTheme {   activeBorderColor = "#7C7C7C"
+                             , activeTextColor = "#CEFFAC"
+                             , activeColor = "#000000"
+                             , inactiveBorderColor = "#7C7C7C"
+                             , inactiveTextColor = "#EEEEEE"
+                             , inactiveColor = "#000000" }
+myLayout = avoidStruts (tiled ||| Mirror tiled ||| tabbed shrinkText myTabConfig ||| Full ||| spiral (6/7))
+  where
+     -- default tiling algorithm partitions the screen into two panes
+     tiled   = Tall nmaster delta ratio
+
+     -- The default number of windows in the master pane
+     nmaster = 1
+
+     -- Default proportion of screen occupied by master pane
+     ratio   = 1/2
+
+     -- Percent of screen to increment by when resizing panes
+     delta   = 3/100
+
+------------------------------------------------------------------------
+-- Window rules:
+
+-- Execute arbitrary actions and WindowSet manipulations when managing
+-- a new window. You can use this to, for example, always float a
+-- particular program, or have a client always appear on a particular
+-- workspace.
+--
+-- To find the property name associated with a program, use
+-- > xprop | grep WM_CLASS
+-- and click on the client you're interested in.
+--
+-- To match on the WM_NAME, you can use 'title' in the same way that
+-- 'className' and 'resource' are used below.
+--
+myManageHook = composeAll
+    [ className =? "MPlayer"        --> doFloat
+    , className =? "Smplayer"       --> doFloat
+    , className =? "Psx.real"       --> doFloat
+    , className =? "Gimp"           --> doFloat
+    , className =? "Galculator"     --> doFloat
+    , resource  =? "Komodo_find2"   --> doFloat
+    , resource  =? "compose"        --> doFloat
+    , className =? "Terminal"       --> doShift "1:code"
+    , className =? "Gedit"          --> doShift "1:code"
+    , className =? "Emacs"          --> doShift "1:code"
+    , className =? "Komodo Edit"    --> doShift "1:code"
+    , className =? "Emacs"          --> doShift "1:code"
+    , className =? "Google-chrome"  --> doShift "2:web"
+    , className =? "Thunderbird-bin" --> doShift "3:msg"
+    , className =? "Pidgin"         --> doShift "3:msg"
+    , className =? "VirtualBox"     --> doShift "4:vm"
+    , className =? "banshee-1"      --> doShift "5:media"
+    , className =? "Ktorrent"       --> doShift "5:media"
+    , className =? "Xchat"          --> doShift "5:media"
+    , resource  =? "desktop_window" --> doIgnore
+    , resource  =? "kdesktop"       --> doIgnore ]
+
+-- Whether focus follows the mouse pointer.
+myFocusFollowsMouse :: Bool
+myFocusFollowsMouse = True
+
+
+------------------------------------------------------------------------
+-- Status bars and logging
+
+-- Perform an arbitrary action on each internal state change or X event.
+-- See the 'DynamicLog' extension for examples.
+--
+-- To emulate dwm's status bar
+--
+-- > logHook = dynamicLogDzen
+--
+
+------------------------------------------------------------------------
+-- Startup hook
+
+-- Perform an arbitrary action each time xmonad starts or is restarted
+-- with mod-q.  Used by, e.g., XMonad.Layout.PerWorkspace to initialize
+-- per-workspace layout choices.
+--
+-- By default, do nothing.
+myStartupHook = return ()
+
+------------------------------------------------------------------------
+-- Now run xmonad with all the defaults we set up.
+
+-- Run xmonad with the settings you specify. No need to modify this.
+--
+main = do
+	xmproc <- spawnPipe "/usr/bin/xmobar ~/.xmonad/xmobar"
+	xmonad $ defaults {
+		logHook            = dynamicLogWithPP $ xmobarPP {
+                                ppOutput = hPutStrLn xmproc
+                                , ppTitle = xmobarColor "#FFB6B0" "" . shorten 100
+                                , ppCurrent = xmobarColor "#CEFFAC" ""
+                                , ppSep = "   "
+                                }
+		, manageHook = manageDocks <+> myManageHook
+		, startupHook = setWMName "LG3D"
+	}
+
+-- A structure containing your configuration settings, overriding
+-- fields in the default config. Any you don't override, will 
+-- use the defaults defined in xmonad/XMonad/Config.hs
+-- 
+-- No need to modify this.
+--
+defaults = defaultConfig {
+      -- simple stuff
+        terminal           = myTerminal,
+        focusFollowsMouse  = myFocusFollowsMouse,
+        borderWidth        = myBorderWidth,
+        modMask            = myModMask,
+        numlockMask        = myNumlockMask,
+        workspaces         = myWorkspaces,
+        normalBorderColor  = myNormalBorderColor,
+        focusedBorderColor = myFocusedBorderColor,
+
+      -- key bindings
+        keys               = myKeys,
+        mouseBindings      = myMouseBindings,
+
+      -- hooks, layouts
+        layoutHook         = smartBorders $ myLayout,
+        manageHook         = myManageHook,
+        startupHook        = myStartupHook
+    }