Update Release update 7.0040.1000.txt

debian/Release.txt

@@ -14,22 +14,22 @@
 	#3878328	SN4700 : Switch rebooted with "Thermal Overload" because ASIC thermal is not available 
 	#3885405	TC: [Thermal Algorithm] | Blacklist is malfunctions
 	#3883147	TC: [Thermal Algorithm] | Counts errors even it was paused by black list
-	#3879220	SN3420 :  Thermal control: increase PWM minimum speed (20%->25%) to work around fan state issue reported by smond
+	#3879220	SN3420 : Thermal control: increase PWM minimum speed (20%->25%) to work around fan state issue reported by smond
 	#3895891	SPC1: [systemctl is-system-running] | SPC1 stuck in starting state after config reload - System was not started – lmsensor dependency issue
-	#3900159	QM3400: Kernel 6.1] thermal/module#_temp_crit: Input/output error 
+	#3900159	QM3400: [Kernel 6.1] thermal/module#_temp_crit: Input/output error 
 	#3900138	QM3400: [Kernel 6.1] Can't get value of subfeature temp input for front panel 
 	#3882472	QM3000 | QM3400:  Mismatch system names in TC config (qm3400 instead q3200)
 	#3948113	Switch is freezing after generating hw-mgmt dump few times in row 
 	#3852236	ARM: Kernel oops symptoms after boot: Unable to handle kernel paging address xxx when BSP Drivers are used
 	NA		msn5400 | msn5600 | sn4280 :TC: fix asic sensor mask in sensor_parameters
-	NA		Fix vpd parser sanity check is done only for 'MLNX' fru types
+	NA		vpd parser: Sanity check is done only for 'MLNX' fru types
 	NA		Multi ASIC system: kernel config CONFIG_HOTPLUG_PCI_PCIE (kernel 6.1) is required to be disabled for the sw_reset on multi asic systems 
 	NA		TC: missing support of correct PWM calculation for systems with amb_{X} sensor count  != 2 
-	NA		MSN4700 | MQM9520:Some PSU1 labels are incorrectly marked as PSU2.
-	NA		QM3000 | QM3400: voltmon1 and voltmon4 symlinks pointing to curr2 sensors Instead of curr3 sensors.
-	NA		QM3000 ASIC PCIE mapping was wrong
-	NA		Missing support for Kconfig per Kernel major version
-	NA		vpd-parser :In case onie "Base MAC Address" filed ends with zero byte - vpd-parser cut last byte in output.
+	NA		MSN4700 | MQM9520 :Some PSU1 labels are incorrectly marked as PSU2.
+	NA		QM3000 | QM3400 :voltmon1 and voltmon4 symlinks pointing to curr2 sensors Instead of curr3 sensors.
+	NA		QM3000 : ASIC PCIE mapping was wrong
+	NA		Deployment tool : Missing support for Kconfig per Kernel major version
+	NA		vpd-parser: In case onie "Base MAC Address" filed ends with zero byte - vpd-parser cut last byte in output.
 
     o  For detailed patch list: Please view:  https://github.com/Mellanox/hw-mgmt/blob/V.7.0040.1000_BR/recipes-kernel/linux/Patch_Status_Table.txt