Skip to content

V.7.0030.2300
Compare
Choose a tag to compare
@yyehudai yyehudai released this 28 May 11:55
V.7.0030.2300
f5f4975
This commit was created on github.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Learn about vigilant mode.

================================================================================

  • V.7.0030.2300
  • Tue , 28 May 2023

  • Bug fixes
    Issue Title
    #3706151 [MSN4600-VS2RC] : Fans running at high speed when PN of switch is SSG7B27990
    #3649551 [SPC2|SPC3|QM1|QM2|QM3] TC - dynamic minimum table RPM values for "sensor_read_error" were too low causing system hitting up
    #3651819 [SN2410] in systems with customer-adjusted PN, the fan direction is not recognized , it appears wrong and causing faulty TC behaviour
    #3723906 systems occasionally report errors for FAN2 & FAN3 although only PSU FAN1 exists
    #3733632 [MSN2410|MSN2100|MSN2010] sensors.conf "Chassis Fan Drawer x fan y" labels were mistakly defined as "fan z"
    #3726901 [MSN27002] voltmon6 mistakenly appearing in sensor_list at tc_config.json file causing ERROR of reading file voltmon6_temp
    #3748535 [SP1|SPC2] chipup timeout is too short over legacy system causing sometimes failure
    NA When I2C device’s 1st probe fails there is no retry performed.
    NA Hw mgmt started handling udev events before basic hw mgmt initialization is done
    NA udev events were handled randomly by hw mgmt since udev settle command was missed in hw mgmt init
    NA [MSN5400|MSN5600|QM3400] TC – systems with a single Fan direction always considered in TC to be P2C
    NA [MSN5600|MSN5400] sensors: mistakes in labels of sensor conf.
    NA [MSN5600|MSN5400] sensors: missed sensors config rule for 2nd PSU
    NA [MSN3420] symlink mistakenly pointing to MSN3700 sensors config file

    o For detailed patch list: Please view: https://github.com/Mellanox/hw-mgmt/blob/V.7.0030.2300_BR/recipes-kernel/linux/Patch_Status_Table.txt

  • Known issues and limitations:

    o Systems like sn2700 which contain delta 460 PSU may have "Error getting sensor data: dps460/#25: Can't read"
    which is a temporary inaccessibility of certain alarm attributes read from the PSU
    o Patch 0181-Revert-Fix-out-of-bounds-memory-accesses-in-thermal.patch should be applied
    for kernel >= 5.10.74 only, to avoid thermal control interface issues
    o This version disables system reset in thermal algorithm
    o Kernel patch 4.9 #60 is available upstream from kernel 4.9.207 and
    Kernel patch 4.19 #28 is available upstream from kernel 4.19.89.
    - No need to apply these patches when working with these kernel versions
    or above
    o ethtool for QSFP-DD is working only in raw mode.
    o SN4700 PSU (Murata) sensors PSU2 and PSU3 might be not available after insertion/removal.
    o PSUs inventory read via PMBus require the following packages:
    - i2c-tools_4.1-1_amd64.deb
    - libi2c0_4.1-1_amd64.deb
    o I2C Asic driver take up to 5 second to complete initialization. When
    sending ADD even need to make sure to wait at list 5 second before
    reset of ASIC.
    o Systems SN2010, SN2100, SN2410, SN2700 and SN2740 (and their
    "-B" variants) require the following flag in kernel cmdline:
    "acpi_enforce_resources=lax acpi=noirq".
    o Few bug fixes introduced in upstream kernel 4.19, whoever use older
    v4.19 kernel then v4.19.58, should cherry pick the following commits:
    - Fix wrong order in probing routine initialization:
    d2d8f64012543898a0158b1fc5c07af3d41c89d8 (available in v4.19.49)
    - Fix parent device in i2c-mux-reg device registration
    c241f3fbfa1af86f572a92f2e4d708358e163806 (available in v4.19.58)
    o Kernel patch 4.9 #37 is available upstream from kernel 4.9.197 and
    Kernel patch 4.19 #9 is available upstream from kernel 4.19.79.
    - No need to apply these patches when working with these kernel versions
    or above
    o This version requires FW version 29.2000.1886 or higher for spectrum-2
    and 13.2000.1886 or higher for spectrum-1.

Assets 2