This readme branch is only for documentations and related tools. Please check other branches to view Triggernometry codes.

浏览中文版 View in Chinese

Check the main repo for Triggernometry documentations

This document is a summary for my edited parts since Triggernometry v1.1.7.3.

What's New

2024/5/27

Expressions

• String functions

  • tofullwidth / tohalfwidth

    ${func:tofullwidth:H1} = Ｈ１ ${func:tohalfwidth:Ｈ１} = H1

  • toxivchar(combineDigits=false)

    Convert the alphanumeric characters to the corresponding XIV-defined black box characters.
    If combineDigits, numbers between 10 and 31 would be converted to a single black box character.

  • ord(separator=",")

    Convert a string to a sequence of charcodes.
    ${func:ord:Test 1} = 84,101,115,116,32,49
${func:ord(-):Test 1} = 84-101-115-116-32-49

  • chr(joiner=",")

    The reverse of ord.
    ${func:chr:84,101,115,116,32,49} = Test 1

• Normal expressions

  • _triggerpath The full path of the fired trigger.

• Math functions

  • L1 and L∞ distance functions

    Definition of Ln-distance:

    • distance = (|x - x0| ^ n + |y - y0| ^ n + ...) ^ (1 / n)

    L2-distance: The normal distance (Euclidean distance)
    L1-distance: Manhattan distance
    L∞-distance: Chebyshev distance

    The expressions could be written as:

    l1d(...) / manhattandistance(...) l∞d(...) / chebyshevdistance(...)

    parameters: same as distance()

    • e.g. l1d(x0, y0, x1, y1) l1d(x0, y0, z0, x1, y1, z1)

    If you need to check if 2 locations are close to each other very frequently, l1d is better than distance (less calculation).

Actions

• New action type: ACT Interaction

  Contains:

  • Start/End ACT Encounter (The original End Encounter is moved here and auto-converted)

  • Enable/disable "Use Deucalion" (injection)

  • Enable/disable "Log All Network Data"

  This feature could be very useful when SE suddenly uses some packets as the only way to figure out a mechanism, while that packet has not been parsed as log lines.

  You can control this option during certain time and use 252 = 0xFC network packet log lines to fire your trigger.

UI / Improve User Experience

• Allow to sort a folder in descending order

  Related discussion: https://discord.com/channels/374517624228544512/1237066801876041783

• Allow firing triggers outside developer mode

  Some triggers need the users to manually fire them for self-testing.

  This is better not considered as "developer" level of usage.

  There are many people asking about "why I cannot fire the trigger" in Discord, which also shows this point.

• Display error log count on the main UI

  Change the "Error has been encountered" message on the UI to display the specific number of errors encountered since the last opening of the error page.

  Also fix an issue where the error info would never display after being opened once despite subsequent errors.

  Additionally, refactored the logging system from a single Queue to a dictionary keyed by DebugLevelEnum. This allows a cap of 30000 logs per type instead of a shared cap of 100000, preventing general logs like Info and Verbose from overshadowing older Error/Warning logs.

• Enhanced double/triple-clicking selection in expression textboxes

  • Double-click:

    • Clicking on all types of brackets / $ / ¤:

      Select the full expression with enclosed brackets, which could be very useful when writing long nested expressions and you cannot find where the paired bracket is;

    • Clicking on spaces:

      Select the adjacent spaces in the same line;

    • Clicking on other characters:

      Select the current "word" (the splitting is better than original).

  • Triple-click:

    • Single-line: Select all text

    • Multi-line: Select current line

• Show more information of named callbacks in the state form

  • Registrant

  • Registration time

  • Last Invoked

Codes / Scripts

• Register Named Callbacks

  The registrant argument has been added:

  RegisterNamedCallback(string name, CustomCallbackDelegate callback, object o, string registrant) 

  The original function could still be used, and the registrant name would be detected automatically.

• Added a ReadonlyRichTextbox class to display text with customized format

  public class Triggernometry.CustomControls.ReadonlyRichTextbox : RichTextbox

  This rich textbox has a "transparent" background, and do not allow any kind of mouse interaction (just like a label).

• Provide more information during import

  • When the import fails, show more detailed reason

  • Show the plugin version of the imported xml

Bug Fixes

Check the link for details.

Notice: Changed Behaviour

• Line breaks

  ⏎ is considered the same as a linebreak (considered as whitespace characters). So it should be trimmed when splitting arguments, unless it is surrounded by quotation marks.

  • e.g. listvar.join("⏎") should be used instead of listvar.join(⏎).

  Also, line breaks could also be used in actions and considered as a single character:

  • e.g. using the expression below to build a list 1, 2, 3
    (the first char is a linebreak, which is used as the separator of the following text when building a list in the action):

    
    1
    2
    3
    

    This allows multiline input and makes it easier to read when using a large amount of data to build a variable.

2024/4/7

MessageBox

• More intelligent autofill:
  • If a string with one or no ${...} expressions was input in a textbox for variable names, it would be saved into a corresponding dynamic variable list;
  • If any input string contains a single-layer variable expressions like ${var:name}, the name would be save into the corresponding dynamic variable list;
  • If the user is typing after expressions like ${v:..., or typing in an expreesion textbox for variable names, it would also check all the names in the dynamic list.
  • This feature is compatitable with all kinds of variables (session/persistent), text/image auras, and named callbacks.
• Changed behaviour for Enter key in the ActionForm:
  • When pressing Enter in a single-line mode expression textbox, it would change to multi-line mode;
  • When pressing in multi-line mode, it would add a linebreak directly, and the next line would be added the same indent with the previous line.

Text Aura

• Color expressions
  • Added 3 expression textboxes for the text aura's forecolor, backcolor and outlinecolor.
  • Color expressions are the same as in the action descriptions, and would show the corresponding parsed color as the background color of the textbox:
    • aaccff / #aaccff
    • acf / #acf
    • 192, 0, 18
  • Those colors accept expressions, so it would be possible to dynamically change the colors based on some real values in a same action, without using several different actions with only the color different. (but for now, the action still needs to be executed to refresh the color) e.g. Changed the text color based on the 2 dragons' HP in DSR P6.
  • The color selector is still kept, for providing users a direct way to select colors.

RealPlugin / Interpreter

• Moved the RealPlugin.WindowsUtils class to Triggernometry.Utilities namespace, and added the corresponding scripting API safety option
• Added a ffxiv process handle (with all access):

    public IntPtr Triggernometry.Realplugin.plug.XivHandle

  Note: It is still safe because all APIs were still restricted. It could also be used in the future to read some entity properties which are not available in ACT / update too slowly in ACT (like coordination).
• Added 2 Json methods since the current scripting environment cannot access System.Text.Json directly:

    public static string Triggernometry.Interpreter.StaticHelpers.Serialize(object o, bool indent = true);
    public static T Triggernometry.Interpreter.StaticHelpers.Deserialize<T>(string s);

2024/3/27

MathParser

• Added an operator °, for example, 180° = 3.14159...
• Added a function isanglebetween(θ, θ1, θ2) to determine if a given angle θ is within the range from θ1 to θ2 (in the direction of increasing angle, i.e. counter-clockwise in FFXIV coordinate system).
  • The input angles do not need to be normalized to [-pi, pi]. The output is 0 or 1. isanglebetween(pi/4, 0, pi/2) = 1 isanglebetween(pi, pi/2, -pi/2) = 1 isanglebetween(0, pi/2, -pi/2) = 0
  • Example: Determine if the character's heading is safe in a back-facing mechanism.

Actions

• In the LogMessage action, a new option "Add log to ACT combat record" has been added to facilitate browsing both regular and custom logs together in the ACT combat record.
  • e.g., A 1B (HeadMarker) log with offset removed can be added to the combat record with a custom format, as if a log without offset was generated at the same time.

Entity

• New entity attributes added: subrole and roleid (corresponding to the text and numeric values defined below). Related discussion

  public enum RoleType
  { 
      None          = 0,
      Tank          = 8,
      Healer        = 16,
      DPS           = 24,
      Crafter       = 32,
      Gatherer      = 48,
      MainRole      = 56,

      PureHealer    = Healer | 1,
      FlexHealer    = Healer | 2,
      BarrierHealer = Healer | 3,
      StrengthMelee  = DPS | 1,
      DexterityMelee = DPS | 2,
      PhysicalRanged = DPS | 4,
      MagicalRanged  = DPS | 6,
  }

• Added a new query pattern for _entity: ${_entity[key=value].prop}
  • For example, ${_entity[bnpcid=12601].heading} can be used to query the entity of BNpcId 12601.
  • It returns the first entity found. If no entity is found, it returns the data of NullCombatant.
  • You can determine whether you are in the door boss based on the BNpcId of some characteristic entities.
  • If you need more complex query conditions, or to query multiple entities that meet the conditions, you can use the Table action to query all entities, or use scripts directly: List<VariableDictionary> Triggernometry.PluginBridges.BridgeFFXIV.GetAllEntities()

Interpreter

• Added a static utility class StaticHelpers to the Interpreter to facilitate the use of methods that are independent of the Context instance.
• All methods of TriggernometryHelpers are still available.
• Example:

using Triggernometry.Variables;
using static Triggernometry.Interpreter;

class ConfigForm
{
    //...

    public void LoadFromConfig()
    {
        VariableDictionary config = StaticHelpers.GetDictVariable(isPersistent, configName);
        // ...
    }
}

Others

• Modified action descriptions for actions requiring specific window titles and procid, following the newly added logic about procid.

• Fixed several null reference exceptions, such as ActionViewer.Actions = null causing sporadic errors when clicking in the ActionForm interface, and RealPlugin.plug.currentZone = null causing potential errors when editing group area restrictions with FFXIV not running.

• Renamed the testmode property to testByPlaceholder to avoid ambiguity, due to previously added properties for testing actions.

• Renamed several incorrectly named cbx... checkboxes to chk....

• Other minor modifications.

2023/11/29

• ActionViewer

  • Add Copy Conditions, Paste Conditions, Test Action in the right-click menu

• ActionForm / Action

  • Fix the null reference bug related with template trigger
  • The log entries for exceptions occurring in actions will now include the corresponding descriptions and trigger path
  • Added two actions:
    • VariableScalar - Increment (for convenience)
    • VariableTable - AppendH (append tables horizontally)
  • Update the links to the keypress documentations and switch to the corresponding links for the selected language option
  • Fix the issue that some table actions did not set their changer and time, such as Resize and Copy

• Context

  • ${estorage:xxx}: check if the scripting storage contains the key xxx
  • ${_storage[xxx]}: output the objects in the scripting storage
  • ${_configpath} ${_pluginpath}: the corresponding local folder paths
  • Added ${_config[UnsafeUsage]};
  • Changed the ${_config[API]} results to bitwise (0-7, Local << 2 | Remote << 1 | Admin)

• RealPlugin

  • Fix a bug where the version in cfg.Constants was not updated on the first launch after updating the plugin, but on the second launch
  • Expand the exceptions in named callbacks (delegates) to show their actual exception messages
  • Added a static RealPlugin RealPlugin.plug for convenient referencing (all the RealPlugin instances throughout the entire program are the same one).

• Others

  • Minor changes:
    • Change void Context.XxxxxError() to Exception Context.XxxxxError()
    • Change I18n.TrlXxxxx() to a single function I18n.Trl("xxxxx")
    • Change some internal to public for scripts
    • Translation fixes

2023/11/10

• ActionViewer

  • Fixed a bug where some buttons in ActionViewer sometimes are not enabled/disabled correctly;
  • Fixed a null reference error occasionally caused by double-clicking in dgvActions without actually selecting an action;
  • Fixed an error where disabled actions were not ignored when calculating total delay in the descriptions;
  • Fixed the issue where undo button would mess up OrderNumber. Also changed shallow copy to deep copy when saving the actions, allowing to undo modifications of individual actions;
  • Added quick settings in the action right-click menu for batch adjustment of async, delay, conditions, and other action properties;
  • After pasting actions, the pasted actions are selected;
  • Deselect actions when clicking elsewhere;

• ConditionViewer

  • Added options to expand/collapse all in the conditions right-click menu;
  • Expanded all conditions on load.
    (https://discord.com/channels/374517624228544512/1154813334835707957)

• ExpressionTextBox

  • MaxLength changed from default 32767 to 1000000 for scripting usage;
  • Corrected the parameter name error in the autocomplete Table method vlookup();
  • Fixed a calculation error in MaximumSize and adjusted the height;

• ActionForm

  • Added built-in text hints for variable operations and some of the other actions, integrating text hints for some actions like SendKeys;
  • Fixed a bug in the KeyPress action test: the text box says it would delay two seconds before execution, but actually there were no code for this delay;
  • Fixed the wrong output results of the keyboard recording tool in SendKeys action.
    (https://discord.com/channels/374517624228544512/599935468578144276/1152402243245588572)

• LogForm

  • When all levels of log types are checked, Select All is automatically checked;

• StateForm

  • Adjusted the column widths;
  • Fixed an issue that the named callback interface was not working, as the RefreshNamedCallbacks function originally had no content;

• BridgeFFXIV

  • Fixed the error where NullCombatant was defined but never initialized;
  • Changed attributes in ClearCombatant to empty strings to avoid confusion, like NullCombatant.x being 0 might be mistaken for querying an entity with x = 0;
  • Added all properties related to Jobs to the entity dictionary;
  • Replaced TranslateJob, TranslateRole functions with a dictionary defined in Entity.cs;

• Action

  • Fixed the issue where KeyPress, SendWindowMessage action descriptions did not support procid;
  • Added dictionary actions GetEntityByName / GetEntityById, table action GetAllEntities, to obtain single or all entity information at once;
  • Table action Resize can omit one of width/height to indicate that dimension remains unchanged;

• Context

  • Fixed the error of using greedy matching for variable names in some of the regexes;
  • Added two dynamic expressions _rowcl[...] _colrl[...] to return the cell value by its corresponding header (like tvarrl tvarcl);
  • Added ecallback:... to check for the existence of a named callback;
  • Fixed the error of placing table contain and ifcontain methods in the dictionary variable code block;
  • Changed func:pick():string to split string based on the same logic as splitting parameters, instead of simply splitting by comma.

• Interpreter

  • Error messages specify the exact API name when API is restricted;
  • During script execution, catches AggregateException and generates corresponding error messages;
  • Added SetDictVariable and GetDictVariable;
  • For SetXXXVariable, deletes the variable if the provided variable parameter is given as null;

• MathParser

  • Added operator ??: If the previous parameter cannot be parsed as a number, then returns the next parameter, similar to the null coalescing operator.
    e.g., 1 ?? 2 = 1, A ?? 2 = 2;
  • Fixed an error of the value range of the roundir / roundvec functions;
  • Added direct input support for hexadecimal, binary, octal, like 0xFF, 0b11, 0o77;
  • Added condition checks for situations where a ${...} expression returns an empty string causing ==, ?? to be at the start or end of tokens list

• RealPlugin

  • Verified the content of the last line of the temp file when saving configurations, attempting to fix issues of incomplete file ends caused by abrupt ACT exit during StreamWriter.write;
  • When loading the configuration file, check the last line to judge if the file is corrupted. If so, the .previous backup file will be automatically loaded.
  • Fixed a rare null reference exception in ReadyForOperation function;
  • Added overloaded RegisterNamedCallback and UnregisterNamedCallback functions for adding/removing callbacks by name in scripts.

2023/9

MathParser

The core of the MathParser had been mainly rewritten:

Parsing Minus Signs:

Several bugs in the parsing logic for minus signs have been fixed:

• The original code only checked the preceding character to determine if a +/- was a sign or an operator. This oversight caused incorrect parsing of expressions like func(1, -1) or 1 - -1.
  • Related: #87
• In the function BasicArithmeticalExpression(), only positive values were handled when applying a minus sign, neglecting non-positive values. This led to incorrect parsing of expressions like -(-1) into -1.
  • Related: Discord
• The original code gave the minus sign a hidden highest priority over other operations, leading to errors in the calculation order, such as -2^2 = 4 (whereas the answer should be -4 in most modern languages).
• The original code failed to recognize the - in -func(args) as a minus sign, causing errors in expressions like 0 = -sin(0). The code would attempt to apply a minus operation between = and sin(0).
  • Related: Discord

These bugs have been fixed, and the entire logic for handling +/- signs has been rewritten for simplicity. Previously, special logic was used to treat +/- in both the lexer and the parser. Now, the lexer tokenizes every +/- without discrimination, leaving simple logic in the parser to handle them correctly.

Lexer Logic

• The lexer has been simplified to focus only on whether the current character is part of an operator. It then separates operators from non-operator characters.
• This logic passes the invalid inputs to the parser, and the parser now can raise errors detailing which operator in which expression could not be parsed.
• The earlier lexer tried to add * between expressions like 3abs(0), but this approach is not correct both in logic and in code:
  • Distinguishing between 3ab in 3abs(0) and the hex number 3ab is not possible without scanning the entire list of functions to match names;
  • The code would never give it a chance to consider a as the first character of the token to apply this logic, when there is a 3 in front of it.
• Since it needs excess time for scanning the whole list of functions to match the expression, this is not changed and an explicit * between numbers and functions/constants is still required.

Operators

• The parser now supports unary, ternary, and right-associative operators, in addition to the previously supported single-character left-associative binary operators.
• The following operators have been added:
  • && || ^^ !: logical AND / OR / XOR / NOT
  • %% //: real mod and exact division
  • √: sqrt()
  • >= <= != as aliases
  • == the only string operator: string equal to. DD5 == DD5 = 1.
  • & | ⊕ ~ << >>: bitwise operations (useful for representing the state of multiple entities appearing in random locations using a single variable)
  • ? :: ternary operator
• All operators in order:
  • √ ! ~
  • ^ % %% / // * - +
  • << >>
  • > ≥ >= < ≤ <= ==
  • = ≠ !=
  • & ⊕ |
  • && ^^ ||
  • ? :
  • ( ) , (not parsed directly)

Precision Error Tolerance

• The tolerance level has been changed from double.Epsilon to a constant (set to δ = 1E-9), making it more suitable for Triggernometry use.
• This rule only applies to functions and operators involving (explicit or implicit) comparisons, like = > >= sign truncate, etc.
• This rule will not reduce any computational accuracy.
• Values within the range x ± δ will be considered equal to x during comparisons.

Aliases

• In the original code, a list of aliases (e.g., atan2 => arctan2) existed but was not utilized.
• Those lines of code have been removed due to being irrelavent with Triggernometry requirements, and the aliases have been directly incorporated into the list of functions.

Spaces

• Spaces are now stripped from the expression before parsing to simplify the logic.
• Side effect: Numerical string functions can no longer include meaningful spaces within their arguments (though this type of function was not previously supported).

Arguments

• The original SplitArgument function generated incorrect args lists when encountering unmatched quotes or consecutive commas, and it also did not support line breaks.

• The edited code now employs regular expressions to precisely extract all parameters situated between the string's beginning, end, and commas.

• Unquoted expressions are trimmed; empty or unquoted whitespaces return an empty list.

• e.g. (1,2, 3 ," 4 ", "5" , "'", ', ', ) now translates to a list with the arguments:

• 1 2 3 4 5 ' , (empty).

• Arguments should not contain ) { } due to the parsing logic in expanding expressions, so the following escape rules are applied:

  • { should be escaped with full-width ｛ or __LB__;
  • } should be escaped with full-width ｝ or __RB__;
  • ( can be escaped with full-width （ or __LP__;
  • ) should be escaped with full-width ） or __RP__;
  • ｛ ｝ should be escaped with __FLB__ __FRB__;
  • （ ） should be escaped with __FLP__ __FRP__;

Indices and Slices

Negative Indices

• Indices now support negative values, counting backwards.
• This includes: substring; lvar; tvar; tvarrl; tvarcl; and the index/row/column text boxes in list/table actions.
• The previous keyword "last" now redirects to -1.
• e.g. ${tvar:myTable[2][-3]} returns the value in the 2nd column and the -3rd row.

Slices

• A slice expression like start:end:step can represent a series of indices starting from start, incrementing by step each time, and ending before end.
• This functionality closely resembles Python's slicing mechanism.
• All three integers can be omitted: a:b:c a:b: a::c :b:c a:: :b: ::c :: a:b a: :b :
• Indices support negative values; strings count from 0 and lists/tables count from 1, maintaining consistency with previous Triggernometry features.
• Slices (and indices) can be combined into a slices expression, such as: ":5, 7, 8:13:2, 16:" represents (0), 1, 2, 3, 4, 7, 8, 10, 12, 16, 17, (...to the end).
• Slice expressions are now commonly used in new features to combine multiple functions, enable "fake" higher-dimensional list/table operations in string expressions, and also to simplify expressions/actions without using loops.
• Note: "slices" is considered a single argument in functions and methods. If it contains a comma, enclose the slices expression in "" or ''.

Autofill

• Fixed a bug where autofill sometimes remained visible, such as after entering tvar: and still showing tvarrl;
• Added more types of autofill: list/table/dict methods; current variable/aura/const names; regex capture groups in the current trigger; dict keys and table lookup headers;
• The code now searches for the preceding unclosed { to provide smarter autofill suggestions; (e.g., ${lvar:xxx${var:yyy}${index}. will display list properties);
• The autofill box now appears directly below the matched strings;
• Fixed a bug where using the enter key to select an autofill suggestion in multi-line mode also inserted a line break;
• Increased the height (5 → 10) and width (→ max length of suggestions) of the autocomplete box;
• Added a debounce timer: a 200 ms countdown starts after text changes in the textbox and triggers the autofill logic. Any changes within this countdown reset the timer, preventing lag when typing quickly or holding backspace.

Dictionary Variables

• Finalized the definition of the previously unused VariableDictionary type and added corresponding expressions, methods, and actions.
• See below for details.

Expressions and Functions

Special Variables:

Expression	Description
_ETprecise	Provides the exact minutes in the Eorzean day. A more accurate version of _ffxivtime (_ET).
_idx	Dynamic expression. Represents the current index.
_col	Dynamic expression. Represents the current column index.
_row	Dynamic expression. Represents the current row index.
_col[i]	Dynamic expression. Represents the value of the row index i in the current column.
_row[i]	Dynamic expression. Represents the value of the column index i in the current row.
_this	Dynamic expression. Represents the value in the current grid.
_key _val	Dynamic expression. Represents the current key/value.
_clipboard	Current copied text in the system clipboard.
_config[x]	Returns some user configurations that would impact the results of user operations or triggers. (See Autofill form for details)

For details on dynamic expressions, refer to the actions section.

Numeric Constants:

Expression	Description
semitone	2^(1/12). The frequency ratio between 2 adjacent semitones.
cent	2^(1/1200). The frequency ratio between 2 adjacent cents.
ETmin2sec	35/12. The ratio between 1 ET minute and 1 real second.
δ	1E-9. The math tolerance for comparison. (check the previous part)

Numeric Functions:

Expression	Description	Examples
distance()	Now supports 2 sets of n-dimensional coordinates. Behaves the same as previous versions when n = 2.	distance(0,0,0, 3,4,12) = 13
projectdistance() projectheight()	e.g. Useful for calculations involving linear AoE.	projd(0,0, pi/6, -2,0) = -1 projh(0,0, pi/6, -2,0) = 1.732...
angle(x1, y1, x2, y2)	= atan2(x2-x1, y2-y1)	angle(100, 100, 120, 100) = 1.57...
relangle(θ1, θ2)	Considering θ1 as relative north, it returns the direction of θ2. Normalized to [-π, π).	relangle(0, -pi/2) = 1.57...
roundir(θ, ±n, digits = 0) roundvec(x, y, ±n, digits = 0)	Matches the given direction (in radians for roundir; dx/dy offsets for roundvec) to a direction in a circle divided into |n| segments, then returns the index of that direction. The sign of n indicates two division modes: north as a segment point or as a boundary between two segments, as shown below. digits specifies the number of decimal places for rounding; a negative value means no rounding. e.g. Useful for calculating the direction of an entity with multiple potential spawn points. Could be combined with func:pick(index) to easily output any direction as a string from radians or coordinates without complex arctan2 and mod calculations.	roundir(-1.57,4) = 1 (West) roundvec(8,-6,-4) = 3 (NE)

Numeric String Functions:

Expression	Description	Examples
parsedmg(hex)	Converts the given hex string for damage/healing in the 0x15/0x16 ACT log lines to the corresponding decimal value. Rule: Padleft the hex string with 0s to 8 digits as XXXXYYZZ, then convert ZZXXXX to decimal.	parsedmg(A00000) = 160
freq(note, semitones = 0)	Returns the frequency (Hz) of the specified note (using scientific pitch notation, accidentals represented as #, b, x) adjusted by the semitones offset.	freq(A4) = freq(G#4, 1) = freq(Bb4, -1) = freq(A5, -12) = 440
nextETms(XX:XX) nextETms(ETminutes)	Provides the time (ms) remaining until the next specified Eorzean time.	The current ET is 1:00: nextETms(2:00) = nextETms(02:00.00) =nextETms(120) = 175000(2 min 55 s)

String Functions:

Expression	Description	Examples
parsedmg	Same as the numeric function. No arguments accepted.	func:parsedmg:A00000 = 160
slice(slices = ":")	Accepts a "slices expression" as an argument. Returns the specified slice of the string.	func:slice(-3):01234 = 2 func:slice(1:4):01234 = 123 func:slice(::-1):01234 = 43210 func:slice("1,3:"):01234 = 134
pick(index, separator = ",")	Separates the given string by the specified separator. Returns a substring based on the index, starting from 0. Also supports negative indices.	func:pick(3):north,west,south,east = east func:pick(-1,", "):1, 22, 3, 44, 5 = 5
contain(str) startwith(str) endwith(str) equal(str)	Returns 1 or 0.	func:contain(23):1234 = 1 func:endwith(23):1234 = 0 func:equal(23):1234 = 0
ifcontain(str, t, f) ifstartwith(str, t, f) ifendwith(str, t, f) ifequal(str, t, f)	Similar to if().	func:ifcontain(23, a, b):1234 = a func:ifendwith(23, a, b):1234 = b func:ifequal(23, a, b):1234 = b
indicesof(str, joiner = ",", slices = ":")	Searches for all indices in the specified slices of the string, then joins them.	func:indicesof(a):abcbabcba = 0,4,8 func:indicesof(a, "-", ::-1):abcbabcba = 8-4-0
match(str):regex	Returns 1 or 0. Note: regex should not contain { }. { should be escaped with full-width ｛ or __LB__; } should be escaped with full-width ｝ or __RB__; ｛ ｝ must be escaped with __FLB__ __FRB__. Same regex rules apply to the next two functions.	func:match(404D):404[B-D] = 1 func:match(4000A3BF):4.｛7｝ = 1
capture(str, group):regex	Returns the captured string $groupindex or ${groupname}. If groupindex = 0, it returns the entire matched string. If groupname isn't found or groupindex is out of range, it returns an empty string. Adheres to the previously mentioned regex rules.	func:capture(Player NameGilgamesh, server):.+ .+(?<server>[A-Z].+) = Gilgamesh
ifmatch(str, t, f):regex	Similar to if().	func:ifmatch(404D, a, b):404[B-D] = a
replace(oldStr, newStr = "", isLooped = false)	Replaces one string with another in the specified string.	func:replace(" "):1 2 3 = 123 func:replace(aa,a):aaaaaa = aaa func:replace(aa,a,true):aaaaaa = a
repeat(times, joiner = "")	Repeats the string the specified number of times.	func:repeat(3):a = aaa func:repeat(3, +):1 = 1+1+1
padleft padright trim trimleft trimright	These functions now accept character arguments either as the character itself or its charcode. 0-9 are interpreted as characters rather than charcodes since ASCII 0-9 control characters are rarely used here. Numbers ≥ 10 are seen as charcodes. No need for the 5-digit charcodes of CJK-region characters (including full-width spaces).	func:trim(48, 2, a):abcd0320 = bcd03 func:padleft(0,8):1ABCD = 0001ABCD

List Variables:

• This section uses lvar:test = 1, 2, 3, 4, 5, 6, 7, 8, 9 (this string is only a representation of the list) for demonstration.

Expression	Description	Examples
${?lvar:...}	Builds a temporary list directly from the expression split by ,, and uses any properties on it to return a string. Uses the same splitting rule as for splitting arguments. Building a variable might be slightly slower, but it provides a way to combine multiple actions with conditions into a single action.	${?lvar:a, b, c, d, e.indexof(c)} = 3 ${?lvar:a, b, "c,c", d, e[3]} = c,c
sum(slices = ":")	Returns the sum of the values in (the slices of) the list. Only values that can be parsed into the double format are summed.	${lvar:test.sum} = 45 ${lvar:test.sum(1:5)} = 10
count(str, slices = ":")	Returns the number of times the string appears in (the slices of) the list.	${lvar:test.count(3)} = 1 ${lvar:test.count(a)} = 0
join(joiner = ",", slices = ":")	Joins (the slices of) the list using the specified joiner.	${lvar:test.join} = 1,2,3,4,5,6,7,8,9 ${lvar:test.join(" ",5::-1)} = 5 4 3 2 1
randjoin(joiner = ",", slices = ":")	Similar to join(), but the selected elements are shuffled before being joined..	${lvar:test.randjoin} = 4,9,2,3,5,7,8,1,6 (random example)
contain(str, slices = ":")	Returns 1 if (the slices of) the list contains the given string, otherwise 0.	...contain(3) = 1 ...contain(3, 4:) = 0
ifcontain(str, trueExpe, falseExpr)	Similar to if(). If the list contains the string, returns trueExpr; otherwise, returns falseExpr.	...ifcontain(3, found, missing) = found ...ifcontain(a, found, missing) = missing
indicesof(str, joiner = ",", slices = ":")	Searches for all occurrences of the string in the given slices of the list and joins the indices into a string. Similar to the string function.
max(type = "n", slices = ":") min(type = "n", slices = ":")	Returns the extremum value in (the slices of) the list, depending on the type: n for numeric, h for hex, s for string.	${lvar:test.max} = 9 ...min(n, 3:) = 3

Table Variables:

• This section demonstrates using the following tvar:test:

11	21	31	41
12	22	32	42
13	23	33	43
14	24	34	44

Expression	Description	Examples
${?tvar:...}	Builds a temporary table directly from the expression split by , and |. Similar to ${?lvar:}.	`${?tvar: a,b
tvardl: ptvardl:	Double-based lookup similar to tvarrl:/tvarcl:. Returns the value identified by the column and row headers.	${tvardl:test[41][13]} = 43
sum(colSlices = ":", rowSlices = ":")	Returns the sum of the values in (the sliced rows and columns of) the table. Only values that can be parsed into the double format are summed.	${lvar:test.sum} = 440 ...sum(1, :) = 11 + 12 + 13 + 14 = 50
count(str, colSlices = ":", rowSlices = ":")	Returns the number of times the string appears in (the sliced rows and columns of) the table.	${lvar:test.count(33)} = 1 ${lvar:test.count(1)} = 0
hjoin(joiner1 = ",", joiner2 = "⏎", colSlices = ":", rowSlices = ":")	Horizontally joins the table using the specified joiners.	...hjoin(",", ",", 1:3, 3:) = 13,23,14,24 ${tvar:test.hjoin} = 11,21,31,41 12,22,32,42 13,23,33,43 14,24,34,44
vjoin(joiner1 = ",", joiner2 = "⏎", colSlices = ":", rowSlices = ":")	Vertically joins the table using the specified joiners.	${tvar:test.vjoin} = 11,12,13,14 21,22,23,24 31,32,33,34 41,42,43,44
hlookup(str, rowIndex, colSlices = ":")	Searches for the string in the given row and returns the column index. If not found, returns 0.	...hlookup(13,3) = 1 ...hlookup(13,3,2:) = 0
vlookup(str, colIndex, rowSlices = ":")	Searches for the string in the given column and returns the row index. If not found, returns 0.	...vlookup(13,1) = 3
max(type = "n", colSlices = ":", rowSlices = ":") min(type = "n", colSlices = ":", rowSlices = ":")	Same as the list method.	(omitted)

Dict Variables:

• This part uses dvar:test = a=1, b=2, c=3, d=3, e=3 (this string is only a representation of the dictionary) to demonstrate:

Expression	Description	Examples
${?dvar:...}	Builds a temporary dict directly from the expression split by =, .. Similar to ${?lvar:}.	${?dvar: 7CD2=in, 7CD6=out, 7CD7=spread [7CD2] } = in
sumkeys() sum()	Sum all the keys/values that can be parsed into double format.	${dvar:test.sumkey} = 0 ${dvar:test.sum} = 12
count(value)	Returns the count of the given value in the dict.	...countvalue(3) = 3
dvar: edvar: pdvar: epdvar:	e (existing) / p (persist). Similar to other variables.	${epdvar:dictname} ${dvar:test[e]} = 3
length / size	The number of keys in the dict.	${dvar:test.size} = 5
ekey(key) evalue(value)	Check if the key/value exists in the dict (returns 0/1).	${dvar:test.ekey(a)} = 1 ${dvar:test.evalue(4)} = 0
ifekey(key, t, f) ifevalue(value, t, f)	Similar to string functions (returns string t/f).	...ifekey(a, found, missing) = found
keyof(value)	Reverse lookup by value. Returns the first found key or an empty string if not found.	${dvar:test.keyof(1)} = a ${dvar:test.keyof(4)} = ``
keysof(value, joiner = ",")	Lookup all keys matching the given value and join them with the joiner.	...keyof(3) = c,d,e
joinkeys(joiner = ",") joinvalues(joiner = ",") joinall(kvjoiner = "=", pairjoiner = ",")	Combine the keys/values/both using the joiners.	...joinkeys(-) = a-b-c-d-e ...joinall = a=1,b=2,c=3,d=3,e=3
max(type = "n") min(type = "n") maxkey(type = "n") minkey(type = "n")	Same as the list methods.	(omitted)

Job Properties:

• ${_job[XXX].prop}: returns the property of the specified job.
• Properties:
  • role; job; jobid (same as _ffxiventity)
  • isT; isH; isTH; isD; isM; isR; isTM; isHR; isC; isG; isCG; (0 or 1)
  • jobCN; jobDE; jobEN; jobFR; jobJP; jobKR; (full names in different languages)
  • jobCN1; jobCN2; jobEN3 (= job); jobJP1 (abbreviations of varying lengths)
• jobXX, jobXXn, jobid could be used as the key XXX in ${_job[XXX].prop}.
• These properties are also included in _ffxiventity and _ffxivparty.
• e.g.
  • ${_job[Gladiator].jobid} = 1;
  • ${_job[1].jobFR} = Gladiateur;
  • ${_job[GLA].jobCN1} = 剑;
  • ${_ffxiventity[Gladiator Player].isTM} = 1

Entity Properties:

• Several entity properties have been added to ${_ffxiventity} and ${_ffxivparty}:
  • bnpcid, bnpcnameid, ownerid, type, partytype, address
  • castid, casttime, maxcasttime, iscasting

Abbreviations to Enhance User Experience:

• Expressions can become extremely long when working with complex logic, which may involve several nested ${} instances.
• To alleviate this, several abbreviations have been introduced to shorten these expressions:

Full	Abbrev.
${numeric:...}	${n:...}
${string:...}	${s:...}
${func:...}	${f:...}
${exvar:...}	${ev:} ${el:} ${et:} ${ed:}
${(p)var:...} ${(p)lvar:...} ${(p)tvar:...} ${(p)dvar:...}	${(p)v:} ${(p)l:} ${(p)t:} ${(p)d:}
${?lvar:...} ${?tvar:...} ${?dvar:...}	${?l:} ${?t:} ${?d:}
${_loopiterator}	${_i}
${_ffxiventity[...].prop}	${_entity[...].prop}
${_ffxivparty[...].prop}	${_party[...].prop}
${_ffxivplayer}	${_me}
${_ffxiventity[${_ffxivplayer}].prop}	${_me.prop}
indexof()	i()
_ffxivtime	_ET
pi	π
distance()	d()
projectdistance()	projd()
projectheight()	projh()
angle()	θ()
relangle()	relθ()
(table) .width	.w
(table) .height	.h
(table) .hlookup()	.hl()
(table) .vlookup()	.vl()
(entity) .heading	.h

Actions

Fixed a bug in the list method Insert and table variable Resize:

• The original code for the list variable inserted null directly as placeholders when the given index exceeded the length of the list. It should have used a new VariableScalar instead.
• This led to two issues: the parser was unable to retrieve these null values in expressions, and the list couldn't be double-clicked to view in the variable viewer due to an ACT error.
• Similarly, the code for table variables appended empty rows, setting each grid to null:
  • vtr.Values.AddRange(new Variable[newWidth]);
  • Rows[i].Values.AddRange(new Variable[newWidth - Rows[i].Values.Count]);

Fixed a bug in the list method Set:

• The original code inserted one fewer VariableScalar into the list as placeholders when the list needs to be expanded.
• This caused a problem when trying to set a value at a given index in a list with length index - 1. The result was an appended list that lacked the value to be set.

Fixed a bug in the list method Split:

• The original code did not adhere to the persistent options of the source/target variables.

Fixed a bug about the persistent button:

• It is not enabled but the option is still effective when unsetting all variables.
• Enabled the persistent button when selecting these actions.

Add dynamic expression support for the Set action of lists, tables, and dictionaries:

• List: _this _idx
• Table: _this _row col _row[i] col[i]
• Dictionary: _val

Updated PopFirst / PopLast actions for list variables:

• PopFirst was modified to accept an optional index argument, which also supports negative values.
• The action name PopFirst in the code remained unchanged, and PopLast was retained for XML compatibility reasons.
• However, the functionality of PopLast now redirects to PopFirst with index = -1.

Added PopToList actions (set/insert):

• Pop and insert
  • Pops an element from the source list and inserts it into the target list.
  • If the target index was not given, it would be appended to the end of the list.
  • Note: this is not the same as index -1, which inserts the value between the last 2 elements
  • e.g. source list: 1,2,3,4,5, source index: 3, target list: a,b,c,d,e
    • target index: 3 => a,b,3,c,d,e;
    • target index: -1 => a,b,c,d,3,e;
    • target index: => a,b,c,d,e,3;
• Pop and set
  • Pops a element and set it to the given index in the target list.
  • Both of the indices should be given.
  • e.g. other conditions same as above;
    • target index: 3 => a,b,3,d,e;
    • target index: -1 => a,b,c,d,3;
• These actions are just combinations of Pop and Set/Insert.
• The expression textbox is used as the target index input, and the descriptions and label instructions would be changed automaticlly.

Added basic actions for dict variables:

• Unset, UnsetAll, UnsetRegex
• Set: Assigns a value to a key.
• Remove: Removes a specified key if it exists.
• Merge: Combines dictionaries but leaves repeated keys unaltered.
• MergeHard: Combines dictionaries and overwrites any repeated keys.

Added Build action for list/table/dict variables:

• Build a list variable by using the first character of the expression as the separator, with the remainder of the expression as the input string. For table variables, the first two characters serve as the column/row separators. For dict variables, the first two characters act as the key-value pair separator and the overall pairs separator.
• This allows for the easy creation of lists/tables directly from a given string with a single action.
• Further, one can generate a list from a slice of another list or a row/column of a table in a single step when combined with list.join, table.hjoin, or table.vjoin.
• e.g. The expressions ,1,2,3,4,5,6,7,8,9 and ,|11,21,31,41|12,22,32,42|13,23,33,43|14,24,34,44 can build the previous lvar:test and tvar:test;
  =,a=1,b=2,c=3 can build the dictionary a=1, b=2, c=3.

Added SetAll action for list/table/dict variables:

• Provides a flexible method to assign values to a list/table/dict variable, similar to the Select() in LINQ expressions.
• The dynamic expressions below can be utilized when traversing the entire variable:
  • List variables: ${_this} ${_idx}
  • Dict variables: ${_idx} (when a dict length is specified) or ${_key} ${_val}
• For table variables: ${_this}, ${_row}, ${_col} can be used.
• e.g.
  • Using the SetAll action with the expression ${_idx} on a list (length = 9) produces lvar:test with values (1-9);
  • Then, using SetAll with the expression ${_this}^2 on lvar:test results in 1, 4, 9, ..., 81.
  • For a dictionary of length 5, using key expression ${_idx} and value expression ${_idx}^2 produces a dictionary 1:1, 2:4, 3:9, 4:16, 5:25.
  • Applying the key expression ${_value} and value expression ${_key} reverses it to 1:1, 4:2, 9:3, 16:4, 25:5.

Added Filter action for list/table/dict variables:

• This is similar to the Where() function in LINQ expressions.
• Filters elements of a list to a new list, grids of a table to a new list, rows/columns of a table to a new table, or key-value pairs of a dict to a new dict, based on whether the dynamic expression evaluates to true (!= 0).
• For example, the expression ${func:ifequal("", 0, 1):${_this}} eliminates empty elements;
• ${lvar:listname.indexof(${_this})} = ${_idx} removes duplicate elements in the list named listname;
• Using the expression ${_ffxiventity[${_this}].distance} > 15 && ${func:ifequal(DPS):${_ffxiventity[${_this}].role}} on a list containing player names filters out DPSs located more than 15 m away from the player.

Added SetLine / InsertLine action for table variables:

• Similar to the Build action for lists, it splits the expression into a list based on its first character. Depending on the provided index (row/col), the list of values is then set/inserted into the specified row/col. This counting - - logic is similar to that of the Set / Insert actions for list variables.
• e.g. Using the SetLine action with a row index of 3 and the expression ,a,b,c,d,e on the prior lvar:test yields:
  |11|21|31|41||
  |---|---|---|---|---|
  |12|22|32|42||
  |a|b|c|d|e|
  |14|24|34|44||

Added RemoveLine action for table variables:

• This action removes a specified row/column from a table.
• For instance, removing row index 3 from the previous lvar:test results in:
  |11|21|31|41|
  |---|---|---|---|
  |12|22|32|42|
  |14|24|34|44|

Added SortByKeys for lists, and SortLine for tables:

• These actions sort based on the specified key functions, proving useful for scenarios involving multi-criteria sorting, such as in TOP dynamis.
• Key functions format: n+:key1, n-:key2, s+:key3, ...
  • n/s: numeric/string comparison
  • +/-: ascending/descending (the + is optional)
  • key: should include ${_this} / ${_idx} for lists, ${_row} or ${_row[i]} for row sorting, ${_col} or ${_col[i]} for column sorting.
• If an function contains commas, or starts/ends with spaces, it should be enclosed in quotes, like "s+:key", ... or 's+:key', .... e.g.
  • n+:${_this} n-:${_this} s+:${_this} s-:${_this} correspond to the previous four sorting actions.
  • Sorting by n-:${_idx} reverses the list.
  • Sorting the list [11, 12, 13, 21, 22, 23, 31, 32, 33] with the functions n-:${f:substring(0):${_this}}, n+:${_idx}%3 produces [33, 31, 32, 23, 21, 22, 13, 11, 12].

Unset all types of variables matching the regex (in the scalar variable tabpage)

• This will unset the scalar, list, table, dictionary variables in one step.
• The persistant option is still respected: unsetting the session vars would not affect persistent vars.
• Useful when initiating a raid phase.

Copy the Value of the Variable/Expression to the Clipboard (in the Scalar Variable Tabpage)

• If the variable name is provided, its value will be copied directly to the clipboard without any parsing.
• If only an expression is provided, it will be interpreted as a string expression and then copied to the clipboard.
• Note: Actually, this doesn't necessarily involve scalar variables. To set a scalar variable to the clipboard, you can simply input ${var:name} in the expression (unless your clipboard contains ${...} expressions). I have organized it this way just to logically group this clipboard operation under the scalar variable category, avoiding the creation of a separate tabpage which could further slow down the action form loading.

Introduced the folder action "Cancel All Actions of Triggers Within Folder"

• Related issue: #48

Refined Actions List Order

• Reorganized the actions, list actions, and table actions into a more logical sequence.
• Additionally, replaced several opTypes that were hardcoded as integers with their corresponding enums.

Adjusted Tab Index in Action Form

• Only allow the selection between textboxes when switching with Tab.
• Also corrected some orders.

Expression Textbox

• Add a Color ExpressionType enum to let the textbox show the input as its background color;
• Change the textbox bgcolor to light blue if the related persistent switch is on.
• Add a light yellow warning color when the numeric/string expression textbox contains an alphanumeric ${...} expression that is not a capture group or a special variable (like _since).
• In multiline mode, change from a fixed height of 100 to a height limit of 100-300, dynamically adjusting according to the text height.

Trigger Form / Action Viewer

• Added arguments to represent if the variable is persistent and if the expression is numeric/string in the action descriptions (and also log messages);
• Added a [Sync] prefix to the description if the async option of an action is unchecked;
• Added a warning color when an action has a non-zero delay and the description text is overridden (this usually happens as a mistake when copying and editing actions, and it is hard to debug);
• Added color options in the action description page to allow customized bg/text colors in the descriptions; (format: Lavender / 230,230,250 / #e6e6fa / #eef)
• Added the buttons Move to top and Move to bottom, and enabled the moving of multiple selected actions;
• Added the button Undo to enable the undo of movement / delete of actions for one step;
• Add action now insert the action under the selected line instead of set it to the bottom;
• Save changes button would change into Save and Fire if autofire is enabled;
• Added a trigger description label on the bottom showing some info about conditions, source, refire options, sequential, etc;
• Added a message box to confirm quiting without saving the trigger;
• Deselect the action rows when clicking elsewhere.

Log Form

• Added more precise error information in the logs like which expression caused error when expanding expressions;
• Added custom log types (info < custom2 < custom < warning) which should contain no log from the program.
• Adjusted the warning / error log message colors to be less saturated instead of pure red/yellow, and also added a green color to the custom logs.
• Use checkboxes instead of comboboxes to filter logs (left-click toggles selection, right-click selects exclusively), which is much clearer:

Variable State Viewer / Editor

• Added support for dictionary variables;
• Added support for sorting the 8 types of variables by clicking their corresponding dgv table headers;
• Let the selected grid move to the next column / row after adding a column / row. (not changed for inserting);
• Fixed the bug that some columns could not be adjusted in variable state viewer: some columns were set to Fill, which forbids the adjustment of its column width if it is not the last column.

Main UI:

• Enabled the Add trigger / folder buttons when a local trigger is selected, which adds the trigger / folder to the parent folder, just like pasting triggers from xml;
• Similarly, enabled drag and move onto another trigger, which would moved the selected item into the parent folder;
• Automatically select the trigger/folder after drag and move;
• Added shortcuts:

Others

Bug Fixes:

• Func Without Parameters: Fixed an issue where string functions without arguments weren't parsed correctly.

  • Related Issue: #92
  • The original regex misinterpreted expressions like func:length:3*(1+2), which considers length:3* as the function name and 1+2 as the argument.
  • Modifications to the regex now allow it to correctly match the entire expression in a single step, instead of looking for the : later.
  • The regular expressions also underwent minor adjustments.

• Hi-Res Action Checkboxes: Rectified a bug causing action checkboxes to remain hidden on Hi-Resolution screens.

  • Related Issue: #91

• MessageBox Display: Addressed an issue causing the MessageBox to sometimes hide behind active windows. Now, MessageBoxes will always appear above the currently active window.

Enhancements:

• Linebreaks in Expressions:

  • Improved support for linebreaks which previously conflicted with argument splitting, code trimming, and regular expressions.
  • A special character ⏎ was introduced to act as a placeholder for linebreaks during parsing, which is replaced post-parse.
  • This character can also be used directly in Triggernometry expressions, for instance, ${func:repeat(5, ⏎):text}.

• Translations:

  • Updated and revised several hundereds of missing translations since version 1.1.6.0.
  • Updates have been applied to both CN/JP translation files. (Note: The FI/FR files were notably outdated, with jumbled orderings.)
  • Fully revised CN translations.

• Trigger Firing Settings:

  • Previously the triggers would ignore all contidion checks when manually fired, but sometimes we want it to respect all conditions.
  • Enhanced manual trigger firing to optionally respect conditions through the Fire (Allow Conditions) right-click menu option.
  • Also, introduced an Allow conditions for autofiring setting for triggers.

• Test Action: Introduced a Test action with live values (ignore conditions) option and a corresponding default configuration setting to bypass conditions during tests.

• CSV Export: Enhanced support for table variables that contain commas and double quotes, providing more accurate exports, instead of simply joining together with ,.

• Miscellaneous Adjustments:

  • Optimized some repeated codes;
  • Added CultureInfo.InvariantCulture to some of the Parse() and ToString() functions that missed localization settings.
  • Corrected typos.
  • etc.

Different Behaviours

Besides the bug fuxes and UI adjustments, the following behaviors are different comparing with the old version:

• Mathparser Adjustments:

  • The : character is now part of the ? : ternary operator.
  • The ^ operator is now right-associative.
  • The precision error tolerance is set to 1E-9 (i.e., 0.1234567890 = 0.1234567899 is considered true).
  • Check the previous section for details.

• Input Validation: Some of the undefined or invalid inputs, which previously returned default values `` or 0, now raise specific error messages.

• Beep Frequency: The default beep frequency is not out-of-tune anymore (C6, 1046.5 Hz).

Known Issues

• Dynamic Variables: Variables like ${_idx} aren't thread-safe and should be used exclusively with synchronous actions.
• Math Parser Limitations: Doesn't support operators sharing the same priority level and not fixed in this version.
• Dictionary Editor Display: Dictionary variables now list keys in their intrinsic order instead of a sorted manner.
• Performance: Loading the action form has been notably slow (~0.8-2 s) from long time ago, possibly due to the expanded variety of actions. I am not familiar with WinForms and I am wondering if it could be fixed.
• Autofill: Occasionally the autofilled regex groups are not updated after the trigger regex has been edited. Could be fixed by clicking the regex textbox.
• An error was once reported upon clicking the action, but it could not be reproduced.

System.ArgumentOutOfRangeException - Index out of range.
   in System.Collections.ArrayList.get_Item(Int32 index)
   in System.Windows.Forms.DataGridViewSelectedRowCollection.get_Item(Int32 index)
   in Triggernometry.CustomControls.ActionViewer.btnEditAction_Click(Object sender, EventArgs e)
   in Triggernometry.CustomControls.ActionViewer.dgvActions_CellDoubleClick(Object sender, DataGridViewCellEventArgs e)
   in System.Windows.Forms.DataGridView.OnCellDoubleClick(DataGridViewCellEventArgs e)
   in System.Windows.Forms.DataGridView.OnDoubleClick(EventArgs e)

Current To-do List

• Detailed action descriptions
• review
• Show the count of errors
• combobox row height (written but not used: the customized drawing caused the loading time changed from 1 s to 3 s)

Future

• ReadMemory
• More entity data from memory
• Global font settings
• Aura font size
• More intelligent autofill: close the brackets, move the cursor, and refresh the autofill form.
• RichTextBox
• Dictionary Variable Editor (Sort)
• Vector and matrix
• Add customized exceptions to the math functions (need to tolerate with testmode and the exptextbox bgcolor logic).
• _color[x][y]
• deselect actions in loop dgv