Retro Arcade using the Pocket Beagle
is the device tree overlay. This file sets the display type and GPIO's necessary for the 2.8" TFT LCD and Gamepad. You will need to compile the overlay to a .dtbo and place the file in the /lib/firmware folder. (You can use the provided .dtbo file in place of compiling your own)
is a simple script that will setup your PocketBeagle to connect to the internet over a shared network connection using the micro USB.
is the modified configuration file. You will need to either add this file or replace this file at /home/debian/.advance
is a simple script that the advmame.service calls out to start a specific ROM, this will allow you to edit this script if you choose to change ROM's
startup service to boot advmame and specified ROM on powerup. Needs to be placed in /lib/systemd/system. To enable and start service use the following commands,
- sudo systemctl enable advmame.service
- sudo systemctl start advmame.service
https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=4c7bc987e1 Pricing will vary depending on options.