M.I.B. - More Incredible Bash

All bastards who stolen and selling this should be fucked🖕

NOT FOR COMMERCIAL USE - IF YOU BOUGHT THIS YOU GOT RIPPED OFF!

M.I.B. is distributed under the GNU General Public License v2.0. See LICENSE for more information.

Check https://github.com/Mr-MIBonk/M.I.B._More-Incredible-Bash/wiki for even more details about M.I.B and your MHIG/MHI2/MHI2Q unit.

NOTE:

• M.I.B. is running on Harman MHIG (MIB1 High) and MHI2/MHI2Q (MIB2 High) units only.

• Minimum requirement to run M.I.B. in GEM is GEM version 4.1+.

• Old GEM of most units with old FW versions will automatically be updated to GEM 4.12 during M.I.B installation.

• Make sure, that you always run latest M.I.B version --> https://mib.mibsolution.one & https://github.com/Mr-MIBonk/M.I.B._More-Incredible-Bash

• For additional Information check https://github.com/Mr-MIBonk/M.I.B._More-Incredible-Bash/wiki & https://mibwiki.one

CAUTION:

• Ensure that a external power is connected to the car during any flash or programming process!
• It is not recommended to flash with running engine!
• Power failure during flashing/programming will brick your unit.
• All you do and use at your own risk!

M.I.B Functions:

• Go here for a full overview of all GEM functions
• Patch ifs-root
• SVM fix
• POG11 AndroidAuto button fix
• POG24 & BYG24 AndroidAuto & CarPlay Widescreen Patch

Prepare SD card:

• Extract all files of the M.I.B. to the root folder of a clean FAT32 formatted SD card
• Make sure that your SD card is not write protected.
• Patched IFS-stage2 images have to be placed on the SD card in the folder /patches
• Pre-patched (CP, FEC and EL) ifs-root-stage2 images can be found for all recent MHI2 FW versions here: https://mib.mibsolution.one
• You only have to copy the folder(s) you need for your car(s) - e.g. /patches/MHI2_ER_SKGxx_Pxxxx_MUxxxx_PATCH
• They are already prepared in the right way, so that the tool can use them right away

There is also a example video guide available now:

FEC Generator:

• M.I.B is generating custom FecContainer.fec files based on existing FecContainer.fec and addfec.txt in patch folder.
• addfec.txt can be edited with any ASCII editor (Notepad++). DO NOT change EOL. Only not yet existing FECs will be added to container during the process.
• Do NOT change FECContainer.fec with WhatTheFec tool, it will break file signature. M.I.B method will keep original FECs intact.

ExceptionList BUG

• If your unit was patched with M.I.B before April 2021 run "Add new Fecs to FecContainer.fec" script in M.I.B -> PATCH.
• This will switch over to FecContainer.fec based patch and avoid EL BUG - unit will get stuck during boot.

M.I.B. in Green Engineering Menu - GEM:

• After M.I.B SD card is prepared
• Insert the SD card into slot SD1 of your unit.
• Enter Engineering/Red Menu to start SW Update. Select UPDATE, select SD card, select "FREE for all - M.I.B. Launcher V1.2", START update.
• Installation of M.I.B. on your Unit will start. The unit will restart three time until update process is finished.
• GEM will be activated as part of the installation.
• SVM error has to be cleared via M.I.B. function in GEM after installation
• Enter GEM on your unit
• Select ==>>m.i.b<<== in GEM and have FUN!

IMPORTANT! SD card must be presented in SD slot 1 (SD1) to enable M.I.B. in GEM. --> no SD no M.I.B.

• GEM screen layout is designed for 9.2'' screens but should work OK on 8'' just some text lines may look cut

Update to new M.I.B. version:

• No need to reinstall M.I.B if you want to use a new version.
• Just create a fresh SD with latest M.I.B. version and insert into unit.

---

Old way, D-Link Method: Connect to MHI2 and start M.I.B.:

• This method is still available in M.I.B, but no longer fully supported.
• Basic functions are still available - Full functionallity is only given via GEM
• D-Link - e.g. DUB-E100 HW rev. D1 - USB-Ethernet adapter is required to connect to your MHI2 unit.
• Use Putty/Kitty to connect via UART or Telnet (MIB IP:172.16.250.248) and login into RCC (recommended: port:123) or MMX (port:23).
• Login and password for your units SW train has to be known.
• Check your SW-train, a pre-patched ifs-root-stage2 has to be present within the folder /patches
• Insert the SD card into slot SD1 of your MHI2 unit and login to the RCC shell:

Mount SD card in slot SD1

• mount -uw /net/mmx/fs/sda0/

Start M.I.B by typing

• /net/mmx/fs/sda0/start

• Default screen size of Putty/Kitty is often too small to display the M.I.B. menu in full.

• Increase the window size manually.

CONTACT:

• GITHUB: https://github.com/Mr-MIBonk/M.I.B._More-Incredible-Bash
• Telegram Channel: https://t.me/joinchat/EHt4RRksHcMQk6Xi6tFaBw
• Wiki: https://github.com/Mr-MIBonk/M.I.B._More-Incredible-Bash/wiki & https://mibwiki.one
• Get in contact with us to get support and provide feedback about M.I.B.

Supporting Documents:

https://mibsolution.one

user and pass: guest