Pre-V3.7.0 - MHIG Edition

[harman-f]

https://github.com/Mr-MIBonk/M.I.B._More-Incredible-Bash/releases/tag/V3.7.0

[uDEV2019]

Is there a posibility that the Live patch feature for MHIG will come for MHI2/MHI2Q in near future also?

[harman-f]

Yes, technically already possible. Just the DB with all patch information in not collected for MHI2 yet.

[harman-f]

If you have python skills you can support this.

[uDEV2019]

Sorry, no python skills in front of my keyboard :-/

[Burspoke]

If you have python skills you can support this.
@harman-fdo you have a copy of Mhig_eu_au_k1555 you are could send me please?

[Tapisvolant23]

So we have to update FW to MHIG EU AU K1555 (for example) and no need to add patches in the folder inside MIB 3.7.1 ? thank you

[Tapisvolant23]

@harman-f
Is that right with this fw ?

[Tapisvolant23]

do we need a special patch for the MHIG EU AU K1555? I can't find it in the PATCHES 20230926 folder on the MIBSOLUTION website

1. UPDATE FW
2. Run MIB with sd card; At this point do you need a patch?
3. update map

[Tapisvolant23]

So i have tried on A3 RS3 2016 - UNIT MHIG . MIB 3.7 Works fine. I will try to update map.

[Picsouf78]

Hello !
I can't install can I give me the solution?

[harman-f]

MIB.mibsolution.one

[Picsouf78]

I dropped the file in the "patches" folder of the SD card I patched the unit but it still does not work

[Tapisvolant23]

Have you find patches files?

[Picsouf78]

Yes

[Picsouf78]

But it didn't change anything.

[harman-f]

Could be your _1 train ending. Check if there is a folder with exactly that name.

You could also update to latest FW and patch that. There is a pre-patched AIO FW Update available.

[Tapisvolant23]

I think so. Does your fw .....p4512_1 appears in the patched list ? If not you must updgrade.

[Tapisvolant23]

If you are french i can help you. We can speak in PM in french.

[Picsouf78]

If you are french i can help you. We can speak in PM in french.

Super oui je suis disponible en PM

[Picsouf78]

It works! After updating the FW

Thank you all

[vanitoso]

Can you help me please?

[Picsouf78]

But navignore Not work with this FW ?

[Picsouf78]

Yes I have this message

[Picsouf78]

everything works, I had to install with the version 3.6.0 MIB

[Tapisvolant23]

Wich version did you try before 3.6 ?

[vanitoso]

hi, I installed mib and everything is ok but I can't install the vw alpine mod, it gives me an error and goes back to the stock skin, try to install skin 5 but nothing, still the same error, I have mib2high MHI2_ER_VWG13_P4521 MU1367, in my firmware only 3 skins, 0 basic, 1 current and 4 Arabic

[vanitoso]

[Picsouf78]

[Tapisvolant23]

Navignore only works if you have vitual cockpit ?

[harman-f]

Should also work without

[Tapisvolant23]

So i don t understand what is Navignore. Is there à link with Dual navigation in MIB ?

[harman-f]

Normally you can only start either CP/AA navigation or unit navigation. With nav ignore both can run at the same time.

[Tapisvolant23]

Is it possible to have in the same time Carplay and radio ? Because when i plug my phone radio is not available

[dec123ua]

Am successfully changing region from CN to EU, but after using script for automatic change data in EEPROM to EU, SDS_region_flag is still CN, and need change directly

[kpietrek]

I have an Audi A3 8V 2014. 2.0 TDI 184 HP. I would like to update the maps to the latest versions. I currently have maps 2014/2015. My navigation version is: MHIG_EU_AU_P1531. In the red menu I have the activation code: 02100018. I downloaded the latest maps using mib-helper. I also downloaded M.I.B. but I miss the patched software. Can you help me sort this out?

[Tapisvolant23]

Hi.

1. Update fw with k1555 version ( not necessary i think. But i have done it)
2. Patch with MIB 3.7 mhig edition
3. Update maps
   What s your problem ?

[kpietrek]

Could someone provide me with such software? Unfortunately I can't find one. I tried to make a patch on the current software but unfortunately there is a bug and it doesn't work. Maybe you need to change to this new software.

[Tapisvolant23]

How to contact you in Private message ?

[kpietrek]

May be e-mail: pietrek@emtronic.info

[Tapisvolant23]

mail sent

[Tapisvolant23]

The procedure has not ended; any idea of the origin of the problem? THANKS

[Tapisvolant23]

All ok now; it was due to a bad sd card.

[aledepaoligampel]

Hello everyone! I have an Audia A3 8V 2014. I was able to create the SD and execute the update with version 3.7.1. But I don't know how to enter the green menu and how to activate the maps. Can anybody help me? I have version MHIG_RW_AU_S0337.

[Tapisvolant23]

There is no way to talk in mp on github ?

[NishilAmin1213]

not sure, I can create a github repo and link it to you, that could work

[Tapisvolant23]

ok

[NishilAmin1213]

Should have sent you an invite, we can just talk in the comments section on the issue. I don't believe github has an actual messaging feature which is strange.

[Tapisvolant23]

i have sent you invitation

[Ryzza5]

I notice there were no ROW firmware versions available for Australia. Am I out of luck or is there a suitable substitute? I'm currently running MHIG_RW_AU_P1531_1 with navigation DB V03959801CF 0065 ROW 2017/2018

[Tapisvolant23]

Hi; i see RW AU k1556

Choose FIRMWARE
then AUDI

https://mibsolution.one/#/1/9/_pre%20MIB2/MHIG%20-%20HARMAN

[NishilAmin1213]

Hi, I have a 2015 Audi A3 e-tron with firmware MHIG_EU_AU_P1531_1, I would like to update it to MHIG_EU_AU_K1555 so I can install M.I.B and update the maps. Once I update the firmware does anyone know if I will lose the etron-specific area of the MMI that I have shown as attachments?
I plan to get the firmware from mibsolution here however it doesn't mention that it is for e-tron cars, and has been used by people with standard ICE cars. Hence I am unsure if it will contain the e-tron specific fields

[VWBOY]

Hi
I can not connect D-link with MHIG HARMAN through putty?
Pls which section do I need to check to connect D-Link with putty
Thank you very much

[Tapisvolant23]

hi; have a look on https://mibsolution.one/#/1/9/_pre%20MIB2/MHIG%20-%20HARMAN

or https://mibsolution.one/#/1/9/_pre%20MIB2

and clik line solution

if problem
id : guest
pass word: guest

[Cocsic]

Hi,
I have Golf mk7 and MIH2 Harmman, when I was trying to update FW by mistake erase almost all and now I have only shell mode available. Can you please help me to restore device? I need to restore partitions and I cannot find any information how to do it. Whole /usr/apps catalog is missing and modifye2p. When I try to flash it goes Ok but still is not working. My previous version was MHI2_ER_VWG11_S2125_MU0343 and now I was trying to use MHI2_ER_VWG11_K3342_MU1427.

Thanks.

[bogdanwst]

Hello everyone. I have an audi a3 8v made in 2015. I update the firmware to MHIG_EU_AU_K1555; i installed MIB 3.7.0; i made a backup in MIB (in green menu 4.12); then i executed patch_unit_aio in order to be able to update the maps.
The problem is that the fec shown in the REM is the same as the original one (0210001c).
The SVM-fix option in the MIB also did not work (i did it with vcds). Can you tell me how am i supposed to do so that i will be able to update the Maps? Thank you.

[Kemper197]

Have you found solution for disable fec check and to add code itself ?
I am also looking solution to disbable fec check as i have same mib and fw version.

[AudiTinker]

A huge thank you to all the contributors to this project!

Have a early model 2014 A3 all updated now. Was a bit of a journey but got there in the end.
The MHIG version I had was quite old and had to retry a few times. Sometimes would freeze on updating or had strange errors. Think it came down to the SD card I was using, switched to a samsung 32 from a sandisk 16 gig and seemed to have resolved it.

First issue I had was not knowing how to get into GEM, worked that out from another post but then the GEM version came up as 2.14. Updated the firmware and maps, but then couldn't view maps with a 'the navigation data are not enabled' message. Had to do a few starts and re-starts to get AIO working, but eventually was successful. Ended up with the correct activation key, but have two copies, one legal and one illegal, working fine though.

Open to any questions... cheers!

[aledepaoligampel]

Nice to read your experience. I have the same car with the same MHIG version, but i cant install RoW maps. All the time I get the message "the navigation data are not enabled". I have the same activation keys. When I installed GEM for the first time, I had to update from MHIG_RW to MHIG_EU to hack the maps, but you dont need that?

[AudiTinker]

Yes I got that message as well at first. Occurred when I updated the maps on the old firmware. At that stage I didn't patch properly/right FEC.

I didn't need to change to MHIG_EU. Went straight to the the RW K1556 firmware as shown. I suspect there is something wrong with the RW 2024 maps (P353). I'm unable to update to it and it has an invalid data error. Think your issue is incompatibility with the _EU firmware and version of maps. Try ROW P313 maps with the _RW firmware.

Actually just finished the update to ROW P333 maps today and working well, but still can't go further to P353.

When I did a OBDeleven scan, there was a static B126CF2 'navigation database not enabled' error. Think it was due to the illegal FEC I had. Tried to overwrite it by running the MIB FEC function again and it said successful, but still had both legal and illegal for 021d00ee.

Ran the clean SWDL function and it cleaned it up so only had legal ones now. Cleared the fault code and all good now with no errors.

[JohnnyCSilva]

Hi guys

Can you tell me if it was difficult to install M.I.B?
I've already updated everything to the latest version available (MHIG_EU_AU_K1555), but from the videos I've seen and the part about the green menu, at least in the key combinations page it appears that the a3 2015 doesn't have access to that screen, how did you manage to access that part?

I'm asking before I do anything, since I had prepared the SD card for version 3.6.0 and it looks like I'm going to have to install version 3.7.0. Do I have to place the MHI2 patches on the 3.7 folder?

Any help is welcome. Thank you

[AudiTinker]

Hi,
You're probably in a good place since you were able to update the firmware. The key combination is missing from that page but the green menu does exist. The combo is back and bottom left button (red menu being back and top left button). There is a bit of trick to get the button combo working. Press back a few times until you're back at the home screen, then press and hold back then quickly press and hold bottom left. GEM should appear in about 6 secs.

I used 3.7.1 and it should auto patch without needing to copy anything into the patches folder.

[Ryzza5]

Nice to see some more success. I gave up and went another route. I purchased and installed a bridge behind the centre console that adds wireless android auto/car-play using the stock screen and controls, so now have Google Maps and Waze at my disposal. Probably didn't cost any more than VAG would charge for a map DVD/SD card anyway. You'll find plenty of options on Ali Express, just find one that has lots of legitimate positive reviews.

[AudiTinker]

You're right, i was looking at the exact same thing. Good reviews on a unit at Ali express and seems well integrated with the factory controls. Anything to watch out for when installing? Tucked it above the MMI unit?

[Ryzza5]

Completely removing the glovebox helped but reinstalling it was tricky. My unit came with two wifi antennas, if I were to do it again I might have placed one a bit closer to the driver door for when I keep my phone in my pocket. Other than that it works fine installed behind the climate controls.

Only niggles are:

1. Module shuts down as soon as the engine turns off (keyless ignition) instead of when the driver door opens.
2. The star * button on the steering wheel was used for skipping tracks but is not recognised by the module, need to use the volume knob to skip. Impossible to skip when an OEM screen is being displayed, ie when the reversing camera displays.

Other than that it does the job reasonably well.

[JohnnyCSilva]

Hello @Ryzza5

I was thinking of upgrading my car, a3 8v, but I have a problem with the bluetooth, which disconnects and reconnects automatically, lasting a maximum of 30 seconds each connection, which probably means I'll have to reinstall the system to solve it, but I'll have to go to audi, but I'm not available at the moment.
Regardless, I intend to buy the carplay adapter module for the car, but first I'd like to know if you connect your mobile phone to the car's bluetooth or to the bluetooth of the module so that the screen shows carplay / android auto. Because if you connect it to the bluetooth of the module, I won't need to pay for a reinstallation of the system.

Thank you,

[Ryzza5]

Hello @Ryzza5

I was thinking of upgrading my car, a3 8v, but I have a problem with the bluetooth, which disconnects and reconnects automatically, lasting a maximum of 30 seconds each connection, which probably means I'll have to reinstall the system to solve it, but I'll have to go to audi, but I'm not available at the moment. Regardless, I intend to buy the carplay adapter module for the car, but first I'd like to know if you connect your mobile phone to the car's bluetooth or to the bluetooth of the module so that the screen shows carplay / android auto. Because if you connect it to the bluetooth of the module, I won't need to pay for a reinstallation of the system.

Thank you,

You disconnect from the car bluetooth and only connect to the carplay bluetooth.

[NishilAmin1213]

I have mentioned this before in this thread here however wondering if anyone has had any new discoveries.

This is essentially regarding updating the MMI of an A3 e-tron and whether I would lose the e-tron specific pages in the MMI.

Thanks in advance for any replies!

[Tapisvolant23]

can i update FW to K1555 with Bang and olufsen option ?

[hynejont]

A very helpful chat string for updating MHIG units - thanks everyone for the contribution .
A couple of questions to validate some things to avoid bricking my MHIG unit just to update the maps from a 2016/2017 version (Australia)

My current unit is :
MIB1 HIGH
MHIG_RW_AU_P1048

MIB Helper recommends:
MHIG_RW_AU_P1531 (MU: 0357) (https://mib-helper.com/index.php?train=MHIG_RW_AU_P1531)

Everything on this discussion string is referencing to patch to K155x:
MHIG_RW_AU_K1556 (MU: 0416)

1. I'm concerned about mine being on a Pxxxx SW Train currently and updating with a Kxxxx SW Train - what is the difference that the letter is signifying (P or K) and will it cause an issue if mine is on a P train ?
2. If it will brick it or is not compatible, I'm obviously happy to update to MHIG_RW_AU_P1531 but this does not seem downloadable on mibsolution.one site anywhere... ITs in the MIB backup directories but these are not downloadable.
3. Is it even worth upgrading and risking it. What features will the firmware upgrade give ? As far as Im aware it wont give native Carplay/AndroidAuto and I already have that with an aftermarket addon adapter. All that I can find is that it may give me the opportunity to update the native maps ... IS it worth it ? The only activation key i have at present (via red menu) is 021d0016

Advice would be really appreciated

[RUSTA-S3]

@hynejont You can contact me at rusta@optusnet.com.au

[RUSTA-S3]

Hello @hynejont. Just wondering if you still needed my help as I have not heard from you via email.

[hynejont]

thanks @RUSTA-S3 for all your help - I have emailed you directly

[Ryzza5]

Nicely done. Please tell me you've cleaned your screen since then haha.

[RUSTA-S3]

@Ryzza5. Yes I have cleaned my fingerprints from the screen.