ncum post operational v2.0.7

NCMRWF's in-house development pleased to release UMRider's next operational release v2.0.7 by focusing on NCUM-EPS-TIGGE-TEST mode after making pass by tigge_check tool and converting to single grib2.gz for each members.

what is new ?

• Bugs fixed in tigge and eps production.

• NCUM-EPS-TIGGE-PROD mode has been completed after making pass by tigge_check tool of each and every grib2 files, converting all vars, all levels, all time steps to single grib2.gz for each members and got acceptance acknowledge from ECMWF-TIGGE team.

• checkout the changlogs and milestone of v2.0.7

v2.0.7 supports

• In this version v2.0.7 (since v1.0.2) user will be able to control the following 40 arguments by exporting setup.cfg file into their environment variable called UMRIDER_SETUP. New arguments in this release are highlighted with bold.
  • UMtype
  • UMReanalysis
  • UMInAnlFiles
  • UMInShortFcstFiles
  • UMInLongFcstFiles
  • inPath
  • outPath
  • tmpPath
  • anl_step_hour
  • anl_aavars_reference_time
  • anl_aavars_time_bounds
  • fcst_step_hour
  • start_long_fcst_hour
  • end_long_fcst_hours_at_00z
  • end_long_fcst_hours_at_12z
  • latitude
  • longitude
  • targetGridResolution
  • targetGridFile
  • extraPolateMethod
  • pressureLevels
  • fillFullyMaskedVars
  • soilFirstSecondFixedSurfaceUnit
  • startdate
  • enddate
  • loadg2utils
  • overwriteFiles
  • anlOutGrib2FilesNameStructure
  • fcstOutGrib2FilesNameStructure
  • createGrib2CtlIdxFiles
  • convertGrib2FilestoGrib1Files
  • grib1FilesNameSuffix
  • removeGrib2FilesAfterGrib1FilesCreated
  • createGrib1CtlIdxFiles
  • debug
  • setGrib2TableParameters
  • wgrib2Arguments
  • write2NetcdfFile
  • callBackScript
  • convertVarIdx
• Also in this version v2.0.7 (since v1.0.2) user will be able to control the variables by exporting vars.cfg file into their environment variable called UMRIDER_VARS . User defined variables and ordered will be retained in the out grib2 files (but pressure level variables comes first and followed by non-pressure level variables)
• User will be able to control would they like to get 1-hourly or 3-hourly or 6-hourly or 24-hourly analysis and/or forecast files. (Note that NCUM model produces every 3-hourly instantaneous/ average/ accumulated data. Depends upon user choice it will be instantaneous or accumulated or averaged properly). Not suitable for IMDAA Reanalysis.
• This v2.0.7 supports for
  • **NCUM EPS TIGGE Production (TIGGE PROD mode) **
  • NCUM EPS Average for VSDB Input Production
  • NCUM EPS Global Post Production
  • NCUM Tropical Cyclone Tracker input Production
  • NCUM Regional Model Wind Energy Input Production
  • NCUM Global Solar Energy Input Production
  • NCUM Global Post Production
  • NCUM Indian Region Post Production
  • NCUM Global OSF Model Input Production
  • NCUM Global HYCOM Model Input Production
  • NCUM Global Solar Wind Energy Input Production
  • NCUM VSDB Input Production
  • NCUM IMD MFI Input Production
  • NCUM Global Post Production
  • NCUM INDIA GNC (Grads NetCdf)
  • NCUM HYSPLIT Input Production
  • UM IMDAA Reanalysis Post Production

Regards,

Arulalan Thanigachalam

ncum post operational v2.0.6

NCMRWF's in-house development pleased to release UMRider's next operational release v2.0.6 by focusing on NCUM Global, Regional post-production immediately after creation of model pp/ff output files, NCUM-EPS-POST and NCUM-EPS-TIGGE-TEST mode after making pass by tigge_check tool.

what is new ?

• Bugs fixed in tigge and eps, regional production.

• NCUM EPS 6-hourly post-production immediately after creation of model pp/ff output files

• NCUM-EPS-TIGGE-TEST mode has been completed after making pass by tigge_check tool of each and every grib2 files and communicated with TIGGE team for testing our data

• checkout the changlogs and milestone of v2.0.6

v2.0.6 supports

• In this version v2.0.6 (since v1.0.2) user will be able to control the following 40 arguments by exporting setup.cfg file into their environment variable called UMRIDER_SETUP. New arguments in this release are highlighted with bold.
  • UMtype
  • UMReanalysis
  • UMInAnlFiles
  • UMInShortFcstFiles
  • UMInLongFcstFiles
  • inPath
  • outPath
  • tmpPath
  • anl_step_hour
  • anl_aavars_reference_time
  • anl_aavars_time_bounds
  • fcst_step_hour
  • start_long_fcst_hour
  • end_long_fcst_hours_at_00z
  • end_long_fcst_hours_at_12z
  • latitude
  • longitude
  • targetGridResolution
  • targetGridFile
  • extraPolateMethod
  • pressureLevels
  • fillFullyMaskedVars
  • soilFirstSecondFixedSurfaceUnit
  • startdate
  • enddate
  • loadg2utils
  • overwriteFiles
  • anlOutGrib2FilesNameStructure
  • fcstOutGrib2FilesNameStructure
  • createGrib2CtlIdxFiles
  • convertGrib2FilestoGrib1Files
  • grib1FilesNameSuffix
  • removeGrib2FilesAfterGrib1FilesCreated
  • createGrib1CtlIdxFiles
  • debug
  • setGrib2TableParameters
  • wgrib2Arguments
  • write2NetcdfFile
  • callBackScript
  • convertVarIdx
• Also in this version v2.0.6 (since v1.0.2) user will be able to control the variables by exporting vars.cfg file into their environment variable called UMRIDER_VARS . User defined variables and ordered will be retained in the out grib2 files (but pressure level variables comes first and followed by non-pressure level variables)
• User will be able to control would they like to get 1-hourly or 3-hourly or 6-hourly or 24-hourly analysis and/or forecast files. (Note that NCUM model produces every 3-hourly instantaneous/ average/ accumulated data. Depends upon user choice it will be instantaneous or accumulated or averaged properly). Not suitable for IMDAA Reanalysis.
• This v2.0.6 supports for
  • NCUM EPS TIGGE Production (TIGGE TEST mode)
  • NCUM EPS Average for VSDB Input Production
  • NCUM EPS Global Post Production
  • NCUM Tropical Cyclone Tracker input Production
  • NCUM Regional Model Wind Energy Input Production
  • NCUM Global Solar Energy Input Production
  • NCUM Global Post Production
  • NCUM Indian Region Post Production
  • NCUM Global OSF Model Input Production
  • NCUM Global HYCOM Model Input Production
  • NCUM Global Solar Wind Energy Input Production
  • NCUM VSDB Input Production
  • NCUM IMD MFI Input Production
  • NCUM Global Post Production
  • NCUM INDIA GNC (Grads NetCdf)
  • NCUM HYSPLIT Input Production
  • UM IMDAA Reanalysis Post Production

Regards,

Arulalan Thanigachalam

ncum post operational v2.0.5

NCMRWF's in-house development pleased to release UMRider's next operational release v2.0.5 by focusing on NCUM Global, Regional post-production immediately after creation of model pp/ff output files, NCUM-EPS-POST and NCUM-EPS-TIGGE-TEST mode after making pass by tigge_check tool.

what is new ?

• Bugs fixed in tigge and eps, regional production.

• NCUM EPS 6-hourly post-production immediately after creation of model pp/ff output files

• NCUM-EPS-TIGGE-TEST mode has been completed after making pass by tigge_check tool of each and every grib2 files and communicated with TIGGE team for testing our data

• checkout the changlogs and milestone of v2.0.4

v2.0.5 supports

• In this version v2.0.5 (since v1.0.2) user will be able to control the following 40 arguments by exporting setup.cfg file into their environment variable called UMRIDER_SETUP. New arguments in this release are highlighted with bold.
  • UMtype
  • UMReanalysis
  • UMInAnlFiles
  • UMInShortFcstFiles
  • UMInLongFcstFiles
  • inPath
  • outPath
  • tmpPath
  • anl_step_hour
  • anl_aavars_reference_time
  • anl_aavars_time_bounds
  • fcst_step_hour
  • start_long_fcst_hour
  • end_long_fcst_hours_at_00z
  • end_long_fcst_hours_at_12z
  • latitude
  • longitude
  • targetGridResolution
  • targetGridFile
  • extraPolateMethod
  • pressureLevels
  • fillFullyMaskedVars
  • soilFirstSecondFixedSurfaceUnit
  • startdate
  • enddate
  • loadg2utils
  • overwriteFiles
  • anlOutGrib2FilesNameStructure
  • fcstOutGrib2FilesNameStructure
  • createGrib2CtlIdxFiles
  • convertGrib2FilestoGrib1Files
  • grib1FilesNameSuffix
  • removeGrib2FilesAfterGrib1FilesCreated
  • createGrib1CtlIdxFiles
  • debug
  • setGrib2TableParameters
  • wgrib2Arguments
  • write2NetcdfFile
  • callBackScript
  • convertVarIdx
• Also in this version v2.0.5 (since v1.0.2) user will be able to control the variables by exporting vars.cfg file into their environment variable called UMRIDER_VARS . User defined variables and ordered will be retained in the out grib2 files (but pressure level variables comes first and followed by non-pressure level variables)
• User will be able to control would they like to get 1-hourly or 3-hourly or 6-hourly or 24-hourly analysis and/or forecast files. (Note that NCUM model produces every 3-hourly instantaneous/ average/ accumulated data. Depends upon user choice it will be instantaneous or accumulated or averaged properly). Not suitable for IMDAA Reanalysis.
• This v2.0.5 supports for
  • NCUM EPS TIGGE Production (TIGGE TEST mode)
  • NCUM EPS Average for VSDB Input Production
  • NCUM EPS Global Post Production
  • NCUM Tropical Cyclone Tracker input Production
  • NCUM Regional Model Wind Energy Input Production
  • NCUM Global Solar Energy Input Production
  • NCUM Global Post Production
  • NCUM Indian Region Post Production
  • NCUM Global OSF Model Input Production
  • NCUM Global HYCOM Model Input Production
  • NCUM VSDB Input Production
  • NCUM IMD MFI Input Production
  • NCUM Global Post Production
  • NCUM INDIA GNC (Grads NetCdf)
  • NCUM HYSPLIT Input Production
  • UM IMDAA Reanalysis Post Production

Regards,

Arulalan Thanigachalam

ncum post operational v2.0.4

NCMRWF's in-house development pleased to release UMRider's next operational release v2.0.4 by focusing on NCUM Global, Regional post-production immediately after creation of model pp/ff output files, HYSPLIT Model input support and NCUM-EPS-TIGGE-TEST mode after making pass by tigge_check tool.

what is new ?

• Bugs fixed in tigge and imdaa production.

• NCUM-HYSPLIT Model Input Grib1 creation setup

• NCUM Global, Regional post-production immediately after creation of model pp/ff output files

• NCUM-EPS-TIGGE-TEST mode has been completed after making pass by tigge_check tool of each and every grib2 files and communicated with TIGGE team for testing our data

• convertVarIdx option - user can pass convertVarIdx via bsub to accept one var per node. currently configured only for tigge-eps.

• checkout the changlogs and milestone of v2.0.4

v2.0.4 supports

• In this version v2.0.4 (since v1.0.2) user will be able to control the following 40 arguments by exporting setup.cfg file into their environment variable called UMRIDER_SETUP. New arguments in this release are highlighted with bold.
  • UMtype
  • UMReanalysis
  • UMInAnlFiles
  • UMInShortFcstFiles
  • UMInLongFcstFiles
  • inPath
  • outPath
  • tmpPath
  • anl_step_hour
  • anl_aavars_reference_time
  • anl_aavars_time_bounds
  • fcst_step_hour
  • start_long_fcst_hour
  • end_long_fcst_hours_at_00z
  • end_long_fcst_hours_at_12z
  • latitude
  • longitude
  • targetGridResolution
  • targetGridFile
  • extraPolateMethod
  • pressureLevels
  • fillFullyMaskedVars
  • soilFirstSecondFixedSurfaceUnit
  • startdate
  • enddate
  • loadg2utils
  • overwriteFiles
  • anlOutGrib2FilesNameStructure
  • fcstOutGrib2FilesNameStructure
  • createGrib2CtlIdxFiles
  • convertGrib2FilestoGrib1Files
  • grib1FilesNameSuffix
  • removeGrib2FilesAfterGrib1FilesCreated
  • createGrib1CtlIdxFiles
  • debug
  • setGrib2TableParameters
  • wgrib2Arguments
  • write2NetcdfFile
  • callBackScript
  • convertVarIdx
• Also in this version v2.0.4 (since v1.0.2) user will be able to control the variables by exporting vars.cfg file into their environment variable called UMRIDER_VARS . User defined variables and ordered will be retained in the out grib2 files (but pressure level variables comes first and followed by non-pressure level variables)
• User will be able to control would they like to get 1-hourly or 3-hourly or 6-hourly or 24-hourly analysis and/or forecast files. (Note that NCUM model produces every 3-hourly instantaneous/ average/ accumulated data. Depends upon user choice it will be instantaneous or accumulated or averaged properly). Not suitable for IMDAA Reanalysis.
• This v2.0.4 supports for
  • NCUM EPS Average for VSDB Input Production
  • NCUM EPS Global Post Production
  • NCUM Tropical Cyclone Tracker input Production
  • NCUM Regional Model Wind Energy Input Production
  • NCUM Global Solar Energy Input Production
  • NCUM Global Post Production
  • NCUM Indian Region Post Production
  • NCUM Global OSF Model Input Production
  • NCUM Global HYCOM Model Input Production
  • NCUM VSDB Input Production
  • NCUM IMD MFI Input Production
  • NCUM Global Post Production
  • NCUM INDIA GNC (Grads NetCdf)
  • NCUM HYSPLIT Input Production
  • UM IMDAA Reanalysis Post Production

Regards,

Arulalan Thanigachalam

ncum post operational v2.0.3

NCMRWF's in-house development pleased to release UMRider's next operational release v2.0.3 by focusing on NCUM Global, Regional post-production immediately after creation of model pp/ff output files and NCUM-EPS-TIGGE-TEST mode.

what is new ?

• Bugs fixed in Soil Variables mask, surface upward solar flux variables

• NCUM Global, Regional post-production immediately after creation of model pp/ff output files

• NCUM-EPS-TIGGE-TEST mode has been completed and communicated with TIGGE team for testing our data

• convertVarIdx option - user can pass convertVarIdx via bsub to accept one var per node. currently configured only for tigge-eps.

• checkout the changlogs and milestone of v2.0.3

v2.0.3 supports

• In this version v2.0.3 (since v1.0.2) user will be able to control the following 39 arguments by exporting setup.cfg file into their environment variable called UMRIDER_SETUP. New arguments in this release are highlighted with bold.
  • UMtype
  • UMReanalysis
  • UMInAnlFiles
  • UMInShortFcstFiles
  • UMInLongFcstFiles
  • inPath
  • outPath
  • tmpPath
  • anl_step_hour
  • anl_aavars_reference_time
  • anl_aavars_time_bounds
  • fcst_step_hour
  • start_long_fcst_hour
  • end_long_fcst_hours_at_00z
  • end_long_fcst_hours_at_12z
  • latitude
  • longitude
  • targetGridResolution
  • targetGridFile
  • extraPolateMethod
  • pressureLevels
  • fillFullyMaskedVars
  • soilFirstSecondFixedSurfaceUnit
  • startdate
  • enddate
  • loadg2utils
  • overwriteFiles
  • anlOutGrib2FilesNameStructure
  • fcstOutGrib2FilesNameStructure
  • createGrib2CtlIdxFiles
  • convertGrib2FilestoGrib1Files
  • grib1FilesNameSuffix
  • removeGrib2FilesAfterGrib1FilesCreated
  • createGrib1CtlIdxFiles
  • debug
  • setGrib2TableParameters
  • wgrib2Arguments
  • write2NetcdfFile
  • callBackScript
  • convertVarIdx
• Also in this version v2.0.3 (since v1.0.2) user will be able to control the variables by exporting vars.cfg file into their environment variable called UMRIDER_VARS . User defined variables and ordered will be retained in the out grib2 files (but pressure level variables comes first and followed by non-pressure level variables)
• User will be able to control would they like to get 1-hourly or 3-hourly or 6-hourly or 24-hourly analysis and/or forecast files. (Note that NCUM model produces every 3-hourly instantaneous/ average/ accumulated data. Depends upon user choice it will be instantaneous or accumulated or averaged properly). Not suitable for IMDAA Reanalysis.
• This v2.0.3 supports for
  • NCUM EPS Average for VSDB Input Production
  • NCUM EPS Global Post Production
  • NCUM Tropical Cyclone Tracker input Production
  • NCUM Regional Model Wind Energy Input Production
  • NCUM Global Solar Energy Input Production
  • NCUM Global Post Production
  • NCUM Indian Region Post Production
  • NCUM Global OSF Model Input Production
  • NCUM Global HYCOM Model Input Production
  • NCUM VSDB Input Production
  • NCUM IMD MFI Input Production
  • NCUM Global Post Production
  • NCUM INDIA GNC (Grads NetCdf)
  • UM IMDAA Reanalysis Post Production

Regards,

Arulalan Thanigachalam

ncum post operational v2.0.2

NCMRWF's in-house development pleased to release UMRider's next operational release v2.0.2 by focusing on NCUM version 10.2 (Regional) and UM IMDAA Reanalysis post processing.

what is new ?

• Bugs fix for IMDAA
• Added precipitation_amount, startiform_rainfall, startiform_snowfall in NCUM_REGIONAL_MODEL post process (accumulated over every 1 hour from model ouputs of 15 minutes interval)
• Included Orography variable in NCUM Global Analysis at 00, 06, 12, 18 UTC (not only 00 UTC).
• checkout the changlogs and milestone of v2.0.2

v2.0.2 supports

• In this version v2.0.2 (since v1.0.2) user will be able to control the following 39 arguments by exporting setup.cfg file into their environment variable called UMRIDER_SETUP. New arguments in this release are highlighted with bold.
  • UMtype
  • UMReanalysis
  • UMInAnlFiles
  • UMInShortFcstFiles
  • UMInLongFcstFiles
  • inPath
  • outPath
  • tmpPath
  • anl_step_hour
  • anl_aavars_reference_time
  • anl_aavars_time_bounds
  • fcst_step_hour
  • start_long_fcst_hour
  • end_long_fcst_hours_at_00z
  • end_long_fcst_hours_at_12z
  • latitude
  • longitude
  • targetGridResolution
  • targetGridFile
  • extraPolateMethod
  • pressureLevels
  • fillFullyMaskedVars
  • soilFirstSecondFixedSurfaceUnit
  • startdate
  • enddate
  • loadg2utils
  • overwriteFiles
  • anlOutGrib2FilesNameStructure
  • fcstOutGrib2FilesNameStructure
  • createGrib2CtlIdxFiles
  • convertGrib2FilestoGrib1Files
  • grib1FilesNameSuffix
  • removeGrib2FilesAfterGrib1FilesCreated
  • createGrib1CtlIdxFiles
  • debug
  • setGrib2TableParameters
  • wgrib2Arguments
  • write2NetcdfFile
  • callBackScript
• Also in this version v2.0.2 (since v1.0.2) user will be able to control the variables by exporting vars.cfg file into their environment variable called UMRIDER_VARS . User defined variables and ordered will be retained in the out grib2 files (but pressure level variables comes first and followed by non-pressure level variables)
• User will be able to control would they like to get 1-hourly or 3-hourly or 6-hourly or 24-hourly analysis and/or forecast files. (Note that NCUM model produces every 3-hourly instantaneous/ average/ accumulated data. Depends upon user choice it will be instantaneous or accumulated or averaged properly). Not suitable for IMDAA Reanalysis.
• This v2.0.2 supports for
  • NCUM EPS Average for VSDB Input Production
  • NCUM EPS Global Post Production
  • NCUM Tropical Cyclone Tracker input Production
  • NCUM Regional Model Wind Energy Input Production
  • NCUM Global Solar Energy Input Production
  • NCUM Global Post Production
  • NCUM Indian Region Post Production
  • NCUM Global OSF Model Input Production
  • NCUM Global HYCOM Model Input Production
  • NCUM VSDB Input Production
  • NCUM IMD MFI Input Production
  • NCUM Global Post Production
  • NCUM INDIA GNC (Grads NetCdf)
  • UM IMDAA Reanalysis Post Production

Regards,

Arulalan.T

ncum post operational v2.0.1

NCMRWF's in-house development pleased to release UMRider's next operational release v2.0.1 by focusing on NCUM version 10.2 (Regional) and UM IMDAA Reanalysis post processing.

what is new ?

• Bugs fix
• checkout the changlogs and milestone of v2.0.1
• This v2.0.1 mainly target the following post productions along with the existing v2.0.0 supports
  • NCUM Regional 4km model post processing
  • UM IMDAA Regional 12km model post processing
  • NCUM INDIA GNC (Grads NetCdf) post processing

v2.0.1 supports

• In this version v2.0.1 (since v1.0.2) user will be able to control the following 39 arguments by exporting setup.cfg file into their environment variable called UMRIDER_SETUP. New arguments in this release are highlighted with bold.
  • UMtype
  • UMReanalysis
  • UMInAnlFiles
  • UMInShortFcstFiles
  • UMInLongFcstFiles
  • inPath
  • outPath
  • tmpPath
  • anl_step_hour
  • anl_aavars_reference_time
  • anl_aavars_time_bounds
  • fcst_step_hour
  • start_long_fcst_hour
  • end_long_fcst_hours_at_00z
  • end_long_fcst_hours_at_12z
  • latitude
  • longitude
  • targetGridResolution
  • targetGridFile
  • extraPolateMethod
  • pressureLevels
  • fillFullyMaskedVars
  • soilFirstSecondFixedSurfaceUnit
  • startdate
  • enddate
  • loadg2utils
  • overwriteFiles
  • anlOutGrib2FilesNameStructure
  • fcstOutGrib2FilesNameStructure
  • createGrib2CtlIdxFiles
  • convertGrib2FilestoGrib1Files
  • grib1FilesNameSuffix
  • removeGrib2FilesAfterGrib1FilesCreated
  • createGrib1CtlIdxFiles
  • debug
  • setGrib2TableParameters
  • wgrib2Arguments
  • write2NetcdfFile
  • callBackScript
• Also in this version v2.0.1 (since v1.0.2) user will be able to control the variables by exporting vars.cfg file into their environment variable called UMRIDER_VARS . User defined variables and ordered will be retained in the out grib2 files (but pressure level variables comes first and followed by non-pressure level variables)
• User will be able to control would they like to get 1-hourly or 3-hourly or 6-hourly or 24-hourly analysis and/or forecast files. (Note that NCUM model produces every 3-hourly instantaneous/ average/ accumulated data. Depends upon user choice it will be instantaneous or accumulated or averaged properly). Not suitable for IMDAA Reanalysis.
• This v2.0.1 supports for
  • NCUM EPS Average for VSDB Input Production
  • NCUM EPS Global Post Production
  • NCUM Tropical Cyclone Tracker input Production
  • NCUM Regional Model Wind Energy Input Production
  • NCUM Global Solar Energy Input Production
  • NCUM Global Post Production
  • NCUM Indian Region Post Production
  • NCUM Global OSF Model Input Production
  • NCUM Global HYCOM Model Input Production
  • NCUM VSDB Input Production
  • NCUM IMD MFI Input Production
  • NCUM Global Post Production
  • NCUM INDIA GNC (Grads NetCdf)
  • UM IMDAA Reanalysis Post Production

Regards,

Arulalan.T

ncum post operational v2.0.0

NCMRWF's in-house development pleased to release UMRider's next operational release v2.0.0 by focusing on NCUM version 10.2 (Global & Regional).

what is new ?

• Bugs fix
• checkout the changlogs and milestone of v2.0.0
• This v2.0.0 mainly target the following post productions along with the existing v1.0.2.1 supports
  • NCUM EPS 6-, 24- hourly conversion happens immediately when the model output files are being generated

v2.0.0 supports

• In this version v2.0.0 (since v1.0.2) user will be able to control the following 37 arguments by exporting setup.cfg file into their environment variable called UMRIDER_SETUP. New arguments in this release are highlighted with bold.
  • UMtype
  • UMInAnlFiles
  • UMInShortFcstFiles
  • UMInLongFcstFiles,
  • inPath
  • outPath
  • tmpPath
  • anl_step_hour
  • anl_aavars_reference_time
  • anl_aavars_time_bounds
  • fcst_step_hour
  • start_long_fcst_hour
  • end_long_fcst_hours_at_00z
  • end_long_fcst_hours_at_12z
  • latitude
  • longitude
  • targetGridResolution
  • targetGridFile
  • extraPolateMethod
  • pressureLevels
  • fillFullyMaskedVars
  • soilFirstSecondFixedSurfaceUnit
  • startdate
  • enddate
  • loadg2utils
  • overwriteFiles
  • anlOutGrib2FilesNameStructure
  • fcstOutGrib2FilesNameStructure
  • createGrib2CtlIdxFiles
  • convertGrib2FilestoGrib1Files
  • grib1FilesNameSuffix
  • removeGrib2FilesAfterGrib1FilesCreated
  • createGrib1CtlIdxFiles
  • debug
  • setGrib2TableParameters
  • wgrib2Arguments
  • callBackScript
• Also in this version v2.0.0 (since v1.0.2) user will be able to control the variables by exporting vars.cfg file into their environment variable called UMRIDER_VARS . User defined variables and ordered will be retained in the out grib2 files (but pressure level variables comes first and followed by non-pressure level variables)
• User will be able to control would they like to get 1-hourly or 3-hourly or 6-hourly or 24-hourly analysis and/or forecast files. (Note that NCUM model produces every 3-hourly instantaneous/ average/ accumulated data. Depends upon user choice it will be instantaneous or accumulated or averaged properly)
• This v2.0.0 supports for
  • NCUM EPS Average for VSDB Input Production
  • NCUM EPS Global Post Production
  • NCUM Tropical Cyclone Tracker input Production
  • NCUM Regional Model Wind Energy Input Production
  • NCUM Global Solar Energy Input Production
  • NCUM Global Post Production
  • NCUM Indian Region Post Production
  • NCUM Global OSF Model Input Production
  • NCUM Global HYCOM Model Input Production
  • NCUM VSDB Input Production
  • NCUM IMD MFI Input Production

Regards,

Arulalan.T

ncum post operational v1.0.2.1

NCMRWF's in-house development pleased to release UMRider's next operational release v1.0.2.1 by focusing on NCUM ensembles post production and NCUM ensembles average for VSDB Input.

what is new ?

• Bugs fix
• checkout the changlogs and milestone of v1.0.2
• This v1.0.2.1 mainly target the following post productions along with the existing v1.0.2 supports
  • NCUM EPS Average for VSDB Input Production

v1.0.2 supports

• In this version v1.0.2 user will be able to control the following 37 arguments by exporting setup.cfg file into their environment variable called UMRIDER_SETUP. New arguments in this release are highlighted with bold.
  • UMtype
  • UMInAnlFiles
  • UMInShortFcstFiles
  • UMInLongFcstFiles,
  • inPath
  • outPath
  • tmpPath
  • anl_step_hour
  • anl_aavars_reference_time
  • anl_aavars_time_bounds
  • fcst_step_hour
  • start_long_fcst_hour
  • end_long_fcst_hours_at_00z
  • end_long_fcst_hours_at_12z
  • latitude
  • longitude
  • targetGridResolution
  • targetGridFile
  • extraPolateMethod
  • pressureLevels
  • fillFullyMaskedVars
  • soilFirstSecondFixedSurfaceUnit
  • startdate
  • enddate
  • loadg2utils
  • overwriteFiles
  • anlOutGrib2FilesNameStructure
  • fcstOutGrib2FilesNameStructure
  • createGrib2CtlIdxFiles
  • convertGrib2FilestoGrib1Files
  • grib1FilesNameSuffix
  • removeGrib2FilesAfterGrib1FilesCreated
  • createGrib1CtlIdxFiles
  • debug
  • setGrib2TableParameters
  • wgrib2Arguments
  • callBackScript
• Also in this version v1.0.2 user will be able to control the variables by exporting vars.cfg file into their environment variable called UMRIDER_VARS . User defined variables and ordered will be retained in the out grib2 files (but pressure level variables comes first and followed by non-pressure level variables)
• User will be able to control would they like to get 1-hourly or 3-hourly or 6-hourly or 24-hourly analysis and/or forecast files. (Note that NCUM model produces every 3-hourly instantaneous/ average/ accumulated data. Depends upon user choice it will be instantaneous or accumulated or averaged properly)
• This v1.0.2.1 supports for
  • **NCUM EPS Average for VSDB Input Production
  • NCUM EPS Global Post Production
  • NCUM Tropical Cyclone Tracker input Production
  • NCUM Regional Model Wind Energy Input Production
  • NCUM Global Solar Energy Input Production
  • NCUM Global Post Production
  • NCUM Indian Region Post Production
  • NCUM Global OSF Model Input Production
  • NCUM Global HYCOM Model Input Production
  • NCUM VSDB Input Production
  • NCUM IMD MFI Input Production

Regards,

Arulalan.T

ncum post operational v1.0.2

NCMRWF's in-house development pleased to release UMRider's next operational release v1.0.2 by focusing on NCUM ensembles post production along with other few new support.

what is new ?

• Bugs fix
• 12 extra user arguments features
• New extra vars
• checkout the changlogs and milestone of v1.0.2
• This v1.0.2 mainly target the following post productions along with the existing v1.0.1 supports
  • NCUM EPS Global Post Production
  • NCUM Tropical Cyclone Tracker input Production
  • NCUM Regional Model Wind Energy Input Production
  • NCUM Global Solar Energy Input Production
• Existing v1.0.1 supports
  • NCUM Indian Region Post Production
  • NCUM Global OSF Model Input Production
  • NCUM Global HYCOM Model Input Production
  • NCUM VSDB Input Production
  • NCUM IMD MFI Input Production

v1.0.2 supports

• In this version v1.0.2 user will be able to control the following 37 arguments by exporting setup.cfg file into their environment variable called UMRIDER_SETUP. New arguments in this release are highlighted with bold.
  • UMtype
  • UMInAnlFiles
  • UMInShortFcstFiles
  • UMInLongFcstFiles,
  • inPath
  • outPath
  • tmpPath
  • anl_step_hour
  • anl_aavars_reference_time
  • anl_aavars_time_bounds
  • fcst_step_hour
  • start_long_fcst_hour
  • end_long_fcst_hours_at_00z
  • end_long_fcst_hours_at_12z
  • latitude
  • longitude
  • targetGridResolution
  • targetGridFile
  • extraPolateMethod
  • pressureLevels
  • fillFullyMaskedVars
  • soilFirstSecondFixedSurfaceUnit
  • startdate
  • enddate
  • loadg2utils
  • overwriteFiles
  • anlOutGrib2FilesNameStructure
  • fcstOutGrib2FilesNameStructure
  • createGrib2CtlIdxFiles
  • convertGrib2FilestoGrib1Files
  • grib1FilesNameSuffix
  • removeGrib2FilesAfterGrib1FilesCreated
  • createGrib1CtlIdxFiles
  • debug
  • setGrib2TableParameters
  • wgrib2Arguments
  • callBackScript
• Also in this version v1.0.2 user will be able to control the variables by exporting vars.cfg file into their environment variable called UMRIDER_VARS . User defined variables and ordered will be retained in the out grib2 files (but pressure level variables comes first and followed by non-pressure level variables)
• User will be able to control would they like to get 1-hourly or 3-hourly or 6-hourly or 24-hourly analysis and/or forecast files. (Note that NCUM model produces every 3-hourly instantaneous/ average/ accumulated data. Depends upon user choice it will be instantaneous or accumulated or averaged properly)
• This v1.0.2 supports for
  • NCUM EPS Global Post Production
  • NCUM Tropical Cyclone Tracker input Production
  • NCUM Regional Model Wind Energy Input Production
  • NCUM Global Solar Energy Input Production
  • NCUM Global Post Production
  • NCUM Indian Region Post Production
  • NCUM Global OSF Model Input Production
  • NCUM Global HYCOM Model Input Production
  • NCUM VSDB Input Production
  • NCUM IMD MFI Input Production

Regards,

Arulalan.T