Doc update for Orin Nano BOM #618
Conversation
| @@ -0,0 +1,74 @@ | |||
| # Bill of Materials - Jetson Orin Nano version | |||
|
|
|||
| This page lists all the parts you need to build the open-source JetBot with the new [**Jetson Orin Nano 8GB Developer Kit**](https://developer.nvidia.com/embedded/learn/get-started-jetson-orin-nano-devkit), along with purchasing links from popular vendors. | |||
There was a problem hiding this comment.
Maybe add a note here about when to use Jetson Orin Nano, and about Jetson Nano EOL
docs/bill_of_materials_orin.md
Outdated
| | Jetson Orin Nano 8GB Developer Kit | 1 | $499.00 | [NVIDIA](https://store.nvidia.com/jetson/store/) | | | ||
| | Micro SD card | 1 | $14.95 | [Amazon](https://a.co/d/0aOqPQh) | 128GB | | ||
| | Battery | 1 | $12.99 | [Amazon](https://a.co/d/5DvsXGu) | PD 20W output, 10,000mAh | | ||
| | USB-C PD cable | 1 | $10.99 | [Amazon](https://a.co/d/ihjA431) | USB-C to DC 5.5mm x 2.5mm, right angle | |
There was a problem hiding this comment.
Not an issue, but do they have a smaller version of this cable?
There was a problem hiding this comment.
I have searched around and evaluated alternatives (such as shown in the photo below), but did not have a good minimum version of the cable.
I will test to see if I can cut and solder them internal cables to effectively shorten the cable, and if that is the case I will document for those people prefer the nice tight cable management.
There was a problem hiding this comment.
I think it's alright, was just wondering. Soldering the internal cables is probably too much to ask developers.
Document updated.
Staged: https://tokk-nv.github.io/jetbot/master/bill_of_materials_orin.html