Skip to content

Android library for measuring time between multiple independent events.

License

Notifications You must be signed in to change notification settings

NikitaKozlov/Pury

Repository files navigation

Build Status codecov Gitter

Pury

Pury is a profiling library for measuring time between multiple independent events. Events can be triggered with one of the annotations or with a method call. All events for a single scenario are united into one report.

If you are interesting in motivation behind this library and it's inner structure, please, check this article.

Output for launching an example app:

App Start --> 0ms
  Splash Screen --> 5ms
    Splash Load Data --> 37ms
    Splash Load Data <-- 1042ms, execution = 1005ms
  Splash Screen <-- 1042ms, execution = 1037ms
  Main Activity Launch --> 1043ms 
    onCreate() --> 1077ms 
    onCreate() <-- 1100ms, execution = 23ms
    onStart() --> 1101ms 
    onStart() <-- 1131ms, execution = 30ms
  Main Activity Launch <-- 1182ms, execution = 139ms
App Start <-- 1182ms

As you can see, Pury measured time for launching the application, including intermediate stages, like loading data on splash screen and activity’s lifecycle methods. For each stage start and stop timestamps are displayed and so as execution time.

Output for a screen with pagination:

Get Next Page --> 0ms
  Load --> avg = 1.80ms, min = 1ms, max = 3ms, for 5 runs
  Load <-- avg = 258.40ms, min = 244ms, max = 278ms, for 5 runs
  Process --> avg = 261.00ms, min = 245ms, max = 280ms, for 5 runs
  Process <-- avg = 114.20ms, min = 99ms, max = 129ms, for 5 runs
Get Next Page <-- avg = 378.80ms, min = 353ms, max = 411ms, for 5 runs

In this example, you can see some statistical information that was collected during 5 runs. For each stage start timestamp and execution time are displayed.

How to profile with Pury?

There are three basic annotations:

  1. @StartProfiling — triggers an event to start Stage or Run. Profiling will start before method execution.

    @StartProfiling(profilerName = "List pagination", runsCounter = 3, stageName = "Loading", 
    stageOrder = 0)
    private void loadNextPage() { }
    

    It can accept up to 5 arguments:

    1. profilerName — name of the profiler is displayed in the result. Along with runsCounter identifies the Profiler.
    2. runsCounter — amount of runs for Profiler to wait for. Result is available only after all runs are stopped.
    3. stageName — identifies a stage to start. Name is displayed in the result.
    4. stageOrder — stage order reflects the hierarchy of stages. In order to start a new stage, it must be bigger then order of current most nested active stage. Stage order is a subject to one more limitation: first start event must have order number equal zero.
    5. enabled — if set to false, an annotation is skipped.

    Profiler is identified by combination of profilerName and runsCounter. So if you are using same profilerName, but different runsCounter, then you will get two separate results, instead of a combined one.

  2. @StopProfiling — triggers an event to stop Stage or Run. Profiling will be stopped after method execution. Once Stage or Run is stopped, all nested stages are also stopped.

    @StopProfiling(profilerName = "List pagination", runsCounter = 3, stageName = "Loading")
    private void displayNextPage() { }
    

    It has the same arguments as @StartProfiling, except stageOrder.

  3. @MethodProfiling — combination of StartProfiling and StopProfiling.

    @MethodProfiling(profilerName = "List pagination", runsCounter = 3, stageName = "Process", `
    stageOrder = 1)
    private List<String> processNextPage() { }
    

    It has exact same arguments as StartProfiling with one small remark. If stageName is empty then it will be generated from method’s name and class. This is made in order to be able to use MethodProfiling without any arguments and get a meaningful result.

Since Java 7 doesn’t support repeatable annotations, group annotations for each of annotation above were made:

@StartProfilings(StartProfiling[] value)

@StopProfilings(StopProfiling[] value)

@MethodProfilings(MethodProfiling[] value)

As already mentioned, you can call start or stop profiling with a direct call:

Pury.startProfiling();

Pury.stopProfiling();

Arguments are exactly the same as in corresponding annotations.

Logging Results

By default Pury uses default logger, but it also allows you to set your own one. All you need to do is to implement Logger interface and set it via Pury.setLogger().

public interface Logger {
    void result(String tag, String message);

    void warning(String tag, String message);

    void error(String tag, String message);
}

By default result goes to Log.d, warning to Log.w and error to Log.e.

Plugins

Wiki page for Plugins is in the process of creation

Plugins enable customisation and better control over reporting profiling results. They provides access to raw results to process them in the most suitable way. If you are interested to read more about them, please check this post

How to start using Pury?

In order to start using Pury, you need to do only two simple steps.

First, apply AspectJ weaving plugin, there are more then one such a plugin out there. Pury inside uses WeaverLite plugin. So you can use it as well.

Second, include following dependencies:

dependencies {
   compile 'com.nikitakozlov.pury:annotations:1.0.1'
   debugCompile 'com.nikitakozlov.pury:pury:1.1.0'
   releaseCompile 'com.nikitakozlov.pury:pury-no-op:1.1.0'
}

If you want to profile on release, then use compile instead of compileDebug for a second dependency and removed third.

License

The MIT License (MIT)

Copyright (c) 2016 Nikita Kozlov

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

About

Android library for measuring time between multiple independent events.

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages