Skip to content

Testing

Jump to bottom
Ryan Thompson edited this page Nov 30, 2023 · 1 revision

This page is a collection of thoughts for required testing prior to cutting a release.

Table of Contents

Library testing

Run the libbladeRF regression test. 

cmake .. -DTEST_REGRESSION=TRUE
make -j`nproc` && sudo make install
make test_libbladeRF

FPGA testing

Run the HDL regression test. Please run the synthesis regression test if submitting PRs. 

cmake .. -DTEST_REGRESSION=TRUE
make -j`nproc` && sudo make install
make test_hdl
make test_synthesis # Only necessary for submitting HDL related PRs

Release Testing

Run the an all inclusive test. Note that this will take a while to run as it tests libbladeRF, HDL test benches, and HDL synthesis across bladeRF devices. 

cmake .. -DTEST_REGRESSION=TRUE
make -j`nproc` && sudo make install
make test_all

FX3 firmware

  • Verify flashing with bladeRF-flash works on Windows, Linux, and OS X on USB 2.0 and USB 3.0
    • Test both RAM-only path and flash paths. This exercises recover, erase, reset, flash_firmware driver operations.
  • Run both USB20CV and USB30CV in compliance testing mode to ensure there are no regressions
  • Verify booting the FPGA via USB on Windows, Linux, and OS X on USB 2.0 and USB 3.0
Clone this wiki locally