Use default solver for testing models #938

bclement-ocp · 2023-11-16T11:59:36Z

Prior to c1e4387 (#829) we did not have model generation in the default solver, and model generation required to use the Tableaux solver, so we used the Tableaux solver when testing models.

Since the default solver now supports model generation, we should use it to test model generation instead, since the models generated by both solvers can be different and most users will use the default solver rather than the Tableaux solver.

Unfortunately, this causes some tests using get-assignment to fail (see #937).

Prior to c1e4387 (OCamlPro#829) we did not have model generation in the default solver, and model generation required to use the Tableaux solver, so we used the Tableaux solver when testing models. Since the default solver now supports model generation, we should use it to test model generation instead, since the models generated by both solvers can be different and most users will use the default solver rather than the Tableaux solver. Unfortunately, this causes some tests using `get-assignment` to fail (see OCamlPro#937).

CHANGES: ### Command-line interface - Enable FPA theory by default (OCamlPro/alt-ergo#1177) - Remove deprecated output channels (OCamlPro/alt-ergo#782) - Deprecate the --use-underscore since it produces models that are not SMT-LIB compliant (OCamlPro/alt-ergo#805) - Add --dump-models-on to dump models on a specific output channel (OCamlPro/alt-ergo#838) - Use consistent return codes (OCamlPro/alt-ergo#842) - Add --continue-on-error flag to set the SMT-LIB error behavior (OCamlPro/alt-ergo#853) - Make dolmen the default value for the --frontend option (OCamlPro/alt-ergo#857) - Restore functionality to broken `--profiling` option (OCamlPro/alt-ergo#947) - Add bare-bones support for interactive input in SMT-LIB format (OCamlPro/alt-ergo#949) - Less confusing behavior on timeout (OCamlPro/alt-ergo#982, OCamlPro/alt-ergo#984) - Add `--strict` option for SMT-LIB compliant mode (OCamlPro/alt-ergo#916, OCamlPro/alt-ergo#1133) - Deprecate `sum`, `typing` and `warnings` debug flags (OCamlPro/alt-ergo#1204) ### SMT-LIB support - Add support for the many new SMT-LIB commands (OCamlPro/alt-ergo#837, OCamlPro/alt-ergo#848, OCamlPro/alt-ergo#852, OCamlPro/alt-ergo#863, OCamlPro/alt-ergo#911, OCamlPro/alt-ergo#942, OCamlPro/alt-ergo#945, OCamlPro/alt-ergo#961, OCamlPro/alt-ergo#975, OCamlPro/alt-ergo#1069) - Expose the FPA rounding builtin in the SMT-LIB format (OCamlPro/alt-ergo#876, OCamlPro/alt-ergo#1135) - Allow changing the SAT solver using (set-option) (OCamlPro/alt-ergo#880) - Add support for the `:named` attribute (OCamlPro/alt-ergo#957) - Add support for quoted identifiers (OCamlPro/alt-ergo#909, OCamlPro/alt-ergo#972) - Add support for naming lemmas in SMT-LIB syntax (OCamlPro/alt-ergo#1141, OCamlPro/alt-ergo#1143) ### Model generation - Use post-solve SAT environment in model generation, fixing issues where incorrect models were generated (OCamlPro/alt-ergo#789) - Restore support for records in models (OCamlPro/alt-ergo#793) - Use abstract values instead of dummy values in models where the actual value does not matter (OCamlPro/alt-ergo#804, OCamlPro/alt-ergo#835) - Use fresh names for all abstract values to prevent accidental captures (OCamlPro/alt-ergo#811) - Add support for model generation with the default CDCL solver (OCamlPro/alt-ergo#829) - Support model generation for the BV theory (OCamlPro/alt-ergo#841, OCamlPro/alt-ergo#968) - Add support for optimization (MaxSMT / OptiSMT) with lexicographic Int and Real objectives (OCamlPro/alt-ergo#861, OCamlPro/alt-ergo#921) - Add a SMT-LIB printer for expressions (OCamlPro/alt-ergo#952, OCamlPro/alt-ergo#981, OCamlPro/alt-ergo#1082, OCamlPro/alt-ergo#931, OCamlPro/alt-ergo#932) - Ensure models have a value for all constants in the problem (OCamlPro/alt-ergo#1019) - Fix a rare soundness issue with integer constraints when model generation is enabled (OCamlPro/alt-ergo#1025) - Support model generation for the ADT theory (OCamlPro/alt-ergo#1093, OCamlPro/alt-ergo#1153) ### Theory reasoning - Add word-level propagators for the BV theory (OCamlPro/alt-ergo#944, OCamlPro/alt-ergo#1004, OCamlPro/alt-ergo#1007, OCamlPro/alt-ergo#1010, OCamlPro/alt-ergo#1011, OCamlPro/alt-ergo#1012, OCamlPro/alt-ergo#1040, OCamlPro/alt-ergo#1044, OCamlPro/alt-ergo#1054, OCamlPro/alt-ergo#1055, OCamlPro/alt-ergo#1056, OCamlPro/alt-ergo#1057, OCamlPro/alt-ergo#1065, OCamlPro/alt-ergo#1073, OCamlPro/alt-ergo#1144, OCamlPro/alt-ergo#1152) - Add interval domains and arithmetic propagators for the BV theory (OCamlPro/alt-ergo#1058, OCamlPro/alt-ergo#1083, OCamlPro/alt-ergo#1084, OCamlPro/alt-ergo#1085) - Native support for bv2nat of bit-vector normal forms (OCamlPro/alt-ergo#1154) - Fix incompleteness issues in the BV solver (OCamlPro/alt-ergo#978, OCamlPro/alt-ergo#979) - Abstract more arguments of AC symbols to avoid infinite loops when they contain other AC symbols (OCamlPro/alt-ergo#990) - Do not make irrelevant decisions in CDCL solver, improving performance slightly (OCamlPro/alt-ergo#1041) - Rewrite the ADT theory to use domains and integrate the enum theory into the ADT theory (OCamlPro/alt-ergo#1078, OCamlPro/alt-ergo#1086, OCamlPro/alt-ergo#1087, OCamlPro/alt-ergo#1091, OCamlPro/alt-ergo#1094, OCamlPro/alt-ergo#1138) - Rewrite the Intervals module entirely (OCamlPro/alt-ergo#1108) - Add maximize/minimize terms for matching (OCamlPro/alt-ergo#1166) - Internalize `sign_extend` and `repeat` (OCamlPro/alt-ergo#1192) - Run cross-propagators to completion (OCamlPro/alt-ergo#1221) - Support binary distinct on arbitrary bit-widths (OCamlPro/alt-ergo#1222) - Only perform optimization when building a model (OCamlPro/alt-ergo#1224) - Make sure domains do not overflow the default domain (OCamlPro/alt-ergo#1225) - Do not build unnormalized values in `zero_extend` (OCamlPro/alt-ergo#1226) ### Internal/library changes - Rewrite the Vec module (OCamlPro/alt-ergo#607) - Move printer definitions closer to type definitions (OCamlPro/alt-ergo#808) - Mark proxy names as reserved (OCamlPro/alt-ergo#836) - Use a Zarith-based representation for numbers and bit-vectors (OCamlPro/alt-ergo#850, OCamlPro/alt-ergo#943) - Add native support for (bvnot) in the BV solver (OCamlPro/alt-ergo#856) - Add constant propagators for partially interpreted functions (OCamlPro/alt-ergo#869) - Remove `Util.failwith` in favor of `Fmt.failwith` (OCamlPro/alt-ergo#872) - Add more `Expr` smart constructors (OCamlPro/alt-ergo#877, OCamlPro/alt-ergo#878) - Do not use existential variables for integer division (OCamlPro/alt-ergo#881) - Preserve `Subst` literals to prevent accidental incompleteness (OCamlPro/alt-ergo#886) - Properly start timers (OCamlPro/alt-ergo#924) - Compute a concrete representation of a model instead of performing (OCamlPro/alt-ergo#925) - Allow direct access to the SAT API in the Alt-Ergo library computations during printing (OCamlPro/alt-ergo#927) - Better handling for step limit (OCamlPro/alt-ergo#936) - Add a generic option manager to deal with the dolmen state (OCamlPro/alt-ergo#951) - Expose an imperative SAT API in the Alt-Ergo library (OCamlPro/alt-ergo#962) - Keep track of the SMT-LIB mode (OCamlPro/alt-ergo#971) - Add ability to decide on semantic literals (OCamlPro/alt-ergo#1027, OCamlPro/alt-ergo#1118) - Preserve trigger order when parsing quantifiers with multiple trigger (OCamlPro/alt-ergo#1046). - Store domains inside the union-find module (OCamlPro/alt-ergo#1119) - Remove some polymorphic hashtables (OCamlPro/alt-ergo#1219) ### Build and integration - Drop support for OCaml <4.08.1 (OCamlPro/alt-ergo#803) - Use dune-site for the inequalities plugins. External pluginsm ust now be registered through the dune-site plugin mechanism in the `(alt-ergo plugins)` site to be picked up by Alt-Ergo (OCamlPro/alt-ergo#1049). - Add a release workflow (OCamlPro/alt-ergo#827) - Add a Windows workflow (OCamlPro/alt-ergo#1203) - Mark the dune.inc file as linguist-generated to avoid huge diffs (OCamlPro/alt-ergo#830) - Use GitHub Actions badges in the README (OCamlPro/alt-ergo#882) - Use `dune build @check` to build the project (OCamlPro/alt-ergo#887) - Enable warnings as errors on the CI (OCamlPro/alt-ergo#888) - Uniformization of internal identifiers generation (OCamlPro/alt-ergo#905, OCamlPro/alt-ergo#918) - Use an efficient `String.starts_with` implementation (OCamlPro/alt-ergo#912) - Fix the Makefile (OCamlPro/alt-ergo#914) - Add `Logs` dependency (OCamlPro/alt-ergo#1206) - Use `dynamic_include` to include the generated file `dune.inc` (OCamlPro/alt-ergo#1199) - Support Windows (OCamlPro/alt-ergo#1184,OCamlPro/alt-ergo#1189,OCamlPro/alt-ergo#1195,OCamlPro/alt-ergo#1199,OCamlPro/alt-ergo#1200) - Wrap the library `Alt_ergo_prelude` (OCamlPro/alt-ergo#1223) ### Testing - Use --enable-assertions in tests (OCamlPro/alt-ergo#809) - Add a test for push/pop (OCamlPro/alt-ergo#843) - Use the CDCL solver when testing model generation (OCamlPro/alt-ergo#938) - Do not test .smt2 files with the legacy frontend (OCamlPro/alt-ergo#939) - Restore automatic creation of .expected files (OCamlPro/alt-ergo#941) ### Documentation - Add a new example for model generation (OCamlPro/alt-ergo#826) - Add a Pygments lexer for the Alt-Ergo native language (OCamlPro/alt-ergo#862) - Update the current authors (OCamlPro/alt-ergo#865) - Documentation of the `Enum` theory (OCamlPro/alt-ergo#871) - Document `Th_util.lit_origin` (OCamlPro/alt-ergo#915) - Document the CDCL-Tableaux solver (OCamlPro/alt-ergo#995) - Document Windows support (OCamlPro/alt-ergo#1216) - Remove instructions to install Alt-Ergo on Debian (OCamlPro/alt-ergo#1217) - Document optimization feature (OCamlPro/alt-ergo#1231)

bclement-ocp requested a review from Halbaroth November 16, 2023 11:59

Halbaroth approved these changes Nov 16, 2023

View reviewed changes

bclement-ocp force-pushed the bclement/test-cdcl-models branch from 8049387 to 46b2ecb Compare November 16, 2023 15:06

bclement-ocp enabled auto-merge (squash) November 16, 2023 15:06

bclement-ocp merged commit e96d3d4 into OCamlPro:next Nov 16, 2023
13 checks passed

bclement-ocp deleted the bclement/test-cdcl-models branch January 23, 2024 08:49

bclement-ocp mentioned this pull request Sep 24, 2024

[new release] alt-ergo (4 packages) (2.6.0) ocaml/opam-repository#26609

Merged

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Use default solver for testing models #938

Use default solver for testing models #938

bclement-ocp commented Nov 16, 2023

Use default solver for testing models #938

Use default solver for testing models #938

Conversation

bclement-ocp commented Nov 16, 2023