Properly handle setting the max current by setting in the value in the EVSE EEPROM rather than the WiFi config

platformio.ini

@@ -36,7 +36,7 @@ lib_deps =
   jeremypoulter/ArduinoMongoose@0.0.17
   jeremypoulter/Micro Debug@0.0.5
   jeremypoulter/ConfigJson@0.0.4
-  jeremypoulter/OpenEVSE@0.0.10
+  jeremypoulter/OpenEVSE@0.0.11
   jeremypoulter/ESPAL@0.0.3
   jeremypoulter/StreamSpy@0.0.1
   jeremypoulter/MicroTasks@0.0.2

src/app_config.cpp

@@ -84,8 +84,6 @@ String tesla_vehicle_id;
 uint8_t led_brightness;
 #endif
 
-long max_current_soft;
-
 String esp_hostname_default = "openevse-"+ESPAL.getShortId();
 
 void config_changed(String name);
@@ -156,9 +154,6 @@ ConfigOpt *opts[] =
   new ConfigOptDefenition<uint8_t>(led_brightness, LED_DEFAULT_BRIGHTNESS, "led_brightness", "lb"),
 #endif
 
-// EVSE settings
-  new ConfigOptDefenition<long>(max_current_soft, LONG_MAX, "max_current_soft", "mcs"),
-
 // Flags
   &flagsOpt,
 
@@ -243,8 +238,6 @@ void config_changed(String name)
   } else if(name == "led_brightness") {
     ledManager.setBrightness(led_brightness);
 #endif
-  } else if(name == "max_current_soft") {
-    evse.setMaxConfiguredCurrent(max_current_soft);
   }
 }
 

src/evse_monitor.cpp

@@ -313,12 +313,9 @@ void EvseMonitor::updateCurrentSettings(long min_current, long max_hardware_curr
 {
   DBUGF("min_current = %ld, pilot = %ld, max_configured_current = %ld, max_hardware_current = %ld", min_current, pilot, max_configured_current, max_hardware_current);
   _min_current = min_current;
-  // The max_configured_current is a write once value, so as fare as we are concerned that is the 'hardware' max. We manage the acrual soft limit in the WiFi code.
-  _max_hardware_current = max_configured_current;
+  _max_hardware_current = max_hardware_current;
   _pilot = pilot;
-  if(_max_configured_current > _max_hardware_current || _max_configured_current < _min_current) {
-    _max_configured_current = _max_hardware_current;
-  }
+  _max_configured_current = max_configured_current;
 }
 
 
@@ -654,10 +651,19 @@ void EvseMonitor::setMaxConfiguredCurrent(long amps)
     amps = _min_current;
   }
 
-  _max_configured_current = amps;
-  DBUGVAR(_max_configured_current);
+  _openevse.setCurrentCapacity(amps, true, [this, amps](int ret, long pilot)
+  {
+    if(RAPI_RESPONSE_OK == ret)
+    {
+      _max_configured_current = amps;
+      DBUGVAR(_max_configured_current);
 
-  _settings_changed.Trigger();
+      _pilot = pilot;
+      DBUGVAR(_pilot);
+
+      _settings_changed.Trigger();
+    }
+  });
 }
 
 void EvseMonitor::getStatusFromEvse(bool allowStart)

src/web_server_config.cpp

@@ -150,6 +150,15 @@ handleConfigPost(MongooseHttpServerRequest *request, MongooseHttpServerResponseS
         DBUGLN("service changed");
       }
     }
+    if(doc.containsKey("max_current_soft"))
+    {
+      long current = doc["max_current_soft"];
+      if(current != evse.getMaxConfiguredCurrent()) {
+        evse.setMaxConfiguredCurrent(current);
+        config_modified = true;
+        DBUGLN("max_current_soft changed");
+      }
+    }
     if(doc.containsKey("scale") && doc.containsKey("offset"))
     {
       long scale = doc["scale"];

test/claims.http

@@ -32,7 +32,8 @@ Content-Type: application/json
 
 {
   "state": "active",
-  "auto_release": true
+  "auto_release": true,
+  "charge_current": 20
 }
 
 ###