Skip to content

V4.1.1
Compare
Choose a tag to compare
@glynhudson glynhudson released this 13 Dec 19:06
· 1199 commits to master since this release
4.1.1
38f2fd8
This commit was created on github.com and signed with GitHub’s verified signature. The key has expired.
GPG key ID: 4AEE18F83AFDEB23
Expired
Learn about vigilant mode.

IMPORTANT: Breaking change! V4.x recommends a minimum of 7.1.2 of the OpenEVSE controller firmware, some features do not function with older EVSE controller firmware.

  • Fix NTP #194
  • Fix re-loading GUI after update #221
  • OCPP further functions #255
  • Fix Tesla login #238 #240
  • Make ESP chip and build info available #49 #223 c2390fd
  • Fix remote hostname access (CORS) #231
  • OCPP fixes #252 #253
  • Fix energy values e.g use kWh and MWh instead of wh for session energy #134
  • Fix claims API #247
  • Enable mDNS discovery #260
  • Fix factory reset via GPIO0 #251

* Note: V4.x is not compatible with Emoncms Demand Shaper. In the future, the smart schedule features of Demand Shaper will be integrated into OpenEVSE directly #4

Updating Firmware

Firmware can be updated via the web interface. Be sure to select the correct firmware for your hardware and unzip before uploading .bin

Wifi Modules

  • Huzzah ESP8266 - can only run V2.x firmware, see archive V2.x repository
  • Huzzah ESP32 - can run V3.x and V4.x firmware - use openevse_huzzah32.bin
  • OpenEVSE V1 - designed for V4.x firmware - currently shipping in 2021 use openevse_wifi_v1.bin
  • Olimex ESP32 Gateway (Wired Ethernet) - can run V3.x and V4.x firmware - use esp32-gateway-e.bin - NOTE: Ethernet gateway does not support HTTP update, FW must be uploaded via micro usb and esptool, see docs.

After updating FW browser cache may need clearing to reload the web interface

If the web interface cannot be loaded, the firmware must be loaded via a USB to serial programmer, see instructions in Readme.md.

Assets 7
Loading