V4.1.3

IMPORTANT: Breaking change! V4.x recommends a minimum of 7.1.2 of the OpenEVSE controller firmware, some features do not function with older EVSE controller firmware.

• Updated GUI with installer changes by @jeremypoulter in #322
• Bump gui from 8e61f97 to 570c4e8 by @dependabot in #330
• Properly handle setting the max current by setting in the value in the EVSE EEPROM rather than the WiFi config by @jeremypoulter in #329
• Cleanups by @toofishes in #345
• Bump minimist from 1.2.5 to 1.2.6 in /tesla_login by @dependabot in #339

Full Changelog: 4.1.2...4.1.3

---

Updating Firmware

Firmware can be updated via the web interface. Be sure to select the correct firmware for your hardware and unzip before uploading .bin

• Huzzah ESP8266 - can only run V2.x firmware, see archive V2.x repository
• Huzzah ESP32 - can run V3.x and V4.x firmware - use openevse_huzzah32.bin
• OpenEVSE V1 - designed for V4.x firmware - currently shipping in 2021 use openevse_wifi_v1.bin
• Olimex ESP32 Gateway (Wired Ethernet) - can run V3.x and V4.x firmware - use esp32-gateway-e.bin - NOTE: Ethernet gateway does not support HTTP update, FW must be uploaded via micro usb and esptool, see docs.

After updating FW browser cache may need clearing to reload the web interface

---

If the web interface cannot be loaded, the firmware must be loaded via a USB to serial programmer, see instructions in Readme.md.