A part of OpenIPC Project
@@ This project needs developers! Please contact Igor Zalatov <flyrouter@gmail.com>. @@
Mini is an open source video streaming software for HiSilicon IP cameras. It is a malnourished and underloved little brother of the commercial Majestic video streamer.
SoC Family | Audio Stream | JPEG Snapshot | RTSP Stream | Motion Detect | On-Screen Display |
---|---|---|---|---|---|
Hi3516CV100 | ✗ | ✗ | ✗ | ⁿ/ₐ | ✗ |
Hi3516CV200 | ✗ | ✔️ | ✔️ | ✔️ | ✗ |
Hi3516CV300 | ✗ | ✔️ | ✔️ | ✔️ | ✗ |
Hi3516CV500 | ✗ | ✗ | ✗ | ✗ | ✗ |
✔️ - supported, ✗ - not supported, ⁿ/ₐ - not supported by hardware
We recommend buying a HiSilicon 3516CV300 + Sony IMX291 board as a development kit. This IP camera module comes with 128MB of RAM and 16MB SPI Flash ROM.
Use Coupler to replace the stock firmware with OpenIPC. You won't even need to solder anything like a UART adapter.
To clone the code locally, run
git clone --recurse-submodules https://github.com/openipc/mini
or, if you have already checked out the repository without submodules, run
git submodule init
git submodule update
Build the code with CMake:
$ cmake -H. -Bbuild \
-DCMAKE_BUILD_TYPE=Release \
-DPLATFORM_SDK_DIR=<PATH_TO_SDK> \
-DCMAKE_EXPORT_COMPILE_COMMANDS=ON \
-DCMAKE_TOOLCHAIN_FILE=tools/cmake/toolchains/arm-openipc-linux-musleabi.cmake
$ cmake --build build
Where <PATH_TO_SDK> is either glutinium/hisi-osdrv2
or glutinium/hisi-osdrv3
.
The Mini streamer does not support sensor autodetection yet. You will need to use
ipcinfo --long_sensor
to determine the sensor model and its control bus, and then set
the path to a corresponding config file as sensor_config
parameter in mini.ini
.