Skip to content

Bridge from RFLink to an mqtt broker using ESP8266 programmed with arduino IDE

Notifications You must be signed in to change notification settings

Phileep/rflink-to-mqtt

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

13 Commits
 
 
 
 
 
 

Repository files navigation

Link between the RF reciever/transmitter project based on an arduino mega, RFLink and MQTT Link to RFLink: http://www.nemcon.nl/blog2/download This includes wiring and device compatability for RFLink. This is used as per the RFLink instructions except that an ESP8266 is used for the serial communication instead of a computer via USB

RFLink is designed to be used by a computer using USB This bridge uses and ESP8266 as the interface, which then encodes the recieved RF data and publishes it as JSON to an MQTT server

RF433 data is recieved by the RFLink and passed on to the ESP8266 The ESP8266 packages it up into a JSON statement and publishes it ot the MQTT broker format on the MQTT broker is: (Recieved RF codes)

Topic: RF/name_of_device-ID_of_device - this tries to have a unique topic per name/id combo. Note - the name and ID are as determined by the RFLink program - it may not be the label printed on the device sending data!

Payload example: {"raw":"20;B3;DKW2012;ID=004c;TEMP=00eb;HUM=3f;WINSP=0000;WINGS=0000;RAIN=0003;WINDIR=0009;\r","TEMP":23.50,"HUM":3,"WINSP":"0000","WINGS":"0000","RAIN":3,"WINDIR":"SSW"} see RFLink documentation for more details: http://www.nemcon.nl/blog2/protref

Sending commands to the RFLink example: (how to send codes to the RFLink)

Topic: RF/command

Payload: 10;Eurodomest;02d0f2;06;ALLON\n Note that the \n on the end is critical at the moment. Otherwise the ESP will either crash or the RFLink will ignore

I included the raw data in full for debugging, then the split out components from RFink There is some conversions made to make the data more useable: Temp is converted to a float from hex Wind direction is converted to a compass heading etc - details in the parseData function in the .ino file

Requirements: Arduino mega 2560 and RF reciever and or transmitter (see RFLink for recommended devices and wiring) ESP8266 device (I have used a node MCU V1.0) an MQTT broker runnning. Tested with Mosquitto on a raspberry Pi 2

Optional: Somethig to read and react to the MQTT measurements I am using Home Assistant, also running on the same Pi : https://home-assistant.io/

Note: If you want to use a username and password for your mqtt broker, Change line 205 in the RFLink_to_MQTT.ino to include username and password as per the PubSubClient API. see https://pubsubclient.knolleary.net/api.html#connect4

Setup:

  1. Confirm RFLink working on its own through your USB port - then you know you are getting data recieved etc Collect some data from your RF433 devices on the system monitor screen and save them for step 2

  2. Set sketch to be in test mode (testmode = true). Load this firmware onto the ESP8266 and run in test mode (so it listens to the PC over USB, not the RFLink) Input some data as recieved in step 1. Check that the ESP connects to your system and publishes topics as expected

  3. Load updated firmware - setting testmode to false (see section for user inputs below) Wire the ESP to the RFLink ESP d5 & d6 to Mega 0 & 1. Check your mqtt broker for recieved data being published.

  4. Setup your home automation to react to the published data and pubish commands to the RFLink

To Do:

  1. ESP will sometimes crash with unexpected output from RFLink. I think it is when you get messages starting with 20 but not with as as many semicolon delimited fields as expected. Currently, I ensure that the Mega (RFLink) is up before restarting the ESP.

  2. Tidy up the callback behaviour for sending data to the RFLink - data is fickle and if you do not terminate with \n it will crash the ESP

Phil Wilson December 2016

About

Bridge from RFLink to an mqtt broker using ESP8266 programmed with arduino IDE

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages