Fish farming system, using IoT

About

System that has an ESP32 and integrated with it are ph, temperature and turbidity sensors. After collection, these parameters are sent via the MQTT protocol to a RaspBerry Pi 0 w, which provides the graphical user interface via the node-red API and also serves as a dedicated server. All sensors were validated and calibrated according to industrial sensors.

Table of Contents

• About
• Table of Contents
• How to use
  • Pre Requirements
  • Operation
• Tests
  • Final result of the system with the data shown in the Node-Red API
• Project status
• Technologies

How to use

Pre Requirements

To run the system you will need to install
*Arduino IDE, configured with the ESP32 library
*Configuration of ips and wifi network passwords
*Raspberry Pi, mosquito installation
*Installing Node-Red API on Raspberry Pi

Operation

Sensor data will be automatically collected and sent to the Raspberry Pi

Tests

Final result of the system with the data shown in the Node-Red API

Project status

🚧 Low cost fish farming system 🚀 under development 🚧

Technologies

Author

Made by Railson Martins 👋🏽!