Release RatOS-v2.0.0-alpha3 · Rat-OS/RatOS

WARNING: this is an alpha, bugs are expected.

Most documentation is still missing (and os.ratrig.com is still showing v1). View preliminary 2.x documentation at https://rat-os.vercel.app/.

this section will be continuously updated

Fixes since alpha 2

Actually fix IPv6 issues. RatOS.local should now work in all cases where mDNS is supported.
The reboot button after doing wifi didn't always work
Better configurator error handling
Better guidance during wifi setup
Octopus v1.1 F407 mistakenly identified instead of V1.1 F446
Log rotation should now work correctly

RatOS Theme now uses correct branch.
Configurator now uses correct script path so board flashing and wifi config works correctly again.
Fixed gcode_shell_command extension, now compatible with python 3.
Replaced MainsailOS net package with original network package, it broke the docs and the configurator and the hotspot.
Disabled sonar as it broke the hotspot.

Long overdue, it's finally here, RatOS v2.0. This release contains a ton of new features.

RatOS v2 is not backwards compatible with RatOS v1, you will have to reflash

this section will be continuously updated

The RatOS configurator will now help you flash your controlboard and toolboards.
Toolboards are now supported.
Stowable probes like euclid and klicky are now support.
Unified homing: everything is now handled through a single homing override. Sensorless homing now requires no tinkering with homing macros (you still need to tweak current and sensitivities). Including a stowable probe config automatically enables deploying and stowing. Axes can now use individual homing procedures, such as sensorless on X and endstops on Y.
MainsailOS has been merged which brings timelapse and crowsnest.
Preinstalled: https://github.com/worksasintended/klipper_linear_movement_analysis
Klipper now runs Python 3

A bunch of new macro variables to tweak the RatOS macros (see https://github.com/Rat-OS/RatOS/blob/v2.x/site/docs/configuration/macros.md), including end park z hop, prime positions, etc etc.
Configurator now maintains klipper and moonraker extension symlinks (will automatically restore in case of a hard reset, can also be triggered automatically through the configurator actions menu at RatOS.local/configure)
Configurator now in charge of flashing all connected boards when klipper is updated.
START_PRINT can now use the hotend to measure chamber temp. For example to wait for chamber to reach 40 degrees, use START_PRINT CHAMBER_TEMP=40. The bed temperature during chamber heating is configurable via the macro variable variable_start_print_heat_chamber_bed_temp.

IPv6 has been disabled (hopefully no more issues with RatOS.local / moonraker not working on IPv6 capable networks).