Home Accessory Architect v12.13.2 Merlin

Changelog 12.13.2:

• Reduced HAA Main binary size to accommodate the upcoming new Advanced Features of HAA v12.14.
• HomeKit: Improved HomeKit data type for the new Advanced Features.
• Lightbulb: Minimal fix for HSI to RGB conversion. See fix (@kevinjohncutler)
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.3.1 with bug fixes.

Changelog 12.13.1:

• Security System: Fixed Service Notification bug on value 8 to stop alarm when recurrent alarm is used.

Changelog 12.13.0:

• Free Monitor: Added option to save last state (value) using "s":5. Last state will be saved only when subsystem is triggered from another service, never from Free Monitor itself.
• Save last states subsystem: Several improvements to reduce CPU, DRAM and flash.
• Added a suffix letter to Installers hostnames, to differentiate between HAABoot: InstallerB, and OTAMain: InstallerM.
• ESP8266:
  • Update SDK esp-open-rtos-rsf to reduce flash footprint.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.3 with many improvements and bug fixes.
  • Freed unused memory of hostname (About 12 bytes of DRAM).

Read Wiki for more info.

Home Accessory Architect v12.13.1 Merlin

Changelog 12.13.1:

• Security System: Fixed Service Notification bug on value 8 to stop alarm when recurrent alarm is used.

Changelog 12.13.0:

• Free Monitor: Added option to save last state (value) using "s":5. Last state will be saved only when subsystem is triggered from another service, never from Free Monitor itself.
• Save last states subsystem: Several improvements to reduce CPU, DRAM and flash.
• Added a suffix letter to Installers hostnames, to differentiate between HAABoot: InstallerB, and OTAMain: InstallerM.
• ESP826:
  • Update SDK esp-open-rtos-rsf to reduce flash footprint.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.3 with many improvements and bug fixes.
  • Freed unused memory of hostname (About 12 bytes of DRAM).

Read Wiki for more info.

Home Accessory Architect v12.13.0 Merlin

Changelog 12.13.0:

• Free Monitor: Added option to save last state (value) using "s":5. Last state will be saved only when subsystem is triggered from another service, never from Free Monitor itself.
• Save last states subsystem: Several improvements to reduce CPU, DRAM and flash.
• Added a suffix letter to Installers hostnames, to differentiate between HAABoot: InstallerB, and OTAMain: InstallerM.
• ESP826:
  • Update SDK esp-open-rtos-rsf to reduce flash footprint.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.3 with many improvements and bug fixes.
  • Freed unused memory of hostname (About 12 bytes of DRAM).

Read Wiki for more info.

Home Accessory Architect v12.12.8 Merlin

Changelog 12.12.8:

• Window Covering: Fixed bug that adds 1% when cover downs in intermediate positions.
• Free Monitor: Fixed bug with reset accumulative with -2182017 value under certain circumstances.
• Free Monitor: Added limits to HomeKit Characteristic when used.
• Power Measure: Added limits to HomeKit Characteristics.

Changelog 12.12.7:

• Window Covering: Improved internal logic.
• Window Covering: Changed default margin value to 5%.
• Some improvements on boot, (related to starting WiFi, NTP client and HomeKit server).
• HAA Installers 7.11.0:
  • Improvements resuming broken connections.

Changelog 12.12.6:

• Window Covering: Send every second current cover position when it is moving, to be used with Apple Home automations in a smarter way. This is not a bug fix; it is a feature that no other firmware has.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.2.2 with many bug fixes.

Changelog 12.12.5:

• HeaterCooler: Added new option "o":N to move deadbands and customize even more the logic. More info...
• HeaterCooler: Removed undocumented test feature "safe margin" added in v12.11.0. The same can be done using Free Monitor service.
• Humidifier: Added new option "o":N to move deadbands and customize even more the logic. More info...
• Lightbulb: Fixed NRZ protocol when more than one GPIO was used.
• I/O Expanders: Fixed bug when GPIOs above 7 were used as output.
• ESP32-C and ESP32-S:
  • Used right TX pin for default UART output for installer firmwares, when device is in setup mode or in capture IR/RF mode; instead GPIO 1 used in prior versions of HAA. More info...

Changelog 12.12.4:

• Improved reset HomeKit ID procedure.
• iAirZoning: Improved logic in "soft" states.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.2.1 with many bug fixes.

Changelog 12.12.3:

• Setup mode: Fixed bug where extra pairings count was not removed when Reset HomeKit ID was used.

Changelog 12.12.2:

• ESP32-C3:
  • Added workaround to fix ESP-IDF v5.2 bug espressif/esp-idf#13197

Changelog 12.12.1:

• Added some delays in installation process when SSL is used to help with bad WiFi environments.
• Improved button pulse mode even more.

Changelog 12.12.0:

• HomeKit: Fixed blocking remove/update pairings when extra pairing is added and device is not rebooted.
• HomeKit: Several improvements getting pairings count when extra pairings is used.
• Improved button pulse mode when pulse time is zero.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.2 with many improvements and bug fixes.
  • Improved critical task locks.
  • DHT and DS18B20 sensors: improved GPIO initialization.

Read Wiki for more info.

Home Accessory Architect v12.12.7 Merlin

Changelog 12.12.7:

• Window Covering: Improved internal logic.
• Window Covering: Changed default margin value to 5%.
• Some improvements on boot, (related to starting WiFi, NTP client and HomeKit server).
• HAA Installers 7.11.0:
  • Improvements resuming broken connections.

Changelog 12.12.6:

• Window Covering: Send every second current cover position when it is moving, to be used with Apple Home automations in a smarter way. This is not a bug fix; it is a feature that no other firmware has.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.2.2 with many bug fixes.

Changelog 12.12.5:

• HeaterCooler: Added new option "o":N to move deadbands and customize even more the logic. More info...
• HeaterCooler: Removed undocumented test feature "safe margin" added in v12.11.0. The same can be done using Free Monitor service.
• Humidifier: Added new option "o":N to move deadbands and customize even more the logic. More info...
• Lightbulb: Fixed NRZ protocol when more than one GPIO was used.
• I/O Expanders: Fixed bug when GPIOs above 7 were used as output.
• ESP32-C and ESP32-S:
  • Used right TX pin for default UART output for installer firmwares, when device is in setup mode or in capture IR/RF mode; instead GPIO 1 used in prior versions of HAA. More info...

Changelog 12.12.4:

• Improved reset HomeKit ID procedure.
• iAirZoning: Improved logic in "soft" states.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.2.1 with many bug fixes.

Changelog 12.12.3:

• Setup mode: Fixed bug where extra pairings count was not removed when Reset HomeKit ID was used.

Changelog 12.12.2:

• ESP32-C3:
  • Added workaround to fix ESP-IDF v5.2 bug espressif/esp-idf#13197

Changelog 12.12.1:

• Added some delays in installation process when SSL is used to help with bad WiFi environments.
• Improved button pulse mode even more.

Changelog 12.12.0:

• HomeKit: Fixed blocking remove/update pairings when extra pairing is added and device is not rebooted.
• HomeKit: Several improvements getting pairings count when extra pairings is used.
• Improved button pulse mode when pulse time is zero.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.2 with many improvements and bug fixes.
  • Improved critical task locks.
  • DHT and DS18B20 sensors: improved GPIO initialization.

Read Wiki for more info.

Home Accessory Architect v12.12.6 Merlin

Changelog 12.12.6:

• Window Covering: Send every second current cover position when it is moving, to be used with Apple Home automations in a smarter way. This is not a bug fix; it is a feature that no other firmware has.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.2.2 with many bug fixes.

Changelog 12.12.5:

• HeaterCooler: Added new option "o":N to move deadbands and customize even more the logic. More info...
• HeaterCooler: Removed undocumented test feature "safe margin" added in v12.11.0. The same can be done using Free Monitor service.
• Humidifier: Added new option "o":N to move deadbands and customize even more the logic. More info...
• Lightbulb: Fixed NRZ protocol when more than one GPIO was used.
• I/O Expanders: Fixed bug when GPIOs above 7 were used as output.
• ESP32-C and ESP32-S:
  • Used right TX pin for default UART output for installer firmwares, when device is in setup mode or in capture IR/RF mode; instead GPIO 1 used in prior versions of HAA. More info...

Changelog 12.12.4:

• Improved reset HomeKit ID procedure.
• iAirZoning: Improved logic in "soft" states.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.2.1 with many bug fixes.

Changelog 12.12.3:

• Setup mode: Fixed bug where extra pairings count was not removed when Reset HomeKit ID was used.

Changelog 12.12.2:

• ESP32-C3:
  • Added workaround to fix ESP-IDF v5.2 bug espressif/esp-idf#13197

Changelog 12.12.1:

• Added some delays in installation process when SSL is used to help with bad WiFi environments.
• Improved button pulse mode even more.

Changelog 12.12.0:

• HomeKit: Fixed blocking remove/update pairings when extra pairing is added and device is not rebooted.
• HomeKit: Several improvements getting pairings count when extra pairings is used.
• Improved button pulse mode when pulse time is zero.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.2 with many improvements and bug fixes.
  • Improved critical task locks.
  • DHT and DS18B20 sensors: improved GPIO initialization.

Read Wiki for more info.

Home Accessory Architect v12.12.5 Merlin

Changelog 12.12.5:

• HeaterCooler: Added new option "o":N to move deadbands and customize even more the logic. More info...
• HeaterCooler: Removed undocumented test feature "safe margin" added in v12.11.0. The same can be done using Free Monitor service.
• Humidifier: Added new option "o":N to move deadbands and customize even more the logic. More info...
• Lightbulb: Fixed NRZ protocol when more than one GPIO was used.
• I/O Expanders: Fixed bug when GPIOs above 7 were used as output.
• ESP32-C and ESP32-S:
  • Used right TX pin for default UART output for installer firmwares, when device is in setup mode or in capture IR/RF mode; instead GPIO 1 used in prior versions of HAA. More info...

Changelog 12.12.4:

• Improved reset HomeKit ID procedure.
• iAirZoning: Improved logic in "soft" states.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.2.1 with many bug fixes.

Changelog 12.12.3:

• Setup mode: Fixed bug where extra pairings count was not removed when Reset HomeKit ID was used.

Changelog 12.12.2:

• ESP32-C3:
  • Added workaround to fix ESP-IDF v5.2 bug espressif/esp-idf#13197

Changelog 12.12.1:

• Added some delays in installation process when SSL is used to help with bad WiFi environments.
• Improved button pulse mode even more.

Changelog 12.12.0:

• HomeKit: Fixed blocking remove/update pairings when extra pairing is added and device is not rebooted.
• HomeKit: Several improvements getting pairings count when extra pairings is used.
• Improved button pulse mode when pulse time is zero.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.2 with many improvements and bug fixes.
  • Improved critical task locks.
  • DHT and DS18B20 sensors: improved GPIO initialization.

Read Wiki for more info.

Home Accessory Architect v12.12.4 Merlin

Changelog 12.12.4:

• Improved reset HomeKit ID procedure.
• iAirZoning: Improved logic in "soft" states.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.2.1 with many bug fixes.

Changelog 12.12.3:

• Setup mode: Fixed bug where extra pairings count was not removed when Reset HomeKit ID was used.

Changelog 12.12.2:

• ESP32-C3:
  • Added workaround to fix ESP-IDF v5.2 bug espressif/esp-idf#13197

Changelog 12.12.1:

• Added some delays in installation process when SSL is used to help with bad WiFi environments.
• Improved button pulse mode even more.

Changelog 12.12.0:

• HomeKit: Fixed blocking remove/update pairings when extra pairing is added and device is not rebooted.
• HomeKit: Several improvements getting pairings count when extra pairings is used.
• Improved button pulse mode when pulse time is zero.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.2 with many improvements and bug fixes.
  • Improved critical task locks.
  • DHT and DS18B20 sensors: improved GPIO initialization.

Read Wiki for more info.

Home Accessory Architect v12.12.3 Merlin

Changelog 12.12.3:

• Setup mode: Fixed bug where extra pairings count was not removed when Reset HomeKit ID was used.

Changelog 12.12.2:

• ESP32-C3:
  • Added workaround to fix ESP-IDF v5.2 bug espressif/esp-idf#13197

Changelog 12.12.1:

• Added some delays in installation process when SSL is used to help with bad WiFi environments.
• Improved button pulse mode even more.

Changelog 12.12.0:

• HomeKit: Fixed blocking remove/update pairings when extra pairing is added and device is not rebooted.
• HomeKit: Several improvements getting pairings count when extra pairings is used.
• Improved button pulse mode when pulse time is zero.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.2 with many improvements and bug fixes.
  • Improved critical task locks.
  • DHT and DS18B20 sensors: improved GPIO initialization.

Read Wiki for more info.

Home Accessory Architect v12.12.2 Merlin

Changelog 12.12.2:

• ESP32-C3:
  • Added workaround to fix ESP-IDF v5.2 bug espressif/esp-idf#13197

Changelog 12.12.1:

• Added some delays in installation process when SSL is used to help with bad WiFi environments.
• Improved button pulse mode even more.

Changelog 12.12.0:

• HomeKit: Fixed blocking remove/update pairings when extra pairing is added and device is not rebooted.
• HomeKit: Several improvements getting pairings count when extra pairings is used.
• Improved button pulse mode when pulse time is zero.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.2 with many improvements and bug fixes.
  • Improved critical task locks.
  • DHT and DS18B20 sensors: improved GPIO initialization.

Read Wiki for more info.