pins.md

Schematics_2.4/pins.md

@@ -1,64 +1,3 @@
-
-Update
-
-I have more pins figured out with a few minor changes to the defines_2-4.h file but I have a few questions.
-
-First let me say thank you so much for the help. I am learning so much on this project and really appreciate it.
-My knowledge of PCB design is still fairly limited so I don't completely understand where to look to find some of the pins. These are the ones I have left over still:
-
-// Mosfet output
-#define MOSFET_OUT_PIN GPIO_PIN_13	//TODO
-#define MOSFET_OUT_PORT GPIOC		//TODO
-
-// Timer BLDC short circuit emergency shutoff define
-#define TIMER_BLDC_EMERGENCY_SHUTDOWN_PIN GPIO_PIN_12	//TODO
-#define TIMER_BLDC_EMERGENCY_SHUTDOWN_PORT GPIOB		//TODO
-
-// ADC defines
-#define VBATT_PIN	GPIO_PIN_4			//TODO
-#define VBATT_PORT GPIOA				//TODO
-#define VBATT_CHANNEL ADC_CHANNEL_4
-#define CURRENT_DC_PIN	GPIO_PIN_6		//TODO
-#define CURRENT_DC_PORT GPIOA			//TODO
-#define CURRENT_DC_CHANNEL ADC_CHANNEL_6
-
-// Self hold defines
-#define SELF_HOLD_PIN GPIO_PIN_2		//TODO
-#define SELF_HOLD_PORT GPIOB			//TODO
-
-// Charge state defines
-#define CHARGE_STATE_PIN GPIO_PIN_0		//TODO
-#define CHARGE_STATE_PORT GPIOF			//TODO
-
-I'm gonna do some research on ADCs tonight and see if I can figure out how this works. I tried to probe around a little and I just don't know enough to get any valuable information out of it. Everything I probed just went to vss or vdd pins but no GPIOs.
-
-I think the self hold is a latching circuit? I don't know much about those yet either so I'll be looking into that as well.
-
-I don't even know where to begin for the charge state pins... I thought that was handled in the charger itself.
-
-And I had some questions about these ones:
-
-#define UPPER_LED_PIN GPIO_PIN_1	//TODO
-#define UPPER_LED_PORT GPIOA		//TODO
-#define LOWER_LED_PIN GPIO_PIN_0	//TODO
-#define LOWER_LED_PORT GPIOA		//TODO
-
-Are these only for hoverboards that had under glow lighting?
-
-// Debug pin defines
-#define DEBUG_PIN GPIO_PIN_4	//TODO
-#define DEBUG_PORT GPIOB		//TODO
-
-Is this referring to a debug header? Like this one?
-image
-
-I have a lot more photos and better documentation for these boards now and I took apart another one to document where some of the other headers went to. The photos aren't complete yet but I've added the new routes I found today and some labels for the unknown connectors.
-Lines
-A Layout
-Documentation
-
-Here is the documentation I have so far in markdown format:
-
 MCU: https://www.gigadevice.com/product/mcu/arm-cortex-m3/gd32f130c8t6
 
 
@@ -123,4 +62,3 @@ LED 0 PINS rotated 90° CC
 ` 0 | 1 `
 0 -> V+
 1 -> PA7
-