-
I used EAB 2.7.1 to convert a 500x236 transparent PNG to compressed ARGB2 targeting BT81x called BoatOutline. I then took the bin file and converted that to c and added it to my project. In my init function, I have the following line to inflate the image: (MEM_BOAT_OUTLINE = 0x000f8000) In my InitStaticContent function I have the following: The display shows roughly the top 25% of the image with some slight scrambling at the bottom of the part that is correct and then just a white box under that, 500 wide by about 175 high. |
Beta Was this translation helpful? Give feedback.
Replies: 3 comments 3 replies
-
I was not leaving enough room for the inflated image, so the static content was overwriting the image content. |
Beta Was this translation helpful? Give feedback.
-
I highly recommend to use ASTC compression for BT81x, ATSC 8x8 for example only uses 2 bits per pixel. |
Beta Was this translation helpful? Give feedback.
I was not leaving enough room for the inflated image, so the static content was overwriting the image content.