Fix missing removal of `mod filesystem` #13

ojeda · 2020-09-18T18:12:49Z

In PR #5 we missed the import removal (let's get some CI)

Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>

alex · 2020-09-18T18:14:08Z

Whoops! Very much agreed on CI!

After commit 92cc68e ("drm/vblank: Use spin_(un)lock_irq() in drm_crtc_vblank_on()") omapdrm locking is broken: WARNING: inconsistent lock state 5.8.0-rc2-00483-g92cc68e35863 #13 Tainted: G W -------------------------------- inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. swapper/0/0 [HC1[1]:SC0[0]:HE0:SE1] takes: ea98222c (&dev->event_lock#2){?.+.}-{2:2}, at: drm_handle_vblank+0x4c/0x520 [drm] {HARDIRQ-ON-W} state was registered at: trace_hardirqs_on+0x9c/0x1ec _raw_spin_unlock_irq+0x20/0x58 omap_crtc_atomic_enable+0x54/0xa0 [omapdrm] drm_atomic_helper_commit_modeset_enables+0x218/0x270 [drm_kms_helper] omap_atomic_commit_tail+0x48/0xc4 [omapdrm] commit_tail+0x9c/0x190 [drm_kms_helper] drm_atomic_helper_commit+0x154/0x188 [drm_kms_helper] drm_client_modeset_commit_atomic+0x228/0x268 [drm] drm_client_modeset_commit_locked+0x60/0x1d0 [drm] drm_client_modeset_commit+0x24/0x40 [drm] drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa8 [drm_kms_helper] drm_fb_helper_set_par+0x2c/0x5c [drm_kms_helper] drm_fb_helper_hotplug_event.part.0+0xa0/0xbc [drm_kms_helper] drm_kms_helper_hotplug_event+0x24/0x30 [drm_kms_helper] output_poll_execute+0x1a8/0x1c0 [drm_kms_helper] process_one_work+0x268/0x800 worker_thread+0x30/0x4e0 kthread+0x164/0x190 ret_from_fork+0x14/0x20 The reason for this is that omapdrm calls drm_crtc_vblank_on() while holding event_lock taken with spin_lock_irq(). It is not clear why drm_crtc_vblank_on() and drm_crtc_vblank_get() are called while holding event_lock. I don't see any problem with moving those calls outside the lock, which is what this patch does. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200819103021.440288-1-tomi.valkeinen@ti.com Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

…s metrics" test Linux 5.9 introduced perf test case "Parse and process metrics" and on s390 this test case always dumps core: [root@t35lp67 perf]# ./perf test -vvvv -F 67 67: Parse and process metrics : --- start --- metric expr inst_retired.any / cpu_clk_unhalted.thread for IPC parsing metric: inst_retired.any / cpu_clk_unhalted.thread Segmentation fault (core dumped) [root@t35lp67 perf]# I debugged this core dump and gdb shows this call chain: (gdb) where #0 0x000003ffabc3192a in __strnlen_c_1 () from /lib64/libc.so.6 #1 0x000003ffabc293de in strcasestr () from /lib64/libc.so.6 #2 0x0000000001102ba2 in match_metric(list=0x1e6ea20 "inst_retired.any", n=<optimized out>) at util/metricgroup.c:368 #3 find_metric (map=<optimized out>, map=<optimized out>, metric=0x1e6ea20 "inst_retired.any") at util/metricgroup.c:765 #4 __resolve_metric (ids=0x0, map=<optimized out>, metric_list=0x0, metric_no_group=<optimized out>, m=<optimized out>) at util/metricgroup.c:844 #5 resolve_metric (ids=0x0, map=0x0, metric_list=0x0, metric_no_group=<optimized out>) at util/metricgroup.c:881 #6 metricgroup__add_metric (metric=<optimized out>, metric_no_group=metric_no_group@entry=false, events=<optimized out>, events@entry=0x3ffd84fb878, metric_list=0x0, metric_list@entry=0x3ffd84fb868, map=0x0) at util/metricgroup.c:943 #7 0x00000000011034ae in metricgroup__add_metric_list (map=0x13f9828 <map>, metric_list=0x3ffd84fb868, events=0x3ffd84fb878, metric_no_group=<optimized out>, list=<optimized out>) at util/metricgroup.c:988 #8 parse_groups (perf_evlist=perf_evlist@entry=0x1e70260, str=str@entry=0x12f34b2 "IPC", metric_no_group=<optimized out>, metric_no_merge=<optimized out>, fake_pmu=fake_pmu@entry=0x1462f18 <perf_pmu.fake>, metric_events=0x3ffd84fba58, map=0x1) at util/metricgroup.c:1040 #9 0x0000000001103eb2 in metricgroup__parse_groups_test( evlist=evlist@entry=0x1e70260, map=map@entry=0x13f9828 <map>, str=str@entry=0x12f34b2 "IPC", metric_no_group=metric_no_group@entry=false, metric_no_merge=metric_no_merge@entry=false, metric_events=0x3ffd84fba58) at util/metricgroup.c:1082 #10 0x00000000010c84d8 in __compute_metric (ratio2=0x0, name2=0x0, ratio1=<synthetic pointer>, name1=0x12f34b2 "IPC", vals=0x3ffd84fbad8, name=0x12f34b2 "IPC") at tests/parse-metric.c:159 #11 compute_metric (ratio=<synthetic pointer>, vals=0x3ffd84fbad8, name=0x12f34b2 "IPC") at tests/parse-metric.c:189 #12 test_ipc () at tests/parse-metric.c:208 ..... ..... omitted many more lines This test case was added with commit 218ca91 ("perf tests: Add parse metric test for frontend metric"). When I compile with make DEBUG=y it works fine and I do not get a core dump. It turned out that the above listed function call chain worked on a struct pmu_event array which requires a trailing element with zeroes which was missing. The marco map_for_each_event() loops over that array tests for members metric_expr/metric_name/metric_group being non-NULL. Adding this element fixes the issue. Output after: [root@t35lp46 perf]# ./perf test 67 67: Parse and process metrics : Ok [root@t35lp46 perf]# Committer notes: As Ian remarks, this is not s390 specific: <quote Ian> This also shows up with address sanitizer on all architectures (perhaps change the patch title) and perhaps add a "Fixes: <commit>" tag. ================================================================= ==4718==ERROR: AddressSanitizer: global-buffer-overflow on address 0x55c93b4d59e8 at pc 0x55c93a1541e2 bp 0x7ffd24327c60 sp 0x7ffd24327c58 READ of size 8 at 0x55c93b4d59e8 thread T0 #0 0x55c93a1541e1 in find_metric tools/perf/util/metricgroup.c:764:2 #1 0x55c93a153e6c in __resolve_metric tools/perf/util/metricgroup.c:844:9 #2 0x55c93a152f18 in resolve_metric tools/perf/util/metricgroup.c:881:9 #3 0x55c93a1528db in metricgroup__add_metric tools/perf/util/metricgroup.c:943:9 #4 0x55c93a151996 in metricgroup__add_metric_list tools/perf/util/metricgroup.c:988:9 #5 0x55c93a1511b9 in parse_groups tools/perf/util/metricgroup.c:1040:8 #6 0x55c93a1513e1 in metricgroup__parse_groups_test tools/perf/util/metricgroup.c:1082:9 #7 0x55c93a0108ae in __compute_metric tools/perf/tests/parse-metric.c:159:8 #8 0x55c93a010744 in compute_metric tools/perf/tests/parse-metric.c:189:9 #9 0x55c93a00f5ee in test_ipc tools/perf/tests/parse-metric.c:208:2 #10 0x55c93a00f1e8 in test__parse_metric tools/perf/tests/parse-metric.c:345:2 #11 0x55c939fd7202 in run_test tools/perf/tests/builtin-test.c:410:9 #12 0x55c939fd6736 in test_and_print tools/perf/tests/builtin-test.c:440:9 #13 0x55c939fd58c3 in __cmd_test tools/perf/tests/builtin-test.c:661:4 #14 0x55c939fd4e02 in cmd_test tools/perf/tests/builtin-test.c:807:9 #15 0x55c939e4763d in run_builtin tools/perf/perf.c:313:11 #16 0x55c939e46475 in handle_internal_command tools/perf/perf.c:365:8 #17 0x55c939e4737e in run_argv tools/perf/perf.c:409:2 #18 0x55c939e45f7e in main tools/perf/perf.c:539:3 0x55c93b4d59e8 is located 0 bytes to the right of global variable 'pme_test' defined in 'tools/perf/tests/parse-metric.c:17:25' (0x55c93b4d54a0) of size 1352 SUMMARY: AddressSanitizer: global-buffer-overflow tools/perf/util/metricgroup.c:764:2 in find_metric Shadow bytes around the buggy address: 0x0ab9a7692ae0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692af0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>0x0ab9a7692b30: 00 00 00 00 00 00 00 00 00 00 00 00 00[f9]f9 f9 0x0ab9a7692b40: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 0x0ab9a7692b50: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 0x0ab9a7692b60: f9 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 00 00 00 00 0x0ab9a7692b70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b80: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb Shadow gap: cc </quote> I'm also adding the missing "Fixes" tag and setting just .name to NULL, as doing it that way is more compact (the compiler will zero out everything else) and the table iterators look for .name being NULL as the sentinel marking the end of the table. Fixes: 0a507af ("perf tests: Add parse metric test for ipc metric") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/20200825071211.16959-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The aliases were never released causing the following leaks: Indirect leak of 1224 byte(s) in 9 object(s) allocated from: #0 0x7feefb830628 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x107628) #1 0x56332c8f1b62 in __perf_pmu__new_alias util/pmu.c:322 #2 0x56332c8f401f in pmu_add_cpu_aliases_map util/pmu.c:778 #3 0x56332c792ce9 in __test__pmu_event_aliases tests/pmu-events.c:295 #4 0x56332c792ce9 in test_aliases tests/pmu-events.c:367 #5 0x56332c76a09b in run_test tests/builtin-test.c:410 #6 0x56332c76a09b in test_and_print tests/builtin-test.c:440 #7 0x56332c76ce69 in __cmd_test tests/builtin-test.c:695 #8 0x56332c76ce69 in cmd_test tests/builtin-test.c:807 #9 0x56332c7d2214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x56332c6701a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x56332c6701a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x56332c6701a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7feefb359cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 956a783 ("perf test: Test pmu-events aliases") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: John Garry <john.garry@huawei.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-11-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evsel->unit borrows a pointer of pmu event or alias instead of owns a string. But tool event (duration_time) passes a result of strdup() caused a leak. It was found by ASAN during metric test: Direct leak of 210 byte(s) in 70 object(s) allocated from: #0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5) #1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414 #2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414 #3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439 #4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096 #5 0x559fbbcc95da in __parse_events util/parse-events.c:2141 #6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406 #7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393 #8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415 #9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498 #10 0x559fbbc0109b in run_test tests/builtin-test.c:410 #11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440 #12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695 #13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807 #14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: f0fbb11 ("perf stat: Implement duration_time as a proper event") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The test_generic_metric() missed to release entries in the pctx. Asan reported following leak (and more): Direct leak of 128 byte(s) in 1 object(s) allocated from: #0 0x7f4c9396980e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x55f7e748cc14 in hashmap_grow (/home/namhyung/project/linux/tools/perf/perf+0x90cc14) #2 0x55f7e748d497 in hashmap__insert (/home/namhyung/project/linux/tools/perf/perf+0x90d497) #3 0x55f7e7341667 in hashmap__set /home/namhyung/project/linux/tools/perf/util/hashmap.h:111 #4 0x55f7e7341667 in expr__add_ref util/expr.c:120 #5 0x55f7e7292436 in prepare_metric util/stat-shadow.c:783 #6 0x55f7e729556d in test_generic_metric util/stat-shadow.c:858 #7 0x55f7e712390b in compute_single tests/parse-metric.c:128 #8 0x55f7e712390b in __compute_metric tests/parse-metric.c:180 #9 0x55f7e712446d in compute_metric tests/parse-metric.c:196 #10 0x55f7e712446d in test_dcache_l2 tests/parse-metric.c:295 #11 0x55f7e712446d in test__parse_metric tests/parse-metric.c:355 #12 0x55f7e70be09b in run_test tests/builtin-test.c:410 #13 0x55f7e70be09b in test_and_print tests/builtin-test.c:440 #14 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661 #15 0x55f7e70c101a in cmd_test tests/builtin-test.c:807 #16 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #17 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #18 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #19 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #20 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 6d432c4 ("perf tools: Add test_generic_metric function") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-8-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The metricgroup__add_metric() can find multiple match for a metric group and it's possible to fail. Also it can fail in the middle like in resolve_metric() even for single metric. In those cases, the intermediate list and ids will be leaked like: Direct leak of 3 byte(s) in 1 object(s) allocated from: #0 0x7f4c938f40b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5) #1 0x55f7e71c1bef in __add_metric util/metricgroup.c:683 #2 0x55f7e71c31d0 in add_metric util/metricgroup.c:906 #3 0x55f7e71c3844 in metricgroup__add_metric util/metricgroup.c:940 #4 0x55f7e71c488d in metricgroup__add_metric_list util/metricgroup.c:993 #5 0x55f7e71c488d in parse_groups util/metricgroup.c:1045 #6 0x55f7e71c60a4 in metricgroup__parse_groups_test util/metricgroup.c:1087 #7 0x55f7e71235ae in __compute_metric tests/parse-metric.c:164 #8 0x55f7e7124650 in compute_metric tests/parse-metric.c:196 #9 0x55f7e7124650 in test_recursion_fail tests/parse-metric.c:318 #10 0x55f7e7124650 in test__parse_metric tests/parse-metric.c:356 #11 0x55f7e70be09b in run_test tests/builtin-test.c:410 #12 0x55f7e70be09b in test_and_print tests/builtin-test.c:440 #13 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661 #14 0x55f7e70c101a in cmd_test tests/builtin-test.c:807 #15 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #16 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #17 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #18 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #19 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 83de0b7 ("perf metric: Collect referenced metrics in struct metric_ref_node") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-9-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 #4 0x560578e07045 in test__pmu tests/pmu.c:155 #5 0x560578de109b in run_test tests/builtin-test.c:410 #6 0x560578de109b in test_and_print tests/builtin-test.c:440 #7 0x560578de401a in __cmd_test tests/builtin-test.c:661 #8 0x560578de401a in cmd_test tests/builtin-test.c:807 #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f95 ("perf tests: Move pmu tests into separate object") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evlist has the maps with its own refcounts so we don't need to set the pointers to NULL. Otherwise following error was reported by Asan. # perf test -v 4 4: Read samples using the mmap interface : --- start --- test child forked, pid 139782 mmap size 528384B ================================================================= ==139782==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f1f76daee8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x564ba21a0fea in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x564ba21a1a0f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x564ba21a21cf in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x564ba21a21cf in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x564ba1e48298 in test__basic_mmap tests/mmap-basic.c:55 #6 0x564ba1e278fb in run_test tests/builtin-test.c:428 #7 0x564ba1e278fb in test_and_print tests/builtin-test.c:458 #8 0x564ba1e29a53 in __cmd_test tests/builtin-test.c:679 #9 0x564ba1e29a53 in cmd_test tests/builtin-test.c:825 #10 0x564ba1e95cb4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x564ba1d1fa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x564ba1d1fa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x564ba1d1fa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7f1f768e4d09 in __libc_start_main ../csu/libc-start.c:308 ... test child finished with 1 ---- end ---- Read samples using the mmap interface: FAILED! failed to open shell test directory: /home/namhyung/libexec/perf-core/tests/shell Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20210301140409.184570-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evlist and the cpu/thread maps should be released together. Otherwise following error was reported by Asan. Note that this test still has memory leaks in DSOs so it still fails even after this change. I'll take a look at that too. # perf test -v 26 26: Object code reading : --- start --- test child forked, pid 154184 Looking at the vmlinux_path (8 entries long) symsrc__init: build id mismatch for vmlinux. symsrc__init: cannot get elf header. Using /proc/kcore for kernel data Using /proc/kallsyms for symbols Parsing event 'cycles' mmap size 528384B ... ================================================================= ==154184==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fcb66e77037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x55ad9b7e821e in dso__new_id util/dso.c:1256 #2 0x55ad9b8cfd4a in __machine__addnew_vdso util/vdso.c:132 #3 0x55ad9b8cfd4a in machine__findnew_vdso util/vdso.c:347 #4 0x55ad9b845b7e in map__new util/map.c:176 #5 0x55ad9b8415a2 in machine__process_mmap2_event util/machine.c:1787 #6 0x55ad9b8fab16 in perf_tool__process_synth_event util/synthetic-events.c:64 #7 0x55ad9b8fab16 in perf_event__synthesize_mmap_events util/synthetic-events.c:499 #8 0x55ad9b8fbfdf in __event__synthesize_thread util/synthetic-events.c:741 #9 0x55ad9b8ff3e3 in perf_event__synthesize_thread_map util/synthetic-events.c:833 #10 0x55ad9b738585 in do_test_code_reading tests/code-reading.c:608 #11 0x55ad9b73b25d in test__code_reading tests/code-reading.c:722 #12 0x55ad9b6f28fb in run_test tests/builtin-test.c:428 #13 0x55ad9b6f28fb in test_and_print tests/builtin-test.c:458 #14 0x55ad9b6f4a53 in __cmd_test tests/builtin-test.c:679 #15 0x55ad9b6f4a53 in cmd_test tests/builtin-test.c:825 #16 0x55ad9b760cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #17 0x55ad9b5eaa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #18 0x55ad9b5eaa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #19 0x55ad9b5eaa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #20 0x7fcb669acd09 in __libc_start_main ../csu/libc-start.c:308 ... SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Object code reading: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evlist and the cpu/thread maps should be released together. Otherwise following error was reported by Asan. $ perf test -v 28 28: Use a dummy software event to keep tracking: --- start --- test child forked, pid 156810 mmap size 528384B ================================================================= ==156810==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f637d2bce8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55cc6295cffa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55cc6295da1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x55cc6295e1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x55cc6295e1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x55cc626287cf in test__keep_tracking tests/keep-tracking.c:84 #6 0x55cc625e38fb in run_test tests/builtin-test.c:428 #7 0x55cc625e38fb in test_and_print tests/builtin-test.c:458 #8 0x55cc625e5a53 in __cmd_test tests/builtin-test.c:679 #9 0x55cc625e5a53 in cmd_test tests/builtin-test.c:825 #10 0x55cc62651cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x55cc624dba88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x55cc624dba88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x55cc624dba88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7f637cdf2d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Use a dummy software event to keep tracking: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-7-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evlist and cpu/thread maps should be released together. Otherwise the following error was reported by Asan. $ perf test -v 35 35: Track with sched_switch : --- start --- test child forked, pid 159287 Using CPUID GenuineIntel-6-8E-C mmap size 528384B 1295 events recorded ================================================================= ==159287==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7fa28d9a2e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x5652f5a5affa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x5652f5a5ba1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x5652f5a5c1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x5652f5a5c1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x5652f5723bbf in test__switch_tracking tests/switch-tracking.c:350 #6 0x5652f56e18fb in run_test tests/builtin-test.c:428 #7 0x5652f56e18fb in test_and_print tests/builtin-test.c:458 #8 0x5652f56e3a53 in __cmd_test tests/builtin-test.c:679 #9 0x5652f56e3a53 in cmd_test tests/builtin-test.c:825 #10 0x5652f574fcc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x5652f55d9a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x5652f55d9a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x5652f55d9a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7fa28d4d8d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Track with sched_switch: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-8-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It should be released after printing the map. $ perf test -v 52 52: Print cpu map : --- start --- test child forked, pid 172233 ================================================================= ==172233==ERROR: LeakSanitizer: detected memory leaks Direct leak of 156 byte(s) in 1 object(s) allocated from: #0 0x7fc472518e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55e63b378f7a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55e63b37a05c in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:237 #3 0x55e63b056d16 in cpu_map_print tests/cpumap.c:102 #4 0x55e63b056d16 in test__cpu_map_print tests/cpumap.c:120 #5 0x55e63afff8fb in run_test tests/builtin-test.c:428 #6 0x55e63afff8fb in test_and_print tests/builtin-test.c:458 #7 0x55e63b001a53 in __cmd_test tests/builtin-test.c:679 #8 0x55e63b001a53 in cmd_test tests/builtin-test.c:825 #9 0x55e63b06dc44 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #10 0x55e63aef7a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #11 0x55e63aef7a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #12 0x55e63aef7a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #13 0x7fc47204ed09 in __libc_start_main ../csu/libc-start.c:308 ... SUMMARY: AddressSanitizer: 448 byte(s) leaked in 7 allocation(s). test child finished with 1 ---- end ---- Print cpu map: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-11-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It should release the maps at the end. $ perf test -v 71 71: Convert perf time to TSC : --- start --- test child forked, pid 178744 mmap size 528384B 1st event perf time 59207256505278 tsc 13187166645142 rdtsc time 59207256542151 tsc 13187166723020 2nd event perf time 59207256543749 tsc 13187166726393 ================================================================= ==178744==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7faf601f9e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55b620cfc00a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55b620cfca2f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x55b620cfd1ef in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x55b620cfd1ef in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x55b6209ef1b2 in test__perf_time_to_tsc tests/perf-time-to-tsc.c:73 #6 0x55b6209828fb in run_test tests/builtin-test.c:428 #7 0x55b6209828fb in test_and_print tests/builtin-test.c:458 #8 0x55b620984a53 in __cmd_test tests/builtin-test.c:679 #9 0x55b620984a53 in cmd_test tests/builtin-test.c:825 #10 0x55b6209f0cd4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x55b62087aa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x55b62087aa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x55b62087aa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7faf5fd2fd09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Convert perf time to TSC: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-12-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

I got a segfault when using -r option with event groups. The option makes it run the workload multiple times and it will reuse the evlist and evsel for each run. While most of resources are allocated and freed properly, the id hash in the evlist was not and it resulted in the bug. You can see it with the address sanitizer like below: $ perf stat -r 100 -e '{cycles,instructions}' true ================================================================= ==693052==ERROR: AddressSanitizer: heap-use-after-free on address 0x6080000003d0 at pc 0x558c57732835 bp 0x7fff1526adb0 sp 0x7fff1526ada8 WRITE of size 8 at 0x6080000003d0 thread T0 #0 0x558c57732834 in hlist_add_head /home/namhyung/project/linux/tools/include/linux/list.h:644 #1 0x558c57732834 in perf_evlist__id_hash /home/namhyung/project/linux/tools/lib/perf/evlist.c:237 #2 0x558c57732834 in perf_evlist__id_add /home/namhyung/project/linux/tools/lib/perf/evlist.c:244 #3 0x558c57732834 in perf_evlist__id_add_fd /home/namhyung/project/linux/tools/lib/perf/evlist.c:285 #4 0x558c5747733e in store_evsel_ids util/evsel.c:2765 #5 0x558c5747733e in evsel__store_ids util/evsel.c:2782 #6 0x558c5730b717 in __run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:895 #7 0x558c5730b717 in run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:1014 #8 0x558c5730b717 in cmd_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:2446 #9 0x558c57427c24 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #10 0x558c572b1a48 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #11 0x558c572b1a48 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #12 0x558c572b1a48 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #13 0x7fcadb9f7d09 in __libc_start_main ../csu/libc-start.c:308 #14 0x558c572b60f9 in _start (/home/namhyung/project/linux/tools/perf/perf+0x45d0f9) Actually the nodes in the hash table are struct perf_stream_id and they were freed in the previous run. Fix it by resetting the hash. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210225035148.778569-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

'nj_setup' in netjet.c might fail with -EIO and in this case 'card->irq' is initialized and is bigger than zero. A subsequent call to 'nj_release' will free the irq that has not been requested. Fix this bug by deleting the previous assignment to 'card->irq' and just keep the assignment before 'request_irq'. The KASAN's log reveals it: [ 3.354615 ] WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1826 free_irq+0x100/0x480 [ 3.355112 ] Modules linked in: [ 3.355310 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e Rust-for-Linux#13 [ 3.355816 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.356552 ] RIP: 0010:free_irq+0x100/0x480 [ 3.356820 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80 [ 3.358012 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082 [ 3.358357 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX: 0000000000000000 [ 3.358814 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI: 00000000ffffffff [ 3.359272 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09: 0000000000000000 [ 3.359732 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12: 0000000000000000 [ 3.360195 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15: ffff888104dc80a8 [ 3.360652 ] FS: 0000000000000000(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 [ 3.361170 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.361538 ] CR2: 0000000000000000 CR3: 000000000582e000 CR4: 00000000000006f0 [ 3.362003 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.362175 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.362175 ] Call Trace: [ 3.362175 ] nj_release+0x51/0x1e0 [ 3.362175 ] nj_probe+0x450/0x950 [ 3.362175 ] ? pci_device_remove+0x110/0x110 [ 3.362175 ] local_pci_probe+0x45/0xa0 [ 3.362175 ] pci_device_probe+0x12b/0x1d0 [ 3.362175 ] really_probe+0x2a9/0x610 [ 3.362175 ] driver_probe_device+0x90/0x1d0 [ 3.362175 ] ? mutex_lock_nested+0x1b/0x20 [ 3.362175 ] device_driver_attach+0x68/0x70 [ 3.362175 ] __driver_attach+0x124/0x1b0 [ 3.362175 ] ? device_driver_attach+0x70/0x70 [ 3.362175 ] bus_for_each_dev+0xbb/0x110 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] driver_attach+0x27/0x30 [ 3.362175 ] bus_add_driver+0x1eb/0x2a0 [ 3.362175 ] driver_register+0xa9/0x180 [ 3.362175 ] __pci_register_driver+0x82/0x90 [ 3.362175 ] ? w6692_init+0x38/0x38 [ 3.362175 ] nj_init+0x36/0x38 [ 3.362175 ] do_one_initcall+0x7f/0x3d0 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.362175 ] kernel_init_freeable+0x2aa/0x301 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] kernel_init+0x18/0x190 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ret_from_fork+0x1f/0x30 [ 3.362175 ] Kernel panic - not syncing: panic_on_warn set ... [ 3.362175 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e Rust-for-Linux#13 [ 3.362175 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.362175 ] Call Trace: [ 3.362175 ] dump_stack+0xba/0xf5 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] panic+0x15a/0x3f2 [ 3.362175 ] ? __warn+0xf2/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] __warn+0x108/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] report_bug+0x119/0x1c0 [ 3.362175 ] handle_bug+0x3b/0x80 [ 3.362175 ] exc_invalid_op+0x18/0x70 [ 3.362175 ] asm_exc_invalid_op+0x12/0x20 [ 3.362175 ] RIP: 0010:free_irq+0x100/0x480 [ 3.362175 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80 [ 3.362175 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082 [ 3.362175 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX: 0000000000000000 [ 3.362175 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI: 00000000ffffffff [ 3.362175 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09: 0000000000000000 [ 3.362175 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12: 0000000000000000 [ 3.362175 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15: ffff888104dc80a8 [ 3.362175 ] ? vprintk+0x76/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] nj_release+0x51/0x1e0 [ 3.362175 ] nj_probe+0x450/0x950 [ 3.362175 ] ? pci_device_remove+0x110/0x110 [ 3.362175 ] local_pci_probe+0x45/0xa0 [ 3.362175 ] pci_device_probe+0x12b/0x1d0 [ 3.362175 ] really_probe+0x2a9/0x610 [ 3.362175 ] driver_probe_device+0x90/0x1d0 [ 3.362175 ] ? mutex_lock_nested+0x1b/0x20 [ 3.362175 ] device_driver_attach+0x68/0x70 [ 3.362175 ] __driver_attach+0x124/0x1b0 [ 3.362175 ] ? device_driver_attach+0x70/0x70 [ 3.362175 ] bus_for_each_dev+0xbb/0x110 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] driver_attach+0x27/0x30 [ 3.362175 ] bus_add_driver+0x1eb/0x2a0 [ 3.362175 ] driver_register+0xa9/0x180 [ 3.362175 ] __pci_register_driver+0x82/0x90 [ 3.362175 ] ? w6692_init+0x38/0x38 [ 3.362175 ] nj_init+0x36/0x38 [ 3.362175 ] do_one_initcall+0x7f/0x3d0 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.362175 ] kernel_init_freeable+0x2aa/0x301 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] kernel_init+0x18/0x190 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ret_from_fork+0x1f/0x30 [ 3.362175 ] Dumping ftrace buffer: [ 3.362175 ] (ftrace buffer empty) [ 3.362175 ] Kernel Offset: disabled [ 3.362175 ] Rebooting in 1 seconds.. Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

When TEE target mirrors traffic to another interface, sk_buff may not have enough headroom to be processed correctly. ip_finish_output2() detect this situation for ipv4 and allocates new skb with enogh headroom. However ipv6 lacks this logic in ip_finish_output2 and it leads to skb_under_panic: skbuff: skb_under_panic: text:ffffffffc0866ad4 len:96 put:24 head:ffff97be85e31800 data:ffff97be85e317f8 tail:0x58 end:0xc0 dev:gre0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:110! invalid opcode: 0000 [#1] SMP PTI CPU: 2 PID: 393 Comm: kworker/2:2 Tainted: G OE 5.13.0 #13 Hardware name: Virtuozzo KVM, BIOS 1.11.0-2.vz7.4 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:skb_panic+0x48/0x4a Call Trace: skb_push.cold.111+0x10/0x10 ipgre_header+0x24/0xf0 [ip_gre] neigh_connected_output+0xae/0xf0 ip6_finish_output2+0x1a8/0x5a0 ip6_output+0x5c/0x110 nf_dup_ipv6+0x158/0x1000 [nf_dup_ipv6] tee_tg6+0x2e/0x40 [xt_TEE] ip6t_do_table+0x294/0x470 [ip6_tables] nf_hook_slow+0x44/0xc0 nf_hook.constprop.34+0x72/0xe0 ndisc_send_skb+0x20d/0x2e0 ndisc_send_ns+0xd1/0x210 addrconf_dad_work+0x3c8/0x540 process_one_work+0x1d1/0x370 worker_thread+0x30/0x390 kthread+0x116/0x130 ret_from_fork+0x22/0x30 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>

It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 Rust-for-Linux#1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 Rust-for-Linux#2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 Rust-for-Linux#3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 Rust-for-Linux#4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 Rust-for-Linux#5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 Rust-for-Linux#6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 Rust-for-Linux#7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 Rust-for-Linux#8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 Rust-for-Linux#9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 Rust-for-Linux#10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 Rust-for-Linux#11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 Rust-for-Linux#12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 Rust-for-Linux#13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 Rust-for-Linux#14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 Rust-for-Linux#15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 Rust-for-Linux#16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 Rust-for-Linux#17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 Rust-for-Linux#18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame Rust-for-Linux#2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <mpetlan@redhat.com> CC: Milian Wolff <milian.wolff@kdab.com> Cc: Jiri Olsa <jolsa@redhat.com> Fixes: 1fb7d06 ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/20210719145332.29747-1-mpetlan@redhat.com Reported-by: Juri Lelli <jlelli@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

ARM: kasan: Fix __get_user_check failure with kasan In macro __get_user_check defined in arch/arm/include/asm/uaccess.h, error code is store in register int __e(r0). When kasan is enabled, assigning value to kernel address might trigger kasan check, which unexpectedly overwrites r0 and causes undefined behavior on arm kasan images. One example is failure in do_futex and results in process soft lockup. Log: watchdog: BUG: soft lockup - CPU#0 stuck for 62946ms! [rs:main Q:Reg:1151] ... (__asan_store4) from (futex_wait_setup+0xf8/0x2b4) (futex_wait_setup) from (futex_wait+0x138/0x394) (futex_wait) from (do_futex+0x164/0xe40) (do_futex) from (sys_futex_time32+0x178/0x230) (sys_futex_time32) from (ret_fast_syscall+0x0/0x50) The soft lockup happens in function futex_wait_setup. The reason is function get_futex_value_locked always return EINVAL, thus pc jump back to retry label and causes looping. This line in function get_futex_value_locked ret = __get_user(*dest, from); is expanded to *dest = (typeof(*(p))) __r2; , in macro __get_user_check. Writing to pointer dest triggers kasan check and overwrites the return value of __get_user_x function. The assembly code of get_futex_value_locked in kernel/futex.c: ... c01f6dc8: eb0b020e bl c04b7608 <__get_user_4> // "x = (typeof(*(p))) __r2;" triggers kasan check and r0 is overwritten c01f6dCc: e1a00007 mov r0, r7 c01f6dd0: e1a05002 mov r5, r2 c01f6dd4: eb04f1e6 bl c0333574 <__asan_store4> c01f6dd8: e5875000 str r5, [r7] // save ret value of __get_user(*dest, from), which is dest address now c01f6ddc: e1a05000 mov r5, r0 ... // checking return value of __get_user failed c01f6e00: e3550000 cmp r5, #0 ... c01f6e0c: 01a00005 moveq r0, r5 // assign return value to EINVAL c01f6e10: 13e0000d mvnne r0, #13 Return value is the destination address of get_user thus certainly non-zero, so get_futex_value_locked always return EINVAL. Fix it by using a tmp vairable to store the error code before the assignment. This fix has no effects to non-kasan images thanks to compiler optimization. It only affects cases that overwrite r0 due to kasan check. This should fix bug discussed in Link: [1] https://lore.kernel.org/linux-arm-kernel/0ef7c2a5-5d8b-c5e0-63fa-31693fd4495c@gmail.com/ Fixes: 4210157 ("ARM: 9017/2: Enable KASan for ARM") Signed-off-by: Lexi Shao <shaolexi@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

The exit function fixes a memory leak with the src field as detected by leak sanitizer. An example of which is: Indirect leak of 25133184 byte(s) in 207 object(s) allocated from: #0 0x7f199ecfe987 in __interceptor_calloc libsanitizer/asan/asan_malloc_linux.cpp:154 Rust-for-Linux#1 0x55defe638224 in annotated_source__alloc_histograms util/annotate.c:803 Rust-for-Linux#2 0x55defe6397e4 in symbol__hists util/annotate.c:952 Rust-for-Linux#3 0x55defe639908 in symbol__inc_addr_samples util/annotate.c:968 Rust-for-Linux#4 0x55defe63aa29 in hist_entry__inc_addr_samples util/annotate.c:1119 Rust-for-Linux#5 0x55defe499a79 in hist_iter__report_callback tools/perf/builtin-report.c:182 Rust-for-Linux#6 0x55defe7a859d in hist_entry_iter__add util/hist.c:1236 Rust-for-Linux#7 0x55defe49aa63 in process_sample_event tools/perf/builtin-report.c:315 Rust-for-Linux#8 0x55defe731bc8 in evlist__deliver_sample util/session.c:1473 Rust-for-Linux#9 0x55defe731e38 in machines__deliver_event util/session.c:1510 Rust-for-Linux#10 0x55defe732a23 in perf_session__deliver_event util/session.c:1590 Rust-for-Linux#11 0x55defe72951e in ordered_events__deliver_event util/session.c:183 Rust-for-Linux#12 0x55defe740082 in do_flush util/ordered-events.c:244 Rust-for-Linux#13 0x55defe7407cb in __ordered_events__flush util/ordered-events.c:323 Rust-for-Linux#14 0x55defe740a61 in ordered_events__flush util/ordered-events.c:341 Rust-for-Linux#15 0x55defe73837f in __perf_session__process_events util/session.c:2390 Rust-for-Linux#16 0x55defe7385ff in perf_session__process_events util/session.c:2420 ... Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20211112035124.94327-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar <suresh2514@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

There is only one "goto done;" in set_device_flags() and this happens *before* hci_dev_lock() is called, move the done label to after the hci_dev_unlock() to fix the following unlock balance: [ 31.493567] ===================================== [ 31.493571] WARNING: bad unlock balance detected! [ 31.493576] 5.17.0-rc2+ #13 Tainted: G C E [ 31.493581] ------------------------------------- [ 31.493584] bluetoothd/685 is trying to release lock (&hdev->lock) at: [ 31.493594] [<ffffffffc07603f5>] set_device_flags+0x65/0x1f0 [bluetooth] [ 31.493684] but there are no more locks to release! Note this bug has been around for a couple of years, but before commit fe92ee6 ("Bluetooth: hci_core: Rework hci_conn_params flags") supported_flags was hardcoded to "((1U << HCI_CONN_FLAG_MAX) - 1)" so the check for unsupported flags which does the "goto done;" never triggered. Fixes: fe92ee6 ("Bluetooth: hci_core: Rework hci_conn_params flags") Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

When CONFIG_DEBUG_KMAP_LOCAL is enabled __kmap_local_sched_{in,out} check that even slots in the tsk->kmap_ctrl.pteval are unmapped. The slots are initialized with 0 value, but the check is done with pte_none. 0 pte however does not necessarily mean that pte_none will return true. e.g. on xtensa it returns false, resulting in the following runtime warnings: WARNING: CPU: 0 PID: 101 at mm/highmem.c:627 __kmap_local_sched_out+0x51/0x108 CPU: 0 PID: 101 Comm: touch Not tainted 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13 Call Trace: dump_stack+0xc/0x40 __warn+0x8f/0x174 warn_slowpath_fmt+0x48/0xac __kmap_local_sched_out+0x51/0x108 __schedule+0x71a/0x9c4 preempt_schedule_irq+0xa0/0xe0 common_exception_return+0x5c/0x93 do_wp_page+0x30e/0x330 handle_mm_fault+0xa70/0xc3c do_page_fault+0x1d8/0x3c4 common_exception+0x7f/0x7f WARNING: CPU: 0 PID: 101 at mm/highmem.c:664 __kmap_local_sched_in+0x50/0xe0 CPU: 0 PID: 101 Comm: touch Tainted: G W 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13 Call Trace: dump_stack+0xc/0x40 __warn+0x8f/0x174 warn_slowpath_fmt+0x48/0xac __kmap_local_sched_in+0x50/0xe0 finish_task_switch$isra$0+0x1ce/0x2f8 __schedule+0x86e/0x9c4 preempt_schedule_irq+0xa0/0xe0 common_exception_return+0x5c/0x93 do_wp_page+0x30e/0x330 handle_mm_fault+0xa70/0xc3c do_page_fault+0x1d8/0x3c4 common_exception+0x7f/0x7f Fix it by replacing !pte_none(pteval) with pte_val(pteval) != 0. Link: https://lkml.kernel.org/r/20220403235159.3498065-1-jcmvbkbc@gmail.com Fixes: 5fbda3e ("sched: highmem: Store local kmaps in task struct") Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use the actual length of volume coherency data when setting the xattr to avoid the following KASAN report. BUG: KASAN: slab-out-of-bounds in cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles] Write of size 4 at addr ffff888101e02af4 by task kworker/6:0/1347 CPU: 6 PID: 1347 Comm: kworker/6:0 Kdump: loaded Not tainted 5.18.0-rc1-nfs-fscache-netfs+ #13 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-4.fc34 04/01/2014 Workqueue: events fscache_create_volume_work [fscache] Call Trace: <TASK> dump_stack_lvl+0x45/0x5a print_report.cold+0x5e/0x5db ? __lock_text_start+0x8/0x8 ? cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles] kasan_report+0xab/0x120 ? cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles] kasan_check_range+0xf5/0x1d0 memcpy+0x39/0x60 cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles] cachefiles_acquire_volume+0x2be/0x500 [cachefiles] ? __cachefiles_free_volume+0x90/0x90 [cachefiles] fscache_create_volume_work+0x68/0x160 [fscache] process_one_work+0x3b7/0x6a0 worker_thread+0x2c4/0x650 ? process_one_work+0x6a0/0x6a0 kthread+0x16c/0x1a0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> Allocated by task 1347: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 cachefiles_set_volume_xattr+0x76/0x350 [cachefiles] cachefiles_acquire_volume+0x2be/0x500 [cachefiles] fscache_create_volume_work+0x68/0x160 [fscache] process_one_work+0x3b7/0x6a0 worker_thread+0x2c4/0x650 kthread+0x16c/0x1a0 ret_from_fork+0x22/0x30 The buggy address belongs to the object at ffff888101e02af0 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 4 bytes inside of 8-byte region [ffff888101e02af0, ffff888101e02af8) The buggy address belongs to the physical page: page:00000000a2292d70 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x101e02 flags: 0x17ffffc0000200(slab|node=0|zone=2|lastcpupid=0x1fffff) raw: 0017ffffc0000200 0000000000000000 dead000000000001 ffff888100042280 raw: 0000000000000000 0000000080660066 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888101e02980: fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc ffff888101e02a00: 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00 >ffff888101e02a80: fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 04 fc ^ ffff888101e02b00: fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc ffff888101e02b80: fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc ================================================================== Fixes: 413a4a6 "cachefiles: Fix volume coherency attribute" Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/20220405134649.6579-1-dwysocha@redhat.com/ # v1 Link: https://lore.kernel.org/r/20220405142810.8208-1-dwysocha@redhat.com/ # Incorrect v2

Sometimes it is necessary to use a PLT entry to call an ftrace trampoline. This is handled by ftrace_make_call() and ftrace_make_nop(), with each having *almost* identical logic, but this is not handled by ftrace_modify_call() since its introduction in commit: 3b23e49 ("arm64: implement ftrace with regs") Due to this, if we ever were to call ftrace_modify_call() for a callsite which requires a PLT entry for a trampoline, then either: a) If the old addr requires a trampoline, ftrace_modify_call() will use an out-of-range address to generate the 'old' branch instruction. This will result in warnings from aarch64_insn_gen_branch_imm() and ftrace_modify_code(), and no instructions will be modified. As ftrace_modify_call() will return an error, this will result in subsequent internal ftrace errors. b) If the old addr does not require a trampoline, but the new addr does, ftrace_modify_call() will use an out-of-range address to generate the 'new' branch instruction. This will result in warnings from aarch64_insn_gen_branch_imm(), and ftrace_modify_code() will replace the 'old' branch with a BRK. This will result in a kernel panic when this BRK is later executed. Practically speaking, case (a) is vastly more likely than case (b), and typically this will result in internal ftrace errors that don't necessarily affect the rest of the system. This can be demonstrated with an out-of-tree test module which triggers ftrace_modify_call(), e.g. | # insmod test_ftrace.ko | test_ftrace: Function test_function raw=0xffffb3749399201c, callsite=0xffffb37493992024 | branch_imm_common: offset out of range | branch_imm_common: offset out of range | ------------[ ftrace bug ]------------ | ftrace failed to modify | [<ffffb37493992024>] test_function+0x8/0x38 [test_ftrace] | actual: 1d:00:00:94 | Updating ftrace call site to call a different ftrace function | ftrace record flags: e0000002 | (2) R | expected tramp: ffffb374ae42ed54 | ------------[ cut here ]------------ | WARNING: CPU: 0 PID: 165 at kernel/trace/ftrace.c:2085 ftrace_bug+0x280/0x2b0 | Modules linked in: test_ftrace(+) | CPU: 0 PID: 165 Comm: insmod Not tainted 5.19.0-rc2-00002-g4d9ead8b45ce #13 | Hardware name: linux,dummy-virt (DT) | pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : ftrace_bug+0x280/0x2b0 | lr : ftrace_bug+0x280/0x2b0 | sp : ffff80000839ba00 | x29: ffff80000839ba00 x28: 0000000000000000 x27: ffff80000839bcf0 | x26: ffffb37493994180 x25: ffffb374b0991c28 x24: ffffb374b0d70000 | x23: 00000000ffffffea x22: ffffb374afcc33b0 x21: ffffb374b08f9cc8 | x20: ffff572b8462c000 x19: ffffb374b08f9000 x18: ffffffffffffffff | x17: 6c6c6163202c6331 x16: ffffb374ae5ad110 x15: ffffb374b0d51ee4 | x14: 0000000000000000 x13: 3435646532346561 x12: 3437336266666666 | x11: 203a706d61727420 x10: 6465746365707865 x9 : ffffb374ae5149e8 | x8 : 336266666666203a x7 : 706d617274206465 x6 : 00000000fffff167 | x5 : ffff572bffbc4a08 x4 : 00000000fffff167 x3 : 0000000000000000 | x2 : 0000000000000000 x1 : ffff572b84461e00 x0 : 0000000000000022 | Call trace: | ftrace_bug+0x280/0x2b0 | ftrace_replace_code+0x98/0xa0 | ftrace_modify_all_code+0xe0/0x144 | arch_ftrace_update_code+0x14/0x20 | ftrace_startup+0xf8/0x1b0 | register_ftrace_function+0x38/0x90 | test_ftrace_init+0xd0/0x1000 [test_ftrace] | do_one_initcall+0x50/0x2b0 | do_init_module+0x50/0x1f0 | load_module+0x17c8/0x1d64 | __do_sys_finit_module+0xa8/0x100 | __arm64_sys_finit_module+0x2c/0x3c | invoke_syscall+0x50/0x120 | el0_svc_common.constprop.0+0xdc/0x100 | do_el0_svc+0x3c/0xd0 | el0_svc+0x34/0xb0 | el0t_64_sync_handler+0xbc/0x140 | el0t_64_sync+0x18c/0x190 | ---[ end trace 0000000000000000 ]--- We can solve this by consistently determining whether to use a PLT entry for an address. Note that since (the earlier) commit: f1a54ae ("arm64: module/ftrace: intialize PLT at load time") ... we can consistently determine the PLT address that a given callsite will use, and therefore ftrace_make_nop() does not need to skip validation when a PLT is in use. This patch factors the existing logic out of ftrace_make_call() and ftrace_make_nop() into a common ftrace_find_callable_addr() helper function, which is used by ftrace_make_call(), ftrace_make_nop(), and ftrace_modify_call(). In ftrace_make_nop() the patching is consistently validated by ftrace_modify_code() as we can always determine what the old instruction should have been. Fixes: 3b23e49 ("arm64: implement ftrace with regs") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Will Deacon <will@kernel.org> Tested-by: "Ivan T. Ivanov" <iivanov@suse.de> Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20220614080944.1349146-3-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

t8103: - WLAN (SMC PMU GPIO Rust-for-Linux#13) t600x: - WLAN (SMC PMU GPIO Rust-for-Linux#13) - SD (SMC PMU GPIO Rust-for-Linux#26) Signed-off-by: Hector Martin <marcan@marcan.st>

While setting up a new lab, I accidentally misconfigured the Ethernet port for a system that tried an NFS mount using RoCE. This made the NFS server unreachable. The following WARNING popped on the NFS client while waiting for the mount attempt to time out: kernel: workqueue: WQ_MEM_RECLAIM xprtiod:xprt_rdma_connect_worker [rpcrdma] is flushing !WQ_MEM_RECLAI> kernel: WARNING: CPU: 0 PID: 100 at kernel/workqueue.c:2628 check_flush_dependency+0xbf/0xca kernel: Modules linked in: rpcsec_gss_krb5 nfsv4 dns_resolver nfs 8021q garp stp mrp llc rfkill rpcrdma> kernel: CPU: 0 PID: 100 Comm: kworker/u8:8 Not tainted 6.0.0-rc1-00002-g6229f8c054e5 Rust-for-Linux#13 kernel: Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.0b 06/12/2017 kernel: Workqueue: xprtiod xprt_rdma_connect_worker [rpcrdma] kernel: RIP: 0010:check_flush_dependency+0xbf/0xca kernel: Code: 75 2a 48 8b 55 18 48 8d 8b b0 00 00 00 4d 89 e0 48 81 c6 b0 00 00 00 48 c7 c7 65 33 2e be> kernel: RSP: 0018:ffffb562806cfcf8 EFLAGS: 00010092 kernel: RAX: 0000000000000082 RBX: ffff97894f8c3c00 RCX: 0000000000000027 kernel: RDX: 0000000000000002 RSI: ffffffffbe3447d1 RDI: 00000000ffffffff kernel: RBP: ffff978941315840 R08: 0000000000000000 R09: 0000000000000000 kernel: R10: 00000000000008b0 R11: 0000000000000001 R12: ffffffffc0ce3731 kernel: R13: ffff978950c00500 R14: ffff97894341f0c0 R15: ffff978951112eb0 kernel: FS: 0000000000000000(0000) GS:ffff97987fc00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 00007f807535eae8 CR3: 000000010b8e4002 CR4: 00000000003706f0 kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 kernel: Call Trace: kernel: <TASK> kernel: __flush_work.isra.0+0xaf/0x188 kernel: ? _raw_spin_lock_irqsave+0x2c/0x37 kernel: ? lock_timer_base+0x38/0x5f kernel: __cancel_work_timer+0xea/0x13d kernel: ? preempt_latency_start+0x2b/0x46 kernel: rdma_addr_cancel+0x70/0x81 [ib_core] kernel: _destroy_id+0x1a/0x246 [rdma_cm] kernel: rpcrdma_xprt_connect+0x115/0x5ae [rpcrdma] kernel: ? _raw_spin_unlock+0x14/0x29 kernel: ? raw_spin_rq_unlock_irq+0x5/0x10 kernel: ? finish_task_switch.isra.0+0x171/0x249 kernel: xprt_rdma_connect_worker+0x3b/0xc7 [rpcrdma] kernel: process_one_work+0x1d8/0x2d4 kernel: worker_thread+0x18b/0x24f kernel: ? rescuer_thread+0x280/0x280 kernel: kthread+0xf4/0xfc kernel: ? kthread_complete_and_exit+0x1b/0x1b kernel: ret_from_fork+0x22/0x30 kernel: </TASK> SUNRPC's xprtiod workqueue is WQ_MEM_RECLAIM, so any workqueue that one of its work items tries to cancel has to be WQ_MEM_RECLAIM to prevent a priority inversion. The internal workqueues in the RDMA/core are currently non-MEM_RECLAIM. Jason Gunthorpe says this about the current state of RDMA/core: > If you attempt to do a reconnection/etc from within a RECLAIM > context it will deadlock on one of the many allocations that are > made to support opening the connection. > > The general idea of reclaim is that the entire task context > working under the reclaim is marked with an override of the gfp > flags to make all allocations under that call chain reclaim safe. > > But rdmacm does allocations outside this, eg in the WQs processing > the CM packets. So this doesn't work and we will deadlock. > > Fixing it is a big deal and needs more than poking WQ_MEM_RECLAIM > here and there. So we will change the ULP in this case to avoid the use of WQ_MEM_RECLAIM where possible. Deadlocks that were possible before are not fixed, but at least we no longer have a false sense of confidence that the stack won't allocate memory during memory reclaim. Suggested-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Poll CQ functions shouldn't sleep as they are called in atomic context. The following splat appears once the mlx5_aso_poll_cq() is used in such flow. BUG: scheduling while atomic: swapper/17/0/0x00000100 Modules linked in: sch_ingress openvswitch nsh mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core fuse [last unloaded: mlx5_core] CPU: 17 PID: 0 Comm: swapper/17 Tainted: G W 6.0.0-rc2+ Rust-for-Linux#13 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x34/0x44 __schedule_bug.cold+0x47/0x53 __schedule+0x4b6/0x670 ? hrtimer_start_range_ns+0x28d/0x360 schedule+0x50/0x90 schedule_hrtimeout_range_clock+0x98/0x120 ? __hrtimer_init+0xb0/0xb0 usleep_range_state+0x60/0x90 mlx5_aso_poll_cq+0xad/0x190 [mlx5_core] mlx5e_ipsec_aso_update_curlft+0x81/0xb0 [mlx5_core] xfrm_timer_handler+0x6b/0x360 ? xfrm_find_acq_byseq+0x50/0x50 __hrtimer_run_queues+0x139/0x290 hrtimer_run_softirq+0x7d/0xe0 __do_softirq+0xc7/0x272 irq_exit_rcu+0x87/0xb0 sysvec_apic_timer_interrupt+0x72/0x90 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x16/0x20 RIP: 0010:default_idle+0x18/0x20 Code: ae 7d ff ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 8b 05 b5 30 0d 01 85 c0 7e 07 0f 00 2d 0a e3 53 00 fb f4 <c3> 0f 1f 80 00 00 00 00 0f 1f 44 00 00 65 48 8b 04 25 80 ad 01 00 RSP: 0018:ffff888100883ee0 EFLAGS: 00000242 RAX: 0000000000000001 RBX: ffff888100849580 RCX: 4000000000000000 RDX: 0000000000000001 RSI: 0000000000000083 RDI: 000000000008863c RBP: 0000000000000011 R08: 00000064e6977fa9 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 default_idle_call+0x37/0xb0 do_idle+0x1cd/0x1e0 cpu_startup_entry+0x19/0x20 start_secondary+0xfe/0x120 secondary_startup_64_no_verify+0xcd/0xdb </TASK> softirq: huh, entered softirq 8 HRTIMER 00000000a97c08cb with preempt_count 00000100, exited with 00000000? Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>

When a system with E810 with existing VFs gets rebooted the following hang may be observed. Pid 1 is hung in iavf_remove(), part of a network driver: PID: 1 TASK: ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow" #0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb #1 [ffffaad04005fae8] schedule at ffffffff8b323e2d #2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc #3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930 #4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf] #5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513 #6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa #7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc #8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e #9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429 #10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4 #11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice] #12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice] #13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice] #14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1 #15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386 #16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870 #17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6 #18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159 #19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc #20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d #21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169 #22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b RIP: 00007f1baa5c13d7 RSP: 00007fffbcc55a98 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1baa5c13d7 RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead RBP: 00007fffbcc55ca0 R8: 0000000000000000 R9: 00007fffbcc54e90 R10: 00007fffbcc55050 R11: 0000000000000202 R12: 0000000000000005 R13: 0000000000000000 R14: 00007fffbcc55af0 R15: 0000000000000000 ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b During reboot all drivers PM shutdown callbacks are invoked. In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE. In ice_shutdown() the call chain above is executed, which at some point calls iavf_remove(). However iavf_remove() expects the VF to be in one of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If that's not the case it sleeps forever. So if iavf_shutdown() gets invoked before iavf_remove() the system will hang indefinitely because the adapter is already in state __IAVF_REMOVE. Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE, as we already went through iavf_shutdown(). Fixes: 9745780 ("iavf: Add waiting so the port is initialized in remove") Fixes: a841733 ("iavf: Fix race condition between iavf_shutdown and iavf_remove") Reported-by: Marius Cornea <mcornea@redhat.com> Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The cited commit holds encap tbl lock unconditionally when setting up dests. But it may cause the following deadlock: PID: 1063722 TASK: ffffa062ca5d0000 CPU: 13 COMMAND: "handler8" #0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91 #1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb #2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528 #3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb #4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb #5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core] #6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core] #7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core] #8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core] #9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core] #10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core] #11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core] #12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core] #13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8 #14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower] #15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower] #16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0 [1031218.028143] wait_for_completion+0x24/0x30 [1031218.028589] mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core] [1031218.029256] mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core] [1031218.029885] process_one_work+0x24e/0x510 Actually no need to hold encap tbl lock if there is no encap action. Fix it by checking if encap action exists or not before holding encap tbl lock. Fixes: 37c3b9f ("net/mlx5e: Prevent encap offload when neigh update is running") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

With latest clang18, I hit test_progs failures for the following test: #13/2 bpf_cookie/multi_kprobe_link_api:FAIL #13/3 bpf_cookie/multi_kprobe_attach_api:FAIL #13 bpf_cookie:FAIL #75 fentry_fexit:FAIL #76/1 fentry_test/fentry:FAIL #76 fentry_test:FAIL #80/1 fexit_test/fexit:FAIL #80 fexit_test:FAIL #110/1 kprobe_multi_test/skel_api:FAIL #110/2 kprobe_multi_test/link_api_addrs:FAIL #110/3 kprobe_multi_test/link_api_syms:FAIL #110/4 kprobe_multi_test/attach_api_pattern:FAIL #110/5 kprobe_multi_test/attach_api_addrs:FAIL #110/6 kprobe_multi_test/attach_api_syms:FAIL #110 kprobe_multi_test:FAIL For example, for #13/2, the error messages are: [...] kprobe_multi_test_run:FAIL:kprobe_test7_result unexpected kprobe_test7_result: actual 0 != expected 1 [...] kprobe_multi_test_run:FAIL:kretprobe_test7_result unexpected kretprobe_test7_result: actual 0 != expected 1 clang17 does not have this issue. Further investigation shows that kernel func bpf_fentry_test7(), used in the above tests, is inlined by the compiler although it is marked as noinline. int noinline bpf_fentry_test7(struct bpf_fentry_test_t *arg) { return (long)arg; } It is known that for simple functions like the above (e.g. just returning a constant or an input argument), the clang compiler may still do inlining for a noinline function. Adding 'asm volatile ("")' in the beginning of the bpf_fentry_test7() can prevent inlining. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/bpf/20230826200843.2210074-1-yonghong.song@linux.dev

The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Currently when rmdir on an instance is done, eventfs_remove_events_dir() is called and it does a dput on the dentry and then frees the eventfs_inode that represents the events directory. But there's no protection against a reader reading the top level events directory at the same time and we can get a use after free error. Instead, use the dput() associated to the dentry to also free the eventfs_inode associated to the events directory, as that will get called when the last reference to the directory is released. This issue triggered the following KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in eventfs_root_lookup+0x88/0x1b0 Read of size 8 at addr ffff888120130ca0 by task ftracetest/1201 CPU: 4 PID: 1201 Comm: ftracetest Not tainted 6.5.0-test-10737-g469e0a8194e7 #13 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x57/0x90 print_report+0xcf/0x670 ? __pfx_ring_buffer_record_off+0x10/0x10 ? _raw_spin_lock_irqsave+0x2b/0x70 ? __virt_addr_valid+0xd9/0x160 kasan_report+0xd4/0x110 ? eventfs_root_lookup+0x88/0x1b0 ? eventfs_root_lookup+0x88/0x1b0 eventfs_root_lookup+0x88/0x1b0 ? eventfs_root_lookup+0x33/0x1b0 __lookup_slow+0x194/0x2a0 ? __pfx___lookup_slow+0x10/0x10 ? down_read+0x11c/0x330 walk_component+0x166/0x220 link_path_walk.part.0.constprop.0+0x3a3/0x5a0 ? seqcount_lockdep_reader_access+0x82/0x90 ? __pfx_link_path_walk.part.0.constprop.0+0x10/0x10 path_openat+0x143/0x11f0 ? __lock_acquire+0xa1a/0x3220 ? __pfx_path_openat+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 do_filp_open+0x166/0x290 ? __pfx_do_filp_open+0x10/0x10 ? lock_is_held_type+0xce/0x120 ? preempt_count_sub+0xb7/0x100 ? _raw_spin_unlock+0x29/0x50 ? alloc_fd+0x1a0/0x320 do_sys_openat2+0x126/0x160 ? rcu_is_watching+0x34/0x60 ? __pfx_do_sys_openat2+0x10/0x10 ? __might_resched+0x2cf/0x3b0 ? __fget_light+0xdf/0x100 __x64_sys_openat+0xcd/0x140 ? __pfx___x64_sys_openat+0x10/0x10 ? syscall_enter_from_user_mode+0x22/0x90 ? lockdep_hardirqs_on+0x7d/0x100 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7f1dceef5e51 Code: 75 57 89 f0 25 00 00 41 00 3d 00 00 41 00 74 49 80 3d 9a 27 0e 00 00 74 6d 89 da 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 93 00 00 00 48 8b 54 24 28 64 48 2b 14 25 RSP: 002b:00007fff2cddf380 EFLAGS: 00000202 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 0000000000000241 RCX: 00007f1dceef5e51 RDX: 0000000000000241 RSI: 000055d7520677d0 RDI: 00000000ffffff9c RBP: 000055d7520677d0 R08: 000000000000001e R09: 0000000000000001 R10: 00000000000001b6 R11: 0000000000000202 R12: 0000000000000000 R13: 0000000000000003 R14: 000055d752035678 R15: 000055d752067788 </TASK> Allocated by task 1200: kasan_save_stack+0x2f/0x50 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x8b/0x90 eventfs_create_events_dir+0x54/0x220 create_event_toplevel_files+0x42/0x130 event_trace_add_tracer+0x33/0x180 trace_array_create_dir+0x52/0xf0 trace_array_create+0x361/0x410 instance_mkdir+0x6b/0xb0 tracefs_syscall_mkdir+0x57/0x80 vfs_mkdir+0x275/0x380 do_mkdirat+0x1da/0x210 __x64_sys_mkdir+0x74/0xa0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Freed by task 1251: kasan_save_stack+0x2f/0x50 kasan_set_track+0x21/0x30 kasan_save_free_info+0x27/0x40 __kasan_slab_free+0x106/0x180 __kmem_cache_free+0x149/0x2e0 event_trace_del_tracer+0xcb/0x120 __remove_instance+0x16a/0x340 instance_rmdir+0x77/0xa0 tracefs_syscall_rmdir+0x77/0xc0 vfs_rmdir+0xed/0x2d0 do_rmdir+0x235/0x280 __x64_sys_rmdir+0x5f/0x90 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 The buggy address belongs to the object at ffff888120130ca0 which belongs to the cache kmalloc-16 of size 16 The buggy address is located 0 bytes inside of freed 16-byte region [ffff888120130ca0, ffff888120130cb0) The buggy address belongs to the physical page: page:000000004dbddbb0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x120130 flags: 0x17ffffc0000800(slab|node=0|zone=2|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 0017ffffc0000800 ffff8881000423c0 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000800080 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888120130b80: 00 00 fc fc 00 05 fc fc 00 00 fc fc 00 02 fc fc ffff888120130c00: 00 07 fc fc 00 00 fc fc 00 00 fc fc fa fb fc fc >ffff888120130c80: 00 00 fc fc fa fb fc fc 00 00 fc fc 00 00 fc fc ^ ffff888120130d00: 00 00 fc fc 00 00 fc fc 00 00 fc fc fa fb fc fc ffff888120130d80: 00 00 fc fc 00 00 fc fc 00 00 fc fc 00 00 fc fc ================================================================== Link: https://lkml.kernel.org/r/20230907024803.250873643@goodmis.org Link: https://lore.kernel.org/all/1cb3aee2-19af-c472-e265-05176fe9bd84@huawei.com/ Cc: Ajay Kaher <akaher@vmware.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: 5bdcd5f eventfs: ("Implement removal of meta data from eventfs") Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Fix an error detected by memory sanitizer: ``` ==4033==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x55fb0fbedfc7 in read_alias_info tools/perf/util/pmu.c:457:6 #1 0x55fb0fbea339 in check_info_data tools/perf/util/pmu.c:1434:2 #2 0x55fb0fbea339 in perf_pmu__check_alias tools/perf/util/pmu.c:1504:9 #3 0x55fb0fbdca85 in parse_events_add_pmu tools/perf/util/parse-events.c:1429:32 #4 0x55fb0f965230 in parse_events_parse tools/perf/util/parse-events.y:299:6 #5 0x55fb0fbdf6b2 in parse_events__scanner tools/perf/util/parse-events.c:1822:8 #6 0x55fb0fbdf8c1 in __parse_events tools/perf/util/parse-events.c:2094:8 #7 0x55fb0fa8ffa9 in parse_events tools/perf/util/parse-events.h:41:9 #8 0x55fb0fa8ffa9 in test_event tools/perf/tests/parse-events.c:2393:8 #9 0x55fb0fa8f458 in test__pmu_events tools/perf/tests/parse-events.c:2551:15 #10 0x55fb0fa6d93f in run_test tools/perf/tests/builtin-test.c:242:9 #11 0x55fb0fa6d93f in test_and_print tools/perf/tests/builtin-test.c:271:8 #12 0x55fb0fa6d082 in __cmd_test tools/perf/tests/builtin-test.c:442:5 #13 0x55fb0fa6d082 in cmd_test tools/perf/tests/builtin-test.c:564:9 #14 0x55fb0f942720 in run_builtin tools/perf/perf.c:322:11 #15 0x55fb0f942486 in handle_internal_command tools/perf/perf.c:375:8 #16 0x55fb0f941dab in run_argv tools/perf/perf.c:419:2 #17 0x55fb0f941dab in main tools/perf/perf.c:535:3 ``` Fixes: 7b723db ("perf pmu: Be lazy about loading event info files from sysfs") Signed-off-by: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20230914022425.1489035-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 #15 [ffff88aa841efb88] device_del at ffffffff82179d23 #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff #20 [ffff88aa841eff10] kthread at ffffffff811d87a0 #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com> Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Andrii Nakryiko says: ==================== BPF register bounds range vs range support This patch set is a continuation of work started in [0]. It adds a big set of manual, auto-generated, and now also random test cases validating BPF verifier's register bounds tracking and deduction logic. First few patches generalize verifier's logic to handle conditional jumps and corresponding range adjustments in case when two non-const registers are compared to each other. Patch #1 generalizes reg_set_min_max() portion, while patch #2 does the same for is_branch_taken() part of the overall solution. Patch #3 improves equality and inequality for cases when BPF program code mixes 64-bit and 32-bit uses of the same register. Depending on specific sequence, it's possible to get to the point where u64/s64 bounds will be very generic (e.g., after signed 32-bit comparison), while we still keep pretty tight u32/s32 bounds. If in such state we proceed with 32-bit equality or inequality comparison, reg_set_min_max() might have to deal with adjusting s32 bounds for two registers that don't overlap, which breaks reg_set_min_max(). This doesn't manifest in <range> vs <const> cases, because if that happens reg_set_min_max() in effect will force s32 bounds to be a new "impossible" constant (from original smin32/smax32 bounds point of view). Things get tricky when we have <range> vs <range> adjustments, so instead of trying to somehow make sense out of such situations, it's best to detect such impossible situations and prune the branch that can't be taken in is_branch_taken() logic. This equality/inequality was the only such category of situations with auto-generated tests added later in the patch set. But when we start mixing arithmetic operations in different numeric domains and conditionals, things get even hairier. So, patch #4 adds sanity checking logic after all ALU/ALU64, JMP/JMP32, and LDX operations. By default, instead of failing verification, we conservatively reset range bounds to unknown values, reporting violation in verifier log (if verbose logs are requested). But to aid development, detection, and debugging, we also introduce a new test flag, BPF_F_TEST_SANITY_STRICT, which triggers verification failure on range sanity violation. Patch #11 sets BPF_F_TEST_SANITY_STRICT by default for test_progs and test_verifier. Patch #12 adds support for controlling this in veristat for testing with production BPF object files. Getting back to BPF verifier, patches #5 and #6 complete verifier's range tracking logic clean up. See respective patches for details. With kernel-side taken care of, we move to testing. We start with building a tester that validates existing <range> vs <scalar> verifier logic for range bounds. Patch #7 implements an initial version of such a tester. We guard millions of generated tests behind SLOW_TESTS=1 envvar requirement, but also have a relatively small number of tricky cases that came up during development and debugging of this work. Those will be executed as part of a normal test_progs run. Patch #8 simulates more nuanced JEQ/JNE logic we added to verifier in patch #3. Patch #9 adds <range> vs <range> "slow tests". Patch #10 is a completely new one, it adds a bunch of randomly generated cases to be run normally, without SLOW_TESTS=1 guard. This should help to get a bunch of cover, and hopefully find some remaining latent problems if verifier proactively as part of normal BPF CI runs. Finally, a tiny test which was, amazingly, an initial motivation for this whole work, is added in lucky patch #13, demonstrating how verifier is now smart enough to track actual number of elements in the array and won't require additional checks on loop iteration variable inside the bpf_for() open-coded iterator loop. [0] https://patchwork.kernel.org/project/netdevbpf/list/?series=798308&state=* v1->v2: - use x < y => y > x property to minimize reg_set_min_max (Eduard); - fix for JEQ/JNE logic in reg_bounds.c (Eduard); - split BPF_JSET and !BPF_JSET cases handling (Shung-Hsi); - adjustments to reg_bounds.c to make it easier to follow (Alexei); - added acks (Eduard, Shung-Hsi). ==================== Link: https://lore.kernel.org/r/20231112010609.848406-1-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Petr Machata says: ==================== mlxsw: Add support for new reset flow Ido Schimmel writes: This patchset changes mlxsw to issue a PCI reset during probe and devlink reload so that the PCI firmware could be upgraded without a reboot. Unlike the old version of this patchset [1], in this version the driver no longer tries to issue a PCI reset by triggering a PCI link toggle on its own, but instead calls the PCI core to issue the reset. The PCI APIs require the device lock to be held which is why patches Patches #7 adds reset method quirk for NVIDIA Spectrum devices. Patch #8 adds a debug level print in PCI core so that device ready delay will be printed even if it is shorter than one second. Patches #9-#11 are straightforward preparations in mlxsw. Patch #12 finally implements the new reset flow in mlxsw. Patch #13 adds PCI reset handlers in mlxsw to avoid user space from resetting the device from underneath an unaware driver. Instead, the driver is gracefully de-initialized before the PCI reset and then initialized again after it. Patch #14 adds a PCI reset selftest to make sure this code path does not regress. [1] https://lore.kernel.org/netdev/cover.1679502371.git.petrm@nvidia.com/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Petr Machata says: ==================== mlxsw: Preparations for support of CFF flood mode PGT is an in-HW table that maps addresses to sets of ports. Then when some HW process needs a set of ports as an argument, instead of embedding the actual set in the dynamic configuration, what gets configured is the address referencing the set. The HW then works with the appropriate PGT entry. Among other allocations, the PGT currently contains two large blocks for bridge flooding: one for 802.1q and one for 802.1d. Within each of these blocks are three tables, for unknown-unicast, multicast and broadcast flooding: . . . | 802.1q | 802.1d | . . . | UC | MC | BC | UC | MC | BC | \______ _____/ \_____ ______/ v v FID flood vectors Thus each FID (which corresponds to an 802.1d bridge or one VLAN in an 802.1q bridge) uses three flood vectors spread across a fairly large region of PGT. This way of organizing the flood table (called "controlled") is not very flexible. E.g. to decrease a bridge scale and store more IP MC vectors, one would need to completely rewrite the bridge PGT blocks, or resort to hacks such as storing individual MC flood vectors into unused part of the bridge table. In order to address these shortcomings, Spectrum-2 and above support what is called CFF flood mode, for Compressed FID Flooding. In CFF flood mode, each FID has a little table of its own, with three entries adjacent to each other, one for unknown-UC, one for MC, one for BC. This allows for a much more fine-grained approach to PGT management, where bits of it are allocated on demand. . . . | FID | FID | FID | FID | FID | . . . |U|M|B|U|M|B|U|M|B|U|M|B|U|M|B| \_____________ _____________/ v FID flood vectors Besides the FID table organization, the CFF flood mode also impacts Router Subport (RSP) table. This table contains flood vectors for rFIDs, which are FIDs that reference front panel ports or LAGs. The RSP table contains two entries per front panel port and LAG, one for unknown-UC traffic, and one for everything else. Currently, the FW allocates and manages the table in its own part of PGT. rFIDs are marked with flood_rsp bit and managed specially. In CFF mode, rFIDs are managed as all other FIDs. The driver therefore has to allocate and maintain the flood vectors. Like with bridge FIDs, this is more work, but increases flexibility of the system. The FW currently supports both the controlled and CFF flood modes. To shed complexity, in the future it should only support CFF flood mode. Hence this patchset, which is the first in series of two to add CFF flood mode support to mlxsw. There are FW versions out there that do not support CFF flood mode, and on Spectrum-1 in particular, there is no plan to support it at all. mlxsw will therefore have to support both controlled flood mode as well as CFF. Another aspect is that at least on Spectrum-1, there are FW versions out there that claim to support CFF flood mode, but then reject or ignore configurations enabling the same. The driver thus has to have a say in whether an attempt to configure CFF flood mode should even be made. Much like with the LAG mode, the feature is therefore expressed in terms of "does the driver prefer CFF flood mode?", and "what flood mode the PCI module managed to configure the FW with". This gives to the driver a chance to determine whether CFF flood mode configuration should be attempted. In this patchset, we lay the ground with new definitions, registers and their fields, and some minor code shaping. The next patchset will be more focused on introducing necessary abstractions and implementation. - Patches #1 and #2 add CFF-related items to the command interface. - Patch #3 adds a new resource, for maximum number of flood profiles supported. (A flood profile is a mapping between traffic type and offset in the per-FID flood vector table.) - Patches #4 to #8 adjust reg.h. The SFFP register is added, which is used for configuring the abovementioned traffic-type-to-offset mapping. The SFMR, register, which serves for FID configuration, is extended with fields specific to CFF mode. And other minor adjustments. - Patches #9 and #10 add the plumbing for CFF mode: a way to request that CFF flood mode be configured, and a way to query the flood mode that was actually configured. - Patch #11 removes dead code. - Patches #12 and #13 add helpers that the next patchset will make use of. Patch #14 moves RIF setup ahead so that FID code can make use of it. ==================== Link: https://lore.kernel.org/r/cover.1700503643.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

With latest upstream llvm18, the following test cases failed: $ ./test_progs -j #13/2 bpf_cookie/multi_kprobe_link_api:FAIL #13/3 bpf_cookie/multi_kprobe_attach_api:FAIL #13 bpf_cookie:FAIL #77 fentry_fexit:FAIL #78/1 fentry_test/fentry:FAIL #78 fentry_test:FAIL #82/1 fexit_test/fexit:FAIL #82 fexit_test:FAIL #112/1 kprobe_multi_test/skel_api:FAIL #112/2 kprobe_multi_test/link_api_addrs:FAIL [...] #112 kprobe_multi_test:FAIL #356/17 test_global_funcs/global_func17:FAIL #356 test_global_funcs:FAIL Further analysis shows llvm upstream patch [1] is responsible for the above failures. For example, for function bpf_fentry_test7() in net/bpf/test_run.c, without [1], the asm code is: 0000000000000400 <bpf_fentry_test7>: 400: f3 0f 1e fa endbr64 404: e8 00 00 00 00 callq 0x409 <bpf_fentry_test7+0x9> 409: 48 89 f8 movq %rdi, %rax 40c: c3 retq 40d: 0f 1f 00 nopl (%rax) ... and with [1], the asm code is: 0000000000005d20 <bpf_fentry_test7.specialized.1>: 5d20: e8 00 00 00 00 callq 0x5d25 <bpf_fentry_test7.specialized.1+0x5> 5d25: c3 retq ... and <bpf_fentry_test7.specialized.1> is called instead of <bpf_fentry_test7> and this caused test failures for #13/#77 etc. except #356. For test case #356/17, with [1] (progs/test_global_func17.c)), the main prog looks like: 0000000000000000 <global_func17>: 0: b4 00 00 00 2a 00 00 00 w0 = 0x2a 1: 95 00 00 00 00 00 00 00 exit ... which passed verification while the test itself expects a verification failure. Let us add 'barrier_var' style asm code in both places to prevent function specialization which caused selftests failure. [1] llvm/llvm-project#72903 Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20231127050342.1945270-1-yonghong.song@linux.dev

Petr Machata says: ==================== mlxsw: Support CFF flood mode The registers to configure to initialize a flood table differ between the controlled and CFF flood modes. In therefore needs to be an op. Add it, hook up the current init to the existing families, and invoke the op. PGT is an in-HW table that maps addresses to sets of ports. Then when some HW process needs a set of ports as an argument, instead of embedding the actual set in the dynamic configuration, what gets configured is the address referencing the set. The HW then works with the appropriate PGT entry. Among other allocations, the PGT currently contains two large blocks for bridge flooding: one for 802.1q and one for 802.1d. Within each of these blocks are three tables, for unknown-unicast, multicast and broadcast flooding: . . . | 802.1q | 802.1d | . . . | UC | MC | BC | UC | MC | BC | \______ _____/ \_____ ______/ v v FID flood vectors Thus each FID (which corresponds to an 802.1d bridge or one VLAN in an 802.1q bridge) uses three flood vectors spread across a fairly large region of PGT. This way of organizing the flood table (called "controlled") is not very flexible. E.g. to decrease a bridge scale and store more IP MC vectors, one would need to completely rewrite the bridge PGT blocks, or resort to hacks such as storing individual MC flood vectors into unused part of the bridge table. In order to address these shortcomings, Spectrum-2 and above support what is called CFF flood mode, for Compressed FID Flooding. In CFF flood mode, each FID has a little table of its own, with three entries adjacent to each other, one for unknown-UC, one for MC, one for BC. This allows for a much more fine-grained approach to PGT management, where bits of it are allocated on demand. . . . | FID | FID | FID | FID | FID | . . . |U|M|B|U|M|B|U|M|B|U|M|B|U|M|B| \_____________ _____________/ v FID flood vectors Besides the FID table organization, the CFF flood mode also impacts Router Subport (RSP) table. This table contains flood vectors for rFIDs, which are FIDs that reference front panel ports or LAGs. The RSP table contains two entries per front panel port and LAG, one for unknown-UC traffic, and one for everything else. Currently, the FW allocates and manages the table in its own part of PGT. rFIDs are marked with flood_rsp bit and managed specially. In CFF mode, rFIDs are managed as all other FIDs. The driver therefore has to allocate and maintain the flood vectors. Like with bridge FIDs, this is more work, but increases flexibility of the system. The FW currently supports both the controlled and CFF flood modes. To shed complexity, in the future it should only support CFF flood mode. Hence this patchset, which adds CFF flood mode support to mlxsw. Since mlxsw needs to maintain both the controlled mode as well as CFF mode support, we will keep the layout as compatible as possible. The bridge tables will stay in the same overall shape, just their inner organization will change from flood mode -> FID to FID -> flood mode. Likewise will RSP be kept as a contiguous block of PGT memory, as was the case when the FW maintained it. - The way FIDs get configured under the CFF flood mode differs from the currently used controlled mode. The simple approach of having several globally visible arrays for spectrum.c to statically choose from no longer works. Patch #1 thus privatizes all FID initialization and finalization logic, and exposes it as ops instead. - Patch #2 renames the ops that are specific to the controlled mode, to make room in the namespace for the CFF variants. Patch #3 extracts a helper to compute flood table base out of mlxsw_sp_fid_flood_table_mid(). - The op fid_setup configured fid_offset, i.e. the number of this FID within its family. For rFIDs in CFF mode, to determine this number, the driver will need to do fallible queries. Thus in patch #4, make the FID setup operation fallible as well. - Flood mode initialization routine differs between the controlled and CFF flood modes. The controlled mode needs to configure flood table layout, which the CFF mode does not need to do. In patch #5, move mlxsw_sp_fid_flood_table_init() up so that the following patch can make use of it. In patch #6, add an op to be invoked per table (if defined). - The current way of determining PGT allocation size depends on the number of FIDs and number of flood tables. RFIDs however have PGT footprint depending not on number of FIDs, but on number of ports and LAGs, because which ports an rFID should flood to does not depend on the FID itself, but on the port or LAG that it references. Therefore in patch #7, add FID family ops for determining PGT allocation size. - As elaborated above, layout of PGT will differ between controlled and CFF flood modes. In CFF mode, it will further differ between rFIDs and other FIDs (as described at previous patch). The way to pack the SFMR register to configure a FID will likewise differ from controlled to CFF. Thus in patches #8 and #9 add FID family ops to determine PGT base address for a FID and to pack SFMR. - Patches #10 and #11 add more bits for RSP support. In patch #10, add a new traffic type enumerator, for non-UC traffic. This is a combination of BC and MC traffic, but the way that mlxsw maps these mnemonic names to actual traffic type configurations requires that we have a new name to describe this class of traffic. Patch #11 then adds hooks necessary for RSP table maintenance. As ports come and go, and join and leave LAGs, it is necessary to update flood vectors that the rFIDs use. These new hooks will make that possible. - Patches #12, #13 and #14 introduce flood profiles. These have been implicit so far, but the way that CFF flood mode works with profile IDs requires that we make them explicit. Thus in patch #12, introduce flood profile objects as a set of flood tables that FID families then refer to. The FID code currently only uses a single flood profile. In patch #13, add a flood profile ID to flood profile objects. In patch #14, when in CFF mode, configure SFFP according to the existing flood profiles (or the one that exists as of that point). - Patches #15 and #16 add code to implement, respectively, bridge FIDs and RSP FIDs in CFF mode. - In patch #17, toggle flood_mode_prefer_cff on Spectrum-2 and above, which makes the newly-added code live. ==================== Link: https://lore.kernel.org/r/cover.1701183891.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <lei.chen@smartx.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>

The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/20240617095543.6971-1-jack@suse.cz Link: https://lkml.kernel.org/r/20240614145243.8837-1-jack@suse.cz Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] Rust-for-Linux#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] Rust-for-Linux#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 Rust-for-Linux#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 Rust-for-Linux#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 Rust-for-Linux#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c Rust-for-Linux#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b Rust-for-Linux#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 Rust-for-Linux#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 Rust-for-Linux#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f Rust-for-Linux#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fix missing removal of mod filesystem

29570ae

Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>

ojeda merged commit 33c80fe into rust Sep 18, 2020

ojeda deleted the fix-removed-fs branch September 18, 2020 18:13

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Fix missing removal of `mod filesystem` #13

Fix missing removal of `mod filesystem` #13

ojeda commented Sep 18, 2020

alex commented Sep 18, 2020

Fix missing removal of mod filesystem #13

Fix missing removal of mod filesystem #13

Conversation

ojeda commented Sep 18, 2020

alex commented Sep 18, 2020

Fix missing removal of `mod filesystem` #13

Fix missing removal of `mod filesystem` #13