ogx360_t4

A port of https://github.com/Ryzee119/ogx360.git, a project to use modern USB game controllers on the original Xbox console to the Teensy4.1.

This has a new USB Host Stack, USB Device Stack and significantly more processing power which opens up alot more possibilities.

Finally, hardly any soldering is required.

Currently can emulate

• Duke Standard Controller
• Official Xbox Memory Unit (XMU)
• Steel Battalion Controller
• DVD Movie Playback IR Dongle

Needed Parts

Qty	Part Description	Link
1	Teensy 4.1	https://www.pjrc.com/store/teensy41.html
1	USB Host Cable	https://www.pjrc.com/store/cable_usb_host_t36.html
1	0.1" Pin Header	https://www.pjrc.com/store/header_24x1.html
1	SD Card	For XMU emulation. Clean format FAT32. I had to use this https://www.sdcard.org/downloads/formatter/ on my old SD cards
1	Xbox to MicroUSB	ChimericSystems or Alibaba (Large MOQ!) or DIY

Duke Controller Emulation: Supported Controllers

• Bluetooth 8bitdo/compatible controllers via the 8BitDo Wireless USB Adapter or Rev 2.
• Wired 8bitdo controllers when they are started in X-input mode.
• Xbox S/X Wired
• Xbox One Wired (Genuine / PDP)
• Xbox 360 Wired
• Xbox 360 Wireless (Via PC USB Receiver)
• PS4 Wired

Xbox Memory Unit Emulation (XMU): Supported Memory Interfaces

• 256kB RAM disk for testing only.
• SD Card installed into the Teensy4.1 SD Card slot.

Steel Battalion Controller Emulation: Supported Interfaces

• Keyboard and Mouse See this file for mapping. Please improve!

DVD Playback IR Dongle

• To play DVDs on a Xbox console, place a file called dvd_rom.bin at the root of a FAT32 formatted SD card then insert it into the Teensy before power up. dvd_rom.bin must be dumped from a genuine IR dongle.
• Input is not yet fully implemented. Currently only Duke and Xbox360 D-Pad is mapped to the IR remote dpad for testing. This is very simple to fix though if needed.

Compile

CLI (Requires python and python-pip)

Configure platformio.ini to enable XMU support or Steel Battation etc.

git clone https://github.com/Ryzee119/ogx360_t4.git --recursive
python -m pip install --upgrade pip
pip install platformio
cd ogx360_t4
# Build standard Duke interface
platformio run -e DUKE

Visual Studio Code

• Download and install Visual Studio Code.
• Install the PlatformIO IDE plugin.
• Clone this repo recursively git clone https://github.com/Ryzee119/ogx360_t4.git --recursive
• In Visual Studio Code File > Open Folder... > ogx360_t4
• Hit build on the Platform IO toolbar (✓).

Program

Teensy (using Teensy Loader)

• Connect the Teensy to your PC using a MicroUSB cable.
• Run the Teensy Loader Application.

Teensy (using Visual Studio Code)

• Setup Visual Studio Code as per the Compile instructions.
• Hit the program button on the Platform IO toolbar (→).