With MSPWIfiBride, flight controllers with MSP protocol can be easily configured wirelessly via Wifi.
- MSP error checking
- Easy to use web configuration
- Station and access point mode
- TCP and UDP support
- OTA updates
- NodeMCU V2/3
- ESP-01(M)
- ESP 12E/f
- ESP32 (Not tested!)
Connect the UART of the ESP module to a UART of the flight controller. Attention: The small ESP8266 modules only tolerate 3.3 V supply voltage. Set the UART of the flight controller to MSP, with the configured baud rate, default is 115200 baud.
After flashing, connect to the network "MSPWifiBridge". Wifi key: 123456789 If there is no automatic forwarding to the configuration page, go to http://192.168.4.1 manually. Standard login data: Username: admin Password: 123456789
Use Visual Studio Code and PlatformIO to compile and flash the code yourself or use the precompiled binary files under releases and use "NodeMCU Flasher" https://github.com/nodemcu/nodemcu-flasher/ For the NodeMCU modules you can simply use the integrated USB port, for the small modules without USB you need a USB/serial converter (FTDI232 or similar). GPIO0 must be pulled to GND during power up to enter bootloader mode.