MQTT-exporter

Description

Simple and generic Prometheus exporter for MQTT. Tested with Mosquitto MQTT and Xiaomi sensors.

It exposes metrics from MQTT message out of the box (you just need to specify the target if not on localhost).

MQTT-exporter expects a topic and a flat JSON payload, the value must be numeric values.

It also provides message counters for each MQTT topic (since PR #5):

mqtt_message_total{instance="mqtt-exporter:9000", job="mqtt-exporter", topic="zigbee2mqtt_0x00157d00032b1234"} 10

Tested devices

Note: This exporter aims to be as generic as possible. If the sensor you use is using the following format, it will work:

topic '<prefix>/<name>', payload '{"temperature":26.24,"humidity":45.37}'

Also, the Shelly format is supported:

topic '<prefix>/<name>/sensor/temperature' '20.00'

The exporter is tested with:

• Aqara/Xiaomi sensors (WSDCGQ11LM and VOCKQJK11LM)
• SONOFF sensors (SNZB-02)
• Shelly sensors (H&T wifi)
• Shelly power sensors (3EM - only with KEEP_FULL_TOPIC enabled)

Metrics conversion example

topic 'zigbee2mqtt/0x00157d00032b1234', payload '{"temperature":26.24,"humidity":45.37}'

will be converted as:

mqtt_temperature{topic="zigbee2mqtt_0x00157d00032b1234"} 25.24
mqtt_humidity{topic="zigbee2mqtt_0x00157d00032b1234"} 45.37

Zigbee2MQTT device availability support

Important notice: legacy availability payload is not supported and must disabled - see Device availability advanced

When exposing device availability, Zigbee2MQTT add /availability suffix in the topic. So we end up with inconsistent metrics:

mqtt_state{topic="zigbee2mqtt_garage_availability"} 1.0
mqtt_temperature{topic="zigbee2mqtt_garage"} 1.0

To avoid having different topic for the same device, the exporter has a normalization feature disabled by default. It can be enabled by setting ZIGBEE2MQTT_AVAILABILITY varenv to "True".

It will remove the suffix from the topic, and change the metric name accordingly:

mqtt_zigbee_availability{topic="zigbee2mqtt_garage"} 1.0
mqtt_temperature{topic="zigbee2mqtt_garage"} 1.0

Note: the metric name mqtt_state is not kept to reduce collision risks as it is too common.

Zwavejs2Mqtt

This exporter also supports Zwavejs2Mqtt metrics, preferably using "named topics" (see official documentation).

To setup this, you need to specify the topic prefix used by Zwavejs2Mqtt in ZWAVE_TOPIC_PREFIX the environment variable (default being "zwave/").

Configuration

Parameters are passed using environment variables.

The list of parameters are:

• KEEP_FULL_TOPIC: Keep entire topic instead of the first two elements only. Usecase: Shelly 3EM (default: False)
• LOG_LEVEL: Logging level (default: INFO)
• LOG_MQTT_MESSAGE: Log MQTT original message, only if LOG_LEVEL is set to DEBUG (default: False)
• MQTT_IGNORED_TOPICS: Comma-separated lists of topics to ignore. Accepts wildcards. (default: None)
• MQTT_ADDRESS: IP or hostname of MQTT broker (default: 127.0.0.1)
• MQTT_PORT: TCP port of MQTT broker (default: 1883)
• MQTT_TOPIC: Topic path to subscribe to (default: #)
• MQTT_KEEPALIVE: Keep alive interval to maintain connection with MQTT broker (default: 60)
• MQTT_USERNAME: Username which should be used to authenticate against the MQTT broker (default: None)
• MQTT_PASSWORD: Password which should be used to authenticate against the MQTT broker (default: None)
• MQTT_V5_PROTOCOL: Force to use MQTT protocol v5 instead of 3.1.1
• MQTT_CLIENT_ID: Set client ID manually for MQTT connection
• MQTT_EXPOSE_CLIENT_ID: Expose the client ID as a label in Prometheus metrics
• PROMETHEUS_PORT: HTTP server PORT to expose Prometheus metrics (default: 9000)
• PROMETHEUS_PREFIX: Prefix added to the metric name, example: mqtt_temperature (default: mqtt_)
• TOPIC_LABEL: Define the Prometheus label for the topic, example temperature{topic="device1"} (default: topic)
• ZIGBEE2MQTT_AVAILABILITY: Normalize sensor name for device availability metric added by Zigbee2MQTT (default: False)
• ZWAVE_TOPIC_PREFIX: MQTT topic used for Zwavejs2Mqtt messages (default: zwave/)

Deployment

Using Docker

With an interactive shell:

docker run -it -p 9000:9000 -e "MQTT_ADDRESS=192.168.0.1" kpetrem/mqtt-exporter

If you need the container to start on system boot (e.g. on your server/Raspberry Pi):

docker run -d -p 9000:9000 --restart unless-stopped --name mqtt-exporter  -e "MQTT_ADDRESS=192.168.0.1" kpetrem/mqtt-exporter

Using Docker Compose

version: "3"
services:
  mqtt-exporter:
    image: kpetrem/mqtt-exporter
    ports:
      - 9000:9000
    environment:
      - MQTT_ADDRESS=192.168.0.1
    restart: unless-stopped

Using Python

pip install -r requirements/base.txt
MQTT_ADDRESS=192.168.0.1 python exporter.py

Get the metrics on Prometheus

See below an example of Prometheus configuration to scrape the metrics:

scrape_configs:
  - job_name: mqtt-exporter
    static_configs:
      - targets: ["mqtt-exporter:9000"]

Nicer metrics

If you want nicer metrics, you can configure mqtt-exporter in your docker-compose.yml as followed:

version: "3"
services:
  mqtt-exporter:
    image: kpetrem/mqtt-exporter
    ports:
      - 9000:9000
    environment:
      - MQTT_ADDRESS=192.168.0.1
      - PROMETHEUS_PREFIX=sensor_
      - TOPIC_LABEL=sensor
    restart: unless-stopped

Result:

sensor_temperature{sensor="zigbee2mqtt_bedroom"} 22.3

And then remove zigbee2mqtt_ prefix from sensor label via Prometheus configuration:

scrape_configs:
  - job_name: mqtt-exporter
    static_configs:
      - targets: ["mqtt-exporter:9000"]
    metric_relabel_configs:
      - source_labels: [sensor]
        regex: 'zigbee2mqtt_(.*)'
        replacement: '$1'
        target_label: sensor

Result:

sensor_temperature{sensor=bedroom"} 22.3

Docker-compose full stack example

This docker-compose aims to share a typical monitoring stack.

If you need persistent metrics, I would advise using Thanos or Cortex. Of course there are other suitable persistent storage solution for Prometheus.

docker-compose.yaml

You can also add other cool software such as Home-Assistant.

Contribute

See CONTRIBUTING.md.