-
Notifications
You must be signed in to change notification settings - Fork 50
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Keep_alive not working #201
Comments
In my case, i relatively fixed this by setting |
I have minimum cycle set but it does not fix the keepalive. I have not made an automation that every minute turns on the shelly. Which essentially "keeps alive" |
Please test the alpha release v2024.6.2-alpha1, if it fixes it I'll make it official. |
It might take a while until I get my hands on another shelly. The one that is on the heater is not easy to be removed/tested since now we have 35+ degrees |
Disconnect the heater, and plug the Shelly on a light (or an ohmmeter if it's a dry contacts relay switch). |
Describe the bug
The thermostat is controlling a shelly device. I have enabled the keep_alive to 1 minute and in the shelly I have the timer off set to 10 minutes. Normally the timer should be reset back to 10 minutes every keep_alive period so every minute in my configuration
To Reproduce
Set the keep_alive to 1 minute and check if it updates the value
Additional context
keep_alive works fine with generic thermostat, it is not woking correctly with dual thermostat
The text was updated successfully, but these errors were encountered: