Note
This project is archived and will not longer be supported. The successor of SeisComP3 is SeisComP which is being continued at https://github.com/seiscomp. The current homepage can be found at https://www.seiscomp.de.

About

Project homepage: http://www.seiscomp3.org

This software has been developed by the GEOFON Program at Helmholtz Centre Potsdam, GFZ German Research Centre for Geosciences and gempa GmbH.

SeisComP3 is distributed under the SeisComP Public License

Note

• The purpose of this repository is to test upcoming features and to integrate community source code and patches
• For production systems only use the official releases from http://www.seiscomp3.org or the corresponding tags in this repository.
• Commercial modules obtained from gempa GmbH are only available for official releases. Binary compatibility of intermediate SeisComP3 versions is not guaranteed.

Compiling

The easiest way to compile SeisComP3 is to use the provided Makefile.cvs which creates the build directory inside the source tree.

$ make -f Makefile.cvs
$ cd build
$ make
$ make install

By default all files are installed under $HOME/seiscomp3. This location can be changed with cmake or with its frontend ccmake.

Basically the build directory can live anywhere. The following steps create a build directory, configure the build and start it:

$ mkdir sc3-build
$ cd sc3-build
$ ccmake /path/to/sc3-src
# Configure with ccmake
$ make
$ make install

Step-by-step instructions

1. Checkout SeisComP3 source code from Github

   sysop@host:~$ git clone https://github.com/SeisComP3/seiscomp3.git sc3-src
   sysop@host:~$ cd sc3-src
   sysop@host:~/sc3-src$
   

2. Change into the desired branch (if not master) or checkout tag

   sysop@host:~/sc3-src$ git checkout release/jakarta/2017.124.02
   

3. Configure the build

   SeisComP3 is using cmake as build environment. For users that are not experienced with cmake it is recommended to use ccmake, an ncurses frontend which is launched by the default Makefile.cvs.

   sysop@host:~/sc3-src$ make -f Makefile.cvs
   

   This will bring up the cmake frontend. Press c to configure the build initially. If cmake is being used, the variables can be passed as command line options:

   sysop@host:~/sc3-src/build$ cmake -DCMAKE_INSTALL_PREFIX=/path/to/install/dir ..
   

   With ccmake some components can be activated and deactivated such as database backends you want to compile support for. The default just enables MySQL. Once done with options, press c again to apply the changes. If everything runs without errors, press g to generate the Makefiles. ccmake will quit if the Makefiles have been generated:

   *** To build the sources change into the 'build' directory and enter make[ install] ***
   sysop@host:~/sc3-src$ cd build
   sysop@host:~/sc3-src/build$ make
   

   If make finished without errors, install SeisComP3 with

   sysop@host:~/sc3-src/build$ make install
   

   All files are then installed under ~/seiscomp3 or under the directory you have specified with CMAKE_INSTALL_PREFIX.

Dependencies

To compile the sources the following development packages are required (Redhat/CentOS package names):

• flex
• libxml2-devel
• boost-devel
• openssl-devel
• ncurses-devel
• mysql-devel
• postgresql-devel (optional)
• python-devel
• m2crypto-devel
• qt4-devel