adding github workflow #2
Sensirion-BotAnnotations
111 errors
|
test_lps22.test_whoami1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_swreset1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_power_down_mode1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_one_shot_measurement1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_status1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_pressure1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_temperature1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_continious_measurement1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_whoami1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_swreset1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_power_down_mode1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_one_shot_measurement1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_status1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_pressure1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_temperature1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_continious_measurement1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_whoami1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_swreset1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_power_down_mode1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_one_shot_measurement1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_status1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_pressure1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_temperature1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_continious_measurement1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test / test (3.8, ubuntu-22.04)
Process completed with exit code 1.
|
|
test_lps22.test_whoami1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_swreset1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_power_down_mode1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_one_shot_measurement1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_status1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_pressure1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_temperature1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_continious_measurement1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test / test (3.11, ubuntu-22.04)
Process completed with exit code 1.
|
|
test / test (3.11, macos-latest)
Process completed with exit code 1.
|
|
test / test (3.9, ubuntu-22.04)
Process completed with exit code 1.
|
|
test_lps22.test_whoami1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_swreset1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_power_down_mode1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_one_shot_measurement1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_status1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_pressure1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_temperature1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_continious_measurement1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_whoami1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_swreset1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_power_down_mode1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_one_shot_measurement1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_status1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_pressure1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_temperature1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_continious_measurement1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test / test (3.10, macos-latest)
[notice] A new release of pip is available: 23.0.1 -> 24.0
[notice] To update, run: python3.10 -m pip install --upgrade pip
|
|
test / test (3.10, macos-latest)
Process completed with exit code 1.
|
|
test / test (3.10, ubuntu-22.04)
Process completed with exit code 1.
|
|
test_lps22.test_whoami1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_swreset1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_power_down_mode1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_one_shot_measurement1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_status1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_pressure1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_temperature1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_continious_measurement1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test / test (3.9, macos-latest)
Process completed with exit code 1.
|
|
test / test (3.9, macos-latest)
[notice] A new release of pip is available: 22.0.4 -> 24.0
[notice] To update, run: python3.9 -m pip install --upgrade pip
|
|
test_lps22.test_whoami1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_swreset1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_power_down_mode1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_one_shot_measurement1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_status1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_pressure1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_temperature1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_continious_measurement1:
tests/test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test / test (3.8, macos-latest)
Process completed with exit code 1.
|
|
test / test (3.8, macos-latest)
[notice] A new release of pip is available: 21.1.1 -> 24.0
[notice] To update, run: python3.8 -m pip install --upgrade pip
|
|
test_lps22.test_whoami1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_swreset1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_power_down_mode1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_one_shot_measurement1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_status1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_pressure1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_temperature1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_continious_measurement1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_whoami1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_swreset1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_power_down_mode1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_one_shot_measurement1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_status1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_pressure1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_temperature1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_continious_measurement1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test / test (3.9, windows-latest)
Process completed with exit code 1.
|
|
test / test (3.10, windows-latest)
Process completed with exit code 1.
|
|
test_lps22.test_whoami1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_swreset1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_power_down_mode1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_one_shot_measurement1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_status1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_pressure1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_temperature1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_continious_measurement1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test / test (3.11, windows-latest)
Process completed with exit code 1.
|
|
test_lps22.test_whoami1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_swreset1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_power_down_mode1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_one_shot_measurement1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_status1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_pressure1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_read_temperature1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test_lps22.test_start_continious_measurement1:
tests\test_lps22.py#L1
failed on setup with "Error evaluating 'skipif': you need to specify reason=STRING when using booleans as conditions."
|
|
test / test (3.8, windows-latest)
Process completed with exit code 1.
|