Creality Ender 3 V3/KE important fixes and some fine-tunings (#3362)

* Fixed retraction speed and added missing parameters. * Fixes for manual filament change * More tunings and fixes. * Fixes and tunings * Formatting * Decrease z-hop for K1 * Updated thumbnails sizes to the same as Creality Print has. (cherry picked from commit 98a9bf6)
SoftFever · Jan 1, 2024 · ef8e4e4 · ef8e4e4
1 parent 2ca195f
commit ef8e4e4
Show file tree

Hide file tree

Showing 12 changed files with 95 additions and 30 deletions.
diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json
@@ -106,16 +106,21 @@
 	"deretraction_speed": [
 		"40"
 	],
-    "z_hop": [
-        "0.1"
-    ],
+	"z_hop": [
+		"0.1"
+	],
 	"single_extruder_multi_material": "1",
+	"manual_filament_change": "1",
 	"change_filament_gcode": "PAUSE",
-	"machine_pause_gcode": "M25",
+	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
 		"Creality Generic PLA @Ender-3V3-all"
 	],
 	"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp  \nG28 ;Home \n \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp  \nG1 X-2.0 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize  \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize  \nG1 X-2.0 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-1.7 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-1.7 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
 	"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z5 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
-	"scan_first_layer": "0"
+	"scan_first_layer": "0",
+	"thumbnails": [
+		"96x96",
+		"300x300"
+	]
 }
diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json
@@ -107,12 +107,17 @@
 		"30"
 	],
 	"single_extruder_multi_material": "1",
+	"manual_filament_change": "1",
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "M25",
 	"default_filament_profile": [
 		"Creality Generic PLA @Ender-3V3-all"
 	],
 	"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \n \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0  ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
 	"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y0 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
-	"scan_first_layer": "0"
+	"scan_first_layer": "0",
+	"thumbnails": [
+		"96x96",
+		"300x300"
+	]
 }
diff --git a/resources/profiles/Creality/machine/Creality K1 (0.4 nozzle).json b/resources/profiles/Creality/machine/Creality K1 (0.4 nozzle).json
@@ -36,13 +36,22 @@
 	"retract_before_wipe": ["70%"],
 	"retraction_length": ["0.5"],
 	"retract_length_toolchange": ["1"],
+	"retraction_speed": ["40"],
 	"deretraction_speed": ["40"],
-	"z_hop": ["0.4"],
+	"extruder_clearance_height_to_lid": "101",
+	"extruder_clearance_height_to_rod": "45",
+	"extruder_clearance_radius": "45",
+	"z_hop": ["0.2"],
 	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
+	"manual_filament_change": "1",
+	"change_filament_gcode": "PAUSE",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": ["Creality Generic PLA"],
 	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
 	"machine_end_gcode": "END_PRINT",
-	"scan_first_layer": "0"
+	"scan_first_layer": "0",
+	"thumbnails": [
+		"96x96",
+		"300x300"
+	]
 }
diff --git a/resources/profiles/Creality/machine/Creality K1 (0.6 nozzle).json b/resources/profiles/Creality/machine/Creality K1 (0.6 nozzle).json
@@ -38,12 +38,20 @@
 	"retract_length_toolchange": ["1"],
 	"retraction_speed": ["40"],
 	"deretraction_speed": ["40"],
-	"z_hop": ["0.4"],
+	"extruder_clearance_height_to_lid": "101",
+	"extruder_clearance_height_to_rod": "45",
+	"extruder_clearance_radius": "45",
+	"z_hop": ["0.2"],
 	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
+	"manual_filament_change": "1",
+	"change_filament_gcode": "PAUSE",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": ["Creality Generic PLA"],
 	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
 	"machine_end_gcode": "END_PRINT",
-	"scan_first_layer": "0"
+	"scan_first_layer": "0",
+	"thumbnails": [
+		"96x96",
+		"300x300"
+	]
 }
diff --git a/resources/profiles/Creality/machine/Creality K1 (0.8 nozzle).json b/resources/profiles/Creality/machine/Creality K1 (0.8 nozzle).json
@@ -36,13 +36,22 @@
 	"retract_before_wipe": ["70%"],
 	"retraction_length": ["0.5"],
 	"retract_length_toolchange": ["1"],
+	"retraction_speed": ["40"],
 	"deretraction_speed": ["40"],
-	"z_hop": ["0.4"],
+	"extruder_clearance_height_to_lid": "101",
+	"extruder_clearance_height_to_rod": "45",
+	"extruder_clearance_radius": "45",
+	"z_hop": ["0.2"],
 	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
+	"manual_filament_change": "1",
+	"change_filament_gcode": "PAUSE",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": ["Creality Generic PLA"],
 	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
 	"machine_end_gcode": "END_PRINT",
-	"scan_first_layer": "0"
+	"scan_first_layer": "0",
+	"thumbnails": [
+		"96x96",
+		"300x300"
+	]
 }
diff --git a/resources/profiles/Creality/machine/Creality K1 Max (0.4 nozzle).json b/resources/profiles/Creality/machine/Creality K1 Max (0.4 nozzle).json
@@ -37,13 +37,22 @@
 	"retract_before_wipe": ["70%"],
 	"retraction_length": ["0.5"],
 	"retract_length_toolchange": ["1"],
+	"retraction_speed": ["40"],
 	"deretraction_speed": ["40"],
-	"z_hop": ["0.4"],
+	"extruder_clearance_height_to_lid": "101",
+	"extruder_clearance_height_to_rod": "45",
+	"extruder_clearance_radius": "45",
+	"z_hop": ["0.2"],
 	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
+	"manual_filament_change": "1",
+	"change_filament_gcode": "PAUSE",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": ["Creality Generic PLA"],
 	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
 	"machine_end_gcode": "END_PRINT",
-	"scan_first_layer": "0"
+	"scan_first_layer": "0",
+	"thumbnails": [
+		"96x96",
+		"300x300"
+	]
 }
diff --git a/resources/profiles/Creality/machine/Creality K1 Max (0.6 nozzle).json b/resources/profiles/Creality/machine/Creality K1 Max (0.6 nozzle).json
@@ -37,13 +37,22 @@
 	"retract_before_wipe": ["70%"],
 	"retraction_length": ["0.5"],
 	"retract_length_toolchange": ["1"],
+	"retraction_speed": ["40"],
 	"deretraction_speed": ["40"],
-	"z_hop": ["0.4"],
+	"extruder_clearance_height_to_lid": "101",
+	"extruder_clearance_height_to_rod": "45",
+	"extruder_clearance_radius": "45",
+	"z_hop": ["0.2"],
 	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
+	"manual_filament_change": "1",
+	"change_filament_gcode": "PAUSE",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": ["Creality Generic PLA"],
 	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
 	"machine_end_gcode": "END_PRINT",
-	"scan_first_layer": "0"
+	"scan_first_layer": "0",
+	"thumbnails": [
+		"96x96",
+		"300x300"
+	]
 }
diff --git a/resources/profiles/Creality/machine/Creality K1 Max (0.8 nozzle).json b/resources/profiles/Creality/machine/Creality K1 Max (0.8 nozzle).json
@@ -37,13 +37,22 @@
 	"retract_before_wipe": ["70%"],
 	"retraction_length": ["0.5"],
 	"retract_length_toolchange": ["1"],
+	"retraction_speed": ["40"],
 	"deretraction_speed": ["40"],
-	"z_hop": ["0.4"],
+	"extruder_clearance_height_to_lid": "101",
+	"extruder_clearance_height_to_rod": "45",
+	"extruder_clearance_radius": "45",
+	"z_hop": ["0.2"],
 	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
+	"manual_filament_change": "1",
+	"change_filament_gcode": "PAUSE",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": ["Creality Generic PLA"],
 	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
 	"machine_end_gcode": "END_PRINT",
-	"scan_first_layer": "0"
+	"scan_first_layer": "0",
+	"thumbnails": [
+		"96x96",
+		"300x300"
+	]
 }
diff --git a/resources/profiles/Creality/machine/fdm_machine_common.json b/resources/profiles/Creality/machine/fdm_machine_common.json
@@ -113,6 +113,8 @@
         "1"
     ],
     "z_hop_types": "Normal Lift",
+    "support_air_filtration": "0",
+    "support_chamber_temp_control": "0",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
     "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",

diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE.json
@@ -14,7 +14,7 @@
 	"bottom_shell_thickness": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "100",
-    "brim_type": "no_brim",
+	"brim_type": "no_brim",
 	"brim_width": "0",
 	"brim_object_gap": "0.1",
 	"compatible_printers_condition": "",
@@ -79,7 +79,7 @@
 	"support_interface_spacing": "0.5",
 	"support_interface_speed": "100%",
 	"support_interface_pattern": "auto",
-	"support_base_pattern": "default",
+	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "50",
 	"support_threshold_angle": "25",

diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE.json
@@ -14,7 +14,7 @@
 	"bottom_shell_thickness": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "100",
-    "brim_type": "no_brim",
+	"brim_type": "no_brim",
 	"brim_width": "0",
 	"brim_object_gap": "0.1",
 	"compatible_printers_condition": "",
@@ -79,7 +79,7 @@
 	"support_interface_spacing": "0.5",
 	"support_interface_speed": "100%",
 	"support_interface_pattern": "auto",
-	"support_base_pattern": "default",
+	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "50",
 	"support_threshold_angle": "25",

diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE.json
@@ -14,7 +14,7 @@
 	"bottom_shell_thickness": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "100",
-    "brim_type": "no_brim",
+	"brim_type": "no_brim",
 	"brim_width": "0",
 	"brim_object_gap": "0.1",
 	"compatible_printers_condition": "",
@@ -79,7 +79,7 @@
 	"support_interface_spacing": "0.5",
 	"support_interface_speed": "100%",
 	"support_interface_pattern": "auto",
-	"support_base_pattern": "default",
+	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "50",
 	"support_threshold_angle": "25",