WIENER MPOD LV Controller

http://github.com/SpiRIT-Collaboration/MPOD_Controller.git

This software is written for the SpiRIT-TPC experiment at RIKEN.

You can freely copy and redistribute this with any modificaiton. Please leave a note about the modification you made and your name and e-mail address before distribution.

Please make sure that the system you are going to use is compatible to this software. Original author does not guarantee proper performances on the other system than that at RIKEN.

Important

This software is WIENER LV module controller. There is iseg HV module controller in the other branch.

How to Use

1. Type snmpwalk -v 2c -m ./WIENER-CRATE-MIB.txt -c public IPADDRESS moduleDescription in command line.
2. Check which module you want to use. (e.g. ma0 and ma1)
3. Change ActiveModules array into the list of modules you want to use in settings.json file. (e.g. ["ma0","ma1"])
4. Change IP address in settings.json file.
5. Type php configure.php to run configure.php file.
6. Modify mapping.json file according to the mapping for the experiment.

Author list

Original Author: Genie Jhang (geniejhang@majimak.com)

Note

2016/03/15 by the original author
Release of two separated versions 2.1lv and 2.1hv.

2015/07/01 by the original author
Initial public release with the version 2.0

Remark

WIENER-CRATE-MIB.txt file is offered by WIENER. (http://www.wiener-d.com)