doc: Improve Programming software - STM32CubeIDE

doc/content/getting-started/programming-software/st-examples/stcubeide/_index.md

@@ -7,10 +7,26 @@ distributions: null
 
 If you are using [STM32CubeIDE](https://www.st.com/en/development-tools/stm32cubeide.html) as your build environment, then using the same tool to program your {{% gnse %}} is convenient.
 
-<!--more-->
+{{< figure src="stm32cubeide.png" alt="stm32 cube ide" >}}
 
-## Steps to reproduce
+## Running Project
 
-1. To program and run or debug {{% gnse %}}, right-click on it and select ***Run As*** or ***Debug As***. When programming, make sure you select **STM32 Cortex-M C/C++ Application** in the **Run As** or **Debug As** section.
+When the [build]({{< ref "/getting-started/se-sw/env-setup/stm32cubeide" >}}) process is done you can flash the binary file to the {{% gnse %}} by running the program from the STM32CubeIDE.
 
-{{< figure src="cubeide.png" alt="cubeide run as" >}}
+Right click on the project name in the **Project Explorer** and select **Run As -> STM32 Cortex-M C/C++ Application**.
+
+{{< figure src="run_as.png" alt="project run as" >}}
+
+This will start to **flash** the compiled program (bin file) to the {{% gnse %}}. The following figure shows the **Console** output, for example, when running the [basic]({{< ref "/applications/se-basic" >}}) project.
+
+{{< figure src="file_download.png" alt="file download" >}}
+
+When the flashing finishes the code will immediately start to run on the {{% gnse %}}. If the program prints text and data to the serial port during the execution they can be displayed on a **Serial Terminal**. The following figure shows the Serial output on [TM Terminal](https://marketplace.eclipse.org/content/tm-terminal), for example, when running the [basic]({{< ref "/applications/se-basic" >}}) project.
+
+{{< figure src="run_capture.png" alt="serial terminal output" >}}
+
+The STLINK-V3SET also supports [Drag-and-drop flash programming]({{< ref "/getting-started/programming-software/st-examples/mounting" >}}) of binary files.
+
+If you want to reset the {{% gnse %}} program that is running, you can press the reset button on the back of the {{% gnse %}} and the current program will start again.
+
+If everything goes well you can remove {{% gnse %}} from the STLINK-V3SET.