Vanilla MacOSX on T430, almost perfectly with Sierra 12.6!

Credits to Rehabman

WORKING =)
    Intel Hyperthread (8 Threads)
    Intel TurboBoost (up to 3.2 Ghz)
    Intel SpeedStep 
    CPU HW Monitor (temps, clock and power) 
    RAM DDR3 at 1600mhz
    Intel HD4000 1536MB
    Brightness (FULL Range + Fn Brightness Keys)
    Display Port Out FullHD + Audio
    Battery Status
    WiFi + Bluetooth (using a rebranded Atheros Ar5b195)
    Ethernet 
    Sleep (with both working sleep leds on/off)
    Display turns on automatically on wake/instant wake	
    USB 3.0 Full Speed
    Audio ALC269 (Everything works, even after sleep)
    Webcam + Mic
    Keyboard+ TouchPad	


NOT WORKING ...
    On Shutdown, need to remove USB 3.0 devices otherwise system will restart (USB 2.0 is ok!)
    SSD Trim (disabled. not recommended for OEM SSD’s on MacOSX) 
    VGA output (apple doesn’t have support)
    SD Card Reader 

NEW! REBRAND A DUAL BAND ATHEROS TO USE ON T430: There is an Atheros ID's signature that passes on T430 whitelist. Follow the steps on my another repository: https://github.com/ThiagoSchetini/AR9285-rebranding

CREATING INSTALLER

-> With Unibeast select Sierra UEFI only without ATI/nVidia (look at tools folder)

-> After creation of USB Installer go to EFI/CLOVER/drivers64UEFI/
    Remove everything and put the 4 files this repository

-> Put all the kexts from 10.12 (or about the version you are trying to make) on other

-> Remove all the kexts folders except other

INSTALL MAC OSX

-> You need a mouse and external keyboard pluged (only for the install process)

-> If stucks on boot disable inject intel graphics

SHOW HIDDEN FILES PLEASE!

-> after first boot, on Terminal:
    defaults write com.apple.finder AppleShowAllFiles YES
	killAll Finder

INSTALL CLOVER (Your EFI Boot)

-> Install “clover.pkg” (look inside tools folder)
    Check Install for UEFI Booting Only
	Check Install Clover in the ESP
	Check Drivers 64 UEFI (IMPORTANT! only OsxAptioFix2Drv-64)

-> Now you can remove your Installer Pen Drive (you have boot)

EFI/CLOVER

-> config.plist: use the one from this repository
    take from low-resolution-config.plist folder for 1366x768 display
	take from high-resolution-config.plist folder for 1600x900 or + display

-> /drivers64UEFI
	use the folder from this repository (with 4 files only!)

-> /kexts
	Remove everything except other (leave it empty)

-> /ACPI/patched:
	(OPTION 1 Hard One - Recommended) Make your own SSDT and DSDT:
		-> First you need the vanilla .aml generated by your UEFI (BIOS)
			Enter in the clover boot menu and press F4 and FN+F4
			That’s all. It’s gonna be on EFI/CLOVER/ACPI/origin

		-> Them disassembly correctly only the DSDT.aml and DSDT’s.aml (0, 1, 2 etc…)
			please, don’t open directly on MacIASL!
			use iasl on terminal (look at tools folder/iasl howTo.txt)
		
		-> patch your DSDT.dsl with all the code from file “…-dsdt-patch.txt” using MacIASL
			it includes only the necessary code to Thinkpad T430
			* choose low resolution for 1366 x 762
			* choose high resolution for 1600 x 900 or +

		-> manually last patch for screen turn on after wake (Warning! It’s a manual change)
			on your .dsl find for “Return (WAKI)”
			On the last two method calls there is:
				\_SB.PCI0.LPC.EC.LED(Zero, 0x80)
					\_SB.PCI0.LPC.EC.LED(0x07, 0x00)
			change for (carefull with identation, must be perfect):
				\_SI._SST (One)
    				\_GPE._L1D ()
		
		-> Save from MacIASL as binary (.aml) and paste on ACPI/patched inside clover UEFI

		-> Generate your own SSDT (Power Management for your processor)
			https://www.tonymacx86.com/threads/quick-guide-to-generate-a-ssdt-for-cpu-power-management.177456/
		-> Put the SSDT.aml on the same folder of DSDT: ACPI/patched inside clover UEFI
		

	(OPTION 2 Easy One - Not recommended) take my patched files .aml:
 		->take ONLY the .aml files from “pached ACPI dsl’s” folder 
			* choose only one SSDT.aml: “i5 3230M” or “i7 3632QM”
			* if you have another processor make your own SSDT or leave it empty

		-> Put the .aml files on the folder: ACPI/patched inside clover UEFI

KEXTS

-> Make a beckup of AppleBacklight.kext (Brightness)
	Why? for future updates you need to reinstall the original and then reinstall the pached

	** Warning!, the backlight kext inside kexts folder is patched for T430 brightness full range control

-> Now, install all the kexts from the folder using “Kext Utility.app” (look inside tools folder)

VOODOO EXTRA FILES (for Keyboard)

-> enter inside voodoo's' folder with the terminal
	sudo cp org.rehabman.voodoo.driver.Daemon.plist /Library/LaunchDaemons
	sudo cp VoodooPS2Daemon /usr/bin

NOW, RESTART AND GET AUDIO WORKING

-> after restart you need to flush the kexts:
	sudo touch /System/Library/Extensions && sudo kextcache -u /
-> restart again to see the audio working!

NO AUDIO YET?

-> sudo touch /System/Library/Extensions && sudo kextcache -u /
-> Restart Again!
* If you have problems, try to disable the option No Cache on config.plist and restart again.	

HWMONITOR

-> Put the HWMONITOR from tools folder on applications and open it, you should read power, clock, and temps of your CPU

NO HIBERNATE AT ALL

-> Disable Hibernation and related options
    sudo pmset -a hibernatemode 0
    sudo rm /var/vm/sleepimage
    sudo mkdir /var/vm/sleepimage
    sudo pmset -a standby 0
    sudo pmset -a autopoweroff 0

ABOUT THIS DSDT CODE

-> basically I modified some original patches from Rehabman:

		[modified] Lenovo X220 
			-> added T430 sleep leds
			-> cleaned extra code

		[modified] Brightness fix (HD3000/HD4000)
			-> included FN brightness keys (T430 only) 

		[usb] USB3_PRW 0x0D (instant wake)
			-> to have sleep working (original Rehabman code)

		[audio] Audio Layout 28
			-> to work with the ALC269 kext (original Rehabman code)

		[sys] IRQ Fix
			-> to enable audio (original Rehabman code)

		[igpu] Low Resolution (or High)
			-> to enable HDMI display port audio out

		[manual] Code change on .dsl to turn on screen automatically on wake

COMPLETE KEXT FLUSH (recomended after remove a kext)

-> repair permissions:
    sudo /usr/libexec/repair_packages --repair --standard-pkgs --volume /

-> rebuild kext cache
    sudo rm -r /System/Library/Caches/com.apple.kext.caches
    sudo touch /System/Library/Extensions
    sudo kextcache -update-volume /

-> rebuild cache short form
    sudo touch /System/Library/Extensions && sudo kextcache -u /

GENERATE VANILLA CONFIG.PLIST (if you need)

on /usr/local/bin/clover-genconfig >config.plist
execute and take the xml

AGAIN, HOW TO REBRAND A DUAL BAND ATHEROS TO USE ON T430:

`https://github.com/ThiagoSchetini/AR9285-rebranding`

HOW TO FLASH T430 BIOS (if you want to install an 1300AC WiFi …)

https://github.com/bibanon/Coreboot-ThinkPads/wiki/xx30-BIOS-Whitelist-Removal