Tech Stack

The project utilizes the following technologies:

• Arduino: Microcontroller platform for building digital devices.
• Python: Programming language used for writing the mouse control script.

Libraries

The following libraries are used in this project:

• Arduino Libraries:
  • Wire.h: Used for I2C communication.
  • ADXL335.h: Library for interfacing with the ADXL335 accelerometer.
• Python Libraries:
  • pyautogui: Used for controlling the mouse cursor programmatically.
  • serial: For serial communication between Arduino and Python.

Project Modules

The project is divided into the following modules:

1. Arduino Code (arduino_code.ino):

   • Initializes the ADXL335 accelerometer.
   • Reads accelerometer data.
   • Sends data via serial communication to the Python script.

2. Python Script (mouse_code.py):

   • Reads data from the serial port.
   • Processes the accelerometer data.
   • Uses pyautogui to move the mouse cursor based on the processed data.

Getting Started

To get started with this project, follow these steps:

1. Set up Arduino:

   • Connect the ADXL335 accelerometer to the Arduino.
   • Upload the arduino_code.ino to the Arduino board.

2. Set up Python Environment:

   • Install the required Python libraries: pyautogui and serial.
   • Run the mouse_code.py script to start controlling the mouse.

Usage

After setting up the hardware and software, you can use the accelerometer to control the mouse cursor by tilting the device in different directions.

Contribution

Contributions are welcome! Please fork the repository and submit pull requests for any improvements or bug fixes.

License

This project is licensed under the MIT License.