Examples: Calibrate: rename to put in order in the directory listing

examples/02-Utility/Calibration/CalibrateOutput/CalibrateOutput.ino → examples/02-Utility/Calibration/01-CalibrateOutput/01-CalibrateOutput.ino

@@ -1,5 +1,5 @@
 /*
-  CalibrateOutput
+  01-CalibrateOutput
 
   Created: Chip Audette, OpenAudio, Oct 2024
   Purpose: Generates a sine wave and outputs it to the black headphone jack.  You can
@@ -26,7 +26,7 @@ const int                  audio_block_samples = 128;     //do not make bigger t
 AudioSettings_F32          audio_settings(sample_rate_Hz, audio_block_samples);
 
 // Create the audio objects and then connect them
-Tympan                     myTympan(TympanRev::E,audio_settings); //do TympanRev::D or TympanRev::E or TympanRev::F
+Tympan                     myTympan(TympanRev::F,audio_settings); //do TympanRev::D or TympanRev::E or TympanRev::F
 AudioInputI2S_F32          i2s_in(audio_settings);                //Digital audio input from the ADC...not used in this program
 AudioSynthWaveform_F32     sineWave(audio_settings);              //generate a synthetic sine wave
 AudioOutputI2S_F32         i2s_out(audio_settings);               //Digital audio output to the DAC.  Should always be last.

examples/02-Utility/Calibration/CalibrateAnalogIO/CalibrateAnalogIO.ino → examples/02-Utility/Calibration/03-CalibrateOutputAndInput/03-CalibrateOutputAndInput.ino

@@ -1,5 +1,5 @@
 /*
-  CalibrateAnalogIO
+  CalibrateOutputAndInput
 
   Created: Chip Audette, OpenAudio, Oct 2024
   Purpose: Measure the signal level of the analog input (pink jack).  If you know 
@@ -57,7 +57,7 @@ void setup() {
   //begin the serial comms (for debugging)
   myTympan.beginBothSerial(); delay(500);
   while (!Serial && (millis() < 2000UL)) delay(5); //wait for 2 seconds to see if USB Serial comes up (try not to miss messages!)
-  myTympan.println("CalibrateAnalogIO: Starting setup()...");
+  myTympan.println("CalibrateOutputAndInput: Starting setup()...");
   Serial.println("Sample Rate (Hz): " + String(audio_settings.sample_rate_Hz));
   Serial.println("Audio Block Size (samples): " + String(audio_settings.audio_block_samples));