-
Notifications
You must be signed in to change notification settings - Fork 15
Mac OS Installation Instructions
// If you are not running bash, start bash by typing /bin/bash // Install Homebrew : $ ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
Output: [mymachine:~] myuser% bash
bash-3.2$ ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
==> This script will install:
/usr/local/bin/brew
/usr/local/Library/...
/usr/local/share/man/man1/brew.1
==> The following directories will be made group writable:
/usr/local/.
/usr/local/bin
/usr/local/lib
==> The following directories will have their group set to admin:
/usr/local/bin
Press RETURN to continue or any other key to abort
==> /usr/bin/sudo /bin/chmod g+rwx /usr/local/. /usr/local/bin /usr/local/lib
Password:
==> /usr/bin/sudo /usr/bin/chgrp admin /usr/local/bin
==> /usr/bin/sudo /bin/mkdir /Library/Caches/Homebrew
==> /usr/bin/sudo /bin/chmod g+rwx /Library/Caches/Homebrew
==> Downloading and installing Homebrew...
remote: Counting objects: 234788, done.
remote: Total 234788 (delta 0), reused 0 (delta 0), pack-reused 234788
Receiving objects: 100% (234788/234788), 30.28 MiB | 7.66 MiB/s, done.
Resolving deltas: 100% (176071/176071), done.
From https://github.com/Homebrew/homebrew
- [new branch] master -> origin/master
HEAD is now at 3473a4b lightning: update 2.1.0 bottle.
==> Installation successful!
==> Next steps
Run brew doctor before you install anything
Run brew help to get started
bash-3.2$ brew doctor
Please note that these warnings are just used to help the Homebrew maintainers
with debugging if you file an issue. If everything you use Homebrew for is
working fine: please don't worry and just ignore them. Thanks!
Warning: Unbrewed dylibs were found in /usr/local/lib.
If you didn't put them there on purpose they could cause problems when
building Homebrew formulae, and may need to be deleted.
Unexpected dylibs:
/usr/local/lib/libecomlodr.dylib
bash-3.2$
// Install Python 3 : $ brew install python3
Output:
bash-3.2$ brew install python3
==> Installing dependencies for python3: xz, pkg-config, readline, sqlite
==> Installing python3 dependency: xz
==> Downloading https://homebrew.bintray.com/bottles/xz-5.2.1.yosemite.bottle.ta
######################################################################## 100.0%
==> Pouring xz-5.2.1.yosemite.bottle.tar.gz
?? /usr/local/Cellar/xz/5.2.1: 59 files, 1.7M
==> Installing python3 dependency: pkg-config
==> Downloading https://homebrew.bintray.com/bottles/pkg-config-0.28.yosemite.bo
######################################################################## 100.0%
==> Pouring pkg-config-0.28.yosemite.bottle.2.tar.gz
?? /usr/local/Cellar/pkg-config/0.28: 10 files, 612K
==> Installing python3 dependency: readline
==> Downloading https://homebrew.bintray.com/bottles/readline-6.3.8.yosemite.bot
######################################################################## 100.0%
==> Pouring readline-6.3.8.yosemite.bottle.tar.gz
==> Caveats
This formula is keg-only, which means it was not symlinked into /usr/local.
Mac OS X provides similar software, and installing this software in
parallel can cause all kinds of trouble.
OS X provides the BSD libedit library, which shadows libreadline.
In order to prevent conflicts when programs look for libreadline we are
defaulting this GNU Readline installation to keg-only.
Generally there are no consequences of this for you. If you build your
own software and it requires this formula, you'll need to add to your
build variables:
LDFLAGS: -L/usr/local/opt/readline/lib
CPPFLAGS: -I/usr/local/opt/readline/include
==> Summary
?? /usr/local/Cellar/readline/6.3.8: 40 files, 2.1M
==> Installing python3 dependency: sqlite
==> Downloading https://homebrew.bintray.com/bottles/sqlite-3.8.8.3.yosemite.bot
######################################################################## 100.0%
==> Pouring sqlite-3.8.8.3.yosemite.bottle.tar.gz
==> Caveats
This formula is keg-only, which means it was not symlinked into /usr/local.
Mac OS X already provides this software and installing another version in
parallel can cause all kinds of trouble.
OS X provides an older sqlite3.
Generally there are no consequences of this for you. If you build your
own software and it requires this formula, you'll need to add to your
build variables:
LDFLAGS: -L/usr/local/opt/sqlite/lib
CPPFLAGS: -I/usr/local/opt/sqlite/include
==> Summary
?? /usr/local/Cellar/sqlite/3.8.8.3: 9 files, 2.1M
==> Installing python3 dependency: gdbm
==> Downloading https://homebrew.bintray.com/bottles/gdbm-1.11.yosemite.bottle.2
######################################################################## 100.0%
==> Pouring gdbm-1.11.yosemite.bottle.2.tar.gz
?? /usr/local/Cellar/gdbm/1.11: 17 files, 532K
==> Installing python3 dependency: openssl
==> Downloading https://homebrew.bintray.com/bottles/openssl-1.0.2.yosemite.bott
######################################################################## 100.0%
==> Pouring openssl-1.0.2.yosemite.bottle.tar.gz
==> Caveats
A CA file has been bootstrapped using certificates from the system
keychain. To add additional certificates, place .pem files in
/usr/local/etc/openssl/certs
and run
/usr/local/opt/openssl/bin/c_rehash
This formula is keg-only, which means it was not symlinked into /usr/local.
Mac OS X already provides this software and installing another version in
parallel can cause all kinds of trouble.
Apple has deprecated use of OpenSSL in favor of its own TLS and crypto libraries
Generally there are no consequences of this for you. If you build your
own software and it requires this formula, you'll need to add to your
build variables:
LDFLAGS: -L/usr/local/opt/openssl/lib
CPPFLAGS: -I/usr/local/opt/openssl/include
==> Summary
?? /usr/local/Cellar/openssl/1.0.2: 459 files, 18M
==> Installing python3
==> Downloading https://www.python.org/ftp/python/3.4.3/Python-3.4.3.tar.xz
######################################################################## 100.0%
==> ./configure --prefix=/usr/local/Cellar/python3/3.4.3 --enable-ipv6 --dataroo
==> make
==> make install PYTHONAPPSDIR=/usr/local/Cellar/python3/3.4.3
==> make frameworkinstallextras PYTHONAPPSDIR=/usr/local/Cellar/python3/3.4.3/sh
==> Downloading https://pypi.python.org/packages/source/s/setuptools/setuptools-
######################################################################## 100.0%
==> Downloading https://pypi.python.org/packages/source/p/pip/pip-6.0.8.tar.gz
######################################################################## 100.0%
==> Caveats
Pip has been installed. To update it
pip3 install --upgrade pip
You can install Python packages with
pip3 install
They will install into the site-package directory
/usr/local/lib/python3.4/site-packages
See: https://github.com/Homebrew/homebrew/blob/master/share/doc/homebrew/Homebrew-and-Python.md
.app bundles were installed.
Run brew linkapps python3 to symlink these to /Applications.
==> /usr/local/Cellar/python3/3.4.3/bin/python3 -s setup.py --no-user-cfg instal
==> /usr/local/Cellar/python3/3.4.3/bin/python3 -s setup.py --no-user-cfg instal
==> Summary
?? /usr/local/Cellar/python3/3.4.3: 5899 files, 100M, built in 2.6 minutes
bash-3.2$
// Clone OpenEIS repository : $ git clone "https://github.com/volttron/openeis"
Output:
bash-3.2$ git clone "https://github.com/volttron/openeis"
Cloning into 'openeis'...
remote: Counting objects: 9934, done.
remote: Total 9934 (delta 0), reused 0 (delta 0), pack-reused 9934
Receiving objects: 100% (9934/9934), 12.76 MiB | 7.62 MiB/s, done.
Resolving deltas: 100% (6713/6713), done.
Checking connectivity... done.
bash-3.2$
// Bootstrap OpenEIS (using Python 3) : $ cd openeis :openeis $ python3 bootstrap.py
Output:
bash-3.2$ git clone "https://github.com/volttron/openeis"
Cloning into 'openeis'...
remote: Counting objects: 9934, done.
remote: Total 9934 (delta 0), reused 0 (delta 0), pack-reused 9934
Receiving objects: 100% (9934/9934), 12.76 MiB | 7.62 MiB/s, done.
Resolving deltas: 100% (6713/6713), done.
Checking connectivity... done.
bash-3.2$ cd openeis/
bash-3.2$ python3 bootstrap.py
Ignoring indexes: https://pypi.python.org/simple
Collecting setuptools
Collecting pip
Installing collected packages: pip, setuptools
Successfully installed pip-6.0.8 setuptools-12.0.5
Obtaining file:///Users/myuser/openeis/lib/openeis-ui
Obtaining file:///Users/myuser/openeis
Collecting python-dateutil (from openeis==0.1)
Downloading python_dateutil-2.4.0-py2.py3-none-any.whl (175kB)
100% |################################| 176kB 2.7MB/s
Collecting django<1.7,>=1.6 (from openeis==0.1)
Downloading Django-1.6.10-py2.py3-none-any.whl (6.7MB)
100% |################################| 6.7MB 81kB/s
Collecting django-filter (from openeis==0.1)
Downloading django_filter-0.9.2-py2.py3-none-any.whl
Collecting djangorestframework<2.4,>=2.3 (from openeis==0.1)
Downloading djangorestframework-2.3.14-py2.py3-none-any.whl (298kB)
100% |################################| 299kB 1.7MB/s
Collecting django-rest-swagger<0.2,>=0.1 (from openeis==0.1)
Downloading django-rest-swagger-0.1.14.tar.gz (150kB)
100% |################################| 151kB 2.4MB/s
Collecting jsonschema (from openeis==0.1)
Downloading jsonschema-2.4.0-py2.py3-none-any.whl
Collecting pytest-django (from openeis==0.1)
Downloading pytest_django-2.8.0-py2.py3-none-any.whl
Collecting django-pytest (from openeis==0.1)
Downloading django-pytest-0.2.0.tar.gz
Collecting pytz (from openeis==0.1)
Downloading pytz-2014.10-py2.py3-none-any.whl (477kB)
100% |################################| 479kB 936kB/s
Collecting numpy (from openeis==0.1)
Downloading numpy-1.9.2-cp34-cp34m-macosx_10_6_intel.macosx_10_9_intel.macosx_10_9_x86_64.macosx_10_10_intel.macosx_10_10_x86_64.whl (3.7MB)
100% |################################| 3.7MB 107kB/s
Collecting six>=1.5 (from python-dateutil->openeis==0.1)
Downloading six-1.9.0-py2.py3-none-any.whl
Collecting pytest>=2.5 (from pytest-django->openeis==0.1)
Downloading pytest-2.6.4.tar.gz (512kB)
100% |################################| 516kB 860kB/s
Collecting py>=1.4.25 (from pytest>=2.5->pytest-django->openeis==0.1)
Downloading py-1.4.26.tar.gz (190kB)
100% |################################| 192kB 2.2MB/s
Installing collected packages: py, pytest, six, openeis, numpy, pytz, django-pytest, pytest-django, jsonschema, django-rest-swagger, djangorestframework, django-filter, django, python-dateutil, openeis-ui
Running setup.py install for py
Running setup.py install for pytest
Running setup.py develop for openeis
Running setup.py install for django-pytest
Running setup.py install for django-rest-swagger
Running setup.py develop for openeis-ui
Successfully installed django-1.6.10 django-filter-0.9.2 django-pytest-0.2.0 django-rest-swagger-0.1.14 djangorestframework-2.3.14 jsonschema-2.4.0 numpy-1.9.2 openeis-0.1 openeis-ui py-1.4.26 pytest-2.6.4 pytest-django-2.8.0 python-dateutil-2.4.0 pytz-2014.10 six-1.9.0
bash-3.2$
// Activate virtual environment :openeis $ . env/bin/activate
Output: bash-3.2$ . env/bin/activate
(openeis)bash-3.2$
// Start OpenEIS server (openeis):openeis $ openeis runserver
Output:
(openeis)bash-3.2$ openeis runserver
Validating models...
0 errors found
March 04, 2015 - 14:29:46
Django version 1.6.10, using settings 'openeis.server._settings'
Starting development server at http://127.0.0.1:8000/
Quit the server with CONTROL-C.
// Now start a web browser and connect to http://127.0.0.1:8000/