Appliance, Smartplug, WiFi Relay, EmonEVSE / OpenEVSE EV Charging Station, HeatpumpMonitor demand shaper: Find the best time to run a household load.
The demand shaper module uses a day ahead power availability forecast and user set schedules to determine the best time to run household loads. An example could be charging an electric car, the user enters a desired completion time and charge duration, the demand shaper module then works out the best time to charge the car, generally there will be higher power availability overnight and during sunny midday hours. The demand shaper attempts to avoid running appliances at peak times while ensuring that the appliance has completed the required run period.
Developed as part of the CydYnni EnergyLocal project, see: https://community.openenergymonitor.org/t/cydynni-energylocal-community-hydro-smart-grid-blog-post
9th November 2018: The demand shaper module now supports the use of the UK grid carbon intensity and Octopus Agile forecasts.
- Emoncms
- Emoncms Device module
- MQTT Mosquitto broker and MQTT emoncms setup as per emonSD image
- Redis
Just run our automated emoncms installation script on a target system of choice, see:
https://github.com/openenergymonitor/EmonScripts
The following installation instructions uses the new EmonScripts emoncms symlinked modules directory location: /opt/emoncms/modules.
If you do not already have this directory, start by creating the directory:
sudo mkdir /opt/emoncms
sudo chown pi:pi /opt/emoncms
mkdir /opt/emoncms/modules
Download or git clone the demandshaper repository to your home folder:
cd /opt/emoncms/modules
git clone https://github.com/emoncms/demandshaper.git
Run demandshaper module installation script:
cd demandshaper
./install.sh
Link the 'demandshaper-module' into the emoncms Modules folder:
ln -s /opt/emoncms/modules/demandshaper/demandshaper-module /var/www/emoncms/Modules/demandshaper
Update emoncms database
Setup > Administration > Update database > Update & Check
Add enable_UDP_broadcast setting to emoncms/settings.php to enable automatic WIFI device setup:
$enable_UDP_broadcast = true;
Optional: Enable the periodic UDP broadcast script on the emonbase/emonpi:
crontab -e
* * * * * php /opt/openenergymonitor/emonpi/UDPBroadcast/broadcast.php 2>&1
The module contains custom interfaces for applications such as EV charging where you can drag drop the battery level state of charge to the desired target, the module then calculates the required run time based on the battery size and charger charge rate (hard coded at present, but will be configurable from the interface):
Integrates the ability to control a Mitsubushi EcoDan heatpump with FTC2B controller connected to the OpenEnergyMonitor HeatpumpMonitor. Flow temperature and heating On/Off is settable from the interface.
Submit schedule:
/emoncms/demandshaper/submit?schedule={
"active":1,
"period":3,
"end":16,
"repeat":[1,1,1,1,1,1,1],
"interruptible":0,
"runonce":false,
"basic":0,
"signal":"carbonintensity",
"device":"openevse"
}
Response:
{
"schedule":{
"active":1,
"period":3,
"end":16,
"repeat":[1,1,1,1,1,1,1],
"interruptible":0,
"runonce":false,
"basic":0,
"signal":"carbonintensity",
"device":"openevse",
"timeleft":2982,
"end_timestamp":1544803200,
"periods":[
{"start":[1544799600,15],"end":[1544803200,16]}
],
"probability":[[1544799600000,328,15,1,1],[1544801400000,331,15.5,1,1],[1544803200000,333,16,0,0],[1544805000000,334,16.5,0,0],[1544806800000,334,17,0,0],[1544808600000,334,17.5,0,0],[1544810400000,334,18,0,0],[1544812200000,335,18.5,0,0],[1544814000000,337,19,0,0],[1544815800000,339,19.5,0,0],[1544817600000,343,20,0,0],[1544819400000,347,20.5,0,0],[1544821200000,350,21,0,0],[1544823000000,351,21.5,0,0],[1544824800000,348,22,0,0],[1544826600000,337,22.5,0,0],[1544828400000,318,23,0,0],[1544830200000,295,23.5,0,0],[1544832000000,273,0,0,0],[1544833800000,254,0.5,0,0],[1544835600000,239,1,0,0],[1544837400000,228,1.5,0,0],[1544839200000,223,2,0,0],[1544841000000,221,2.5,0,0],[1544842800000,221,3,0,0],[1544844600000,219,3.5,0,0],[1544846400000,214,4,0,0],[1544848200000,208,4.5,0,0],[1544850000000,200,5,0,0],[1544851800000,191,5.5,0,0],[1544853600000,183,6,0,0],[1544855400000,179,6.5,0,0],[1544857200000,177,7,0,0],[1544859000000,180,7.5,0,0],[1544860800000,185,8,0,0],[1544862600000,192,8.5,0,0],[1544864400000,199,9,0,0],[1544866200000,208,9.5,0,0],[1544868000000,219,10,0,0],[1544869800000,232,10.5,0,0],[1544871600000,244,11,0,0],[1544873400000,253,11.5,0,0],[1544875200000,260,12,0,0],[1544877000000,264,12.5,0,0],[1544878800000,266,13,0,0],[1544880600000,266,13.5,0,0],[1544882400000,266,14,0,0]]
}
}
The remote cache currently run's on emoncms.org to reduce the potential API load on the Octopus and CarbonIntensity servers. The cache provides the following routes:
https://emoncms.org/demandshaper/carbonintensity
https://emoncms.org/demandshaper/octopus?gsp=A
To install and use the cache on your own server. Symlink emoncms-remote module to Modules folder:
ln -s /home/username/demandshaper/emoncms-remote /var/www/emoncms/Modules/demandshaper
Add the cron entry:
0 * * * * php /home/username/demandshaper/emoncms_remote_cache.php >> /var/log/demandshaper-cache.log
Already, MQTT control requires a password, this provides a basic level of security.. To minimise additional risk, be sure to create an admin username and password in emonESP, this will limit access to the device.
