libleak
detects memory leak by hooking memory functions (e.g. malloc
)
by LD_PRELOAD.
There is no need to modify or re-compile the target program, and you can enable/disable the detection during target running.
In fact libleak
can not identify memory leak, while it just takes the
memory as leak if it lives longer than a threshold. The threshold is 60
second by default, but you should set it according to your scenarios.
There is less impact on performance, compared with valgrind
and memleax
.
It prints the full call-stack at suspicious memory leak point, and easier
to use, compared with other similar libraries (e.g. mtrace
).
GPLv2
-
GNU/Linux only by now. But FreeBSD should be OK with some code changing
-
x86_64 is only tested by now. But others should be OK.
$ git clone --recursive https://github.com/WuBingzheng/libleak.git
$ cd libleak
$ make
-
Download or build the shared-object
libleak.so
. -
Run the target program:
$ LD_PRELOAD=/path/of/libleak.so ./a.out
-
Then you will read output in
/tmp/libleak.$pid
in time.
As said above, you should set expire threshold according to your scenarios.
For example, if you are debugging an HTTP server with keepalive, and there are connections last for more than 5 minutes, you should set the threshold to 300 second to cover it. If your program is expected to free every memory in 1 second, you should set the threshold to 2 to get report in time.
The threshold is set by environment variable LEAK_EXPIRE
(in second, default is 60):
$ LD_PRELOAD=/path/of/libleak.so LEAK_EXPIRE=300 ./a.out
Besides, the threshold will be increased if any memory block is freed after
expiration, with LEAK_AUTO_EXPIRE
enabled (default is disabled):
$ LD_PRELOAD=/path/of/libleak.so LEAK_AUTO_EXPIRE=1 ./a.out
libleak
begins the detection at the very beginning of target process running
by default. However you can enable/disable the detection during running by
setting LEAK_PID_CHECK
and LEAK_PID_FILE
:
$ LD_PRELOAD=/path/of/libleak.so LEAK_PID_CHECK=10 ./a.out
LEAK_PID_CHECK
set the interval (in second, default is 0) to check LEAK_PID_FILE
.
LEAK_PID_FILE
(default is /tmp/libleak.enabled
) contains target pids:
one pid each line, no empty line, no comment line.
You can add or delete pids to/from this file during running.
To enable detecting process pid=1234:
$ echo 1234 >> /tmp/libleak.enabled
To disable detecting process pid=1234:
$ sed -i '/1234/d' /tmp/libleak.enabled
If your program uses a shared library that allocates too much memory
which ruins the log file, AND you can make sure that there is no leak in
calling it, LEAK_LIB_BLACKLIST
can be used to disable it.
Library name can be got from ldd $your-program
.
If there are more than one libraries, use ,
to seperate them:
$ LD_PRELOAD=/path/of/libleak.so LEAK_LIB_BLACKLIST=libmysqlclient.so.20.3.8,librdkafka.so.1 ./a.out
Programs always allocate some memory in initial phase and do not free them.
LEAK_AFTER
can be used to skip this. If it's set, libleak
starts to detect after this time (in second):
$ LD_PRELOAD=/path/of/libleak.so LEAK_AFTER=1 ./a.out
libleak
is multi-thread safe.
Log file will be created for each process.
Besides you can choose which processes to be detect by LEAK_PID_FILE
and LEAK_PID_CHECK
said above.
The log file is set by LEAK_LOG_FILE
(default is /tmp/libleak.$pid
).
There is also a statistics report when disabled or target normal termination, either via exit(3) or via return from the main().
After the program running, you can check the output log (e.g. by tail -f /tmp/libleak.$pid
).
The memory blocks that live longer than the threshold will be printed as:
callstack[1] expires. count=1 size=1024/1024 alloc=1 free=0
0x00007fd322bd8220 libleak.so /path/libleak/libleak.c:674 malloc()
0x000000000040084e test /path/test/test.c:30 foo()
0x0000000000400875 test /path/test/test.c:60 bar()
0x0000000000400acb test /path/test/test.c:67 main()
callstack[1]
is the ID of callstack where memory leak happens.
The backtrace is showed only on the first time, while it only prints the ID and counters if expiring again:
callstack[1] expires. count=2 size=1024/2048 alloc=2 free=0
If the expired memory block is freed later, it prints:
callstack[1] frees after expired. live=6 expired=1 free_expired=1
Stop the output when you think there is enough log.
You can stop the output by terminating the target process,
or by by LEAK_PID_FILE
and LEAK_PID_CHECK
temporarily.
After stopping, statistics is printed for the CallStacks with memory leak:
# callstack statistics: (in ascending order)
callstack[1]: may-leak=1 (1024 bytes)
expired=2 (2048 bytes), free_expired=1 (1024 bytes)
alloc=12 (12288 bytes), free=10 (10240 bytes)
freed memory live time: min=1 max=5 average=4
un-freed memory live time: max=13
callstack[4]: may-leak=4 (32 bytes)
expired=4 (32 bytes), free_expired=0 (0 bytes)
alloc=4 (32 bytes), free=0 (0 bytes)
freed memory live time: min=0 max=0 average=0
un-freed memory live time: max=7
The statistics are straight:
may-leak
, equal toexpired - free_expired
,expired
, count of memory blocks that live longer than threshold,free_expired
, count of memory blocks that freed after expiration,alloc
, total count of allocation,free
, total count of free.
The may-leak
may be the most important one. All callstacks are sorted by this in ascending order.
So you should check all callstacks backward.
If a free is totally missed in your program, you should only check the callstacks with free=0
.
Otherwise, if memory leak only happens in some cases, you need to check all callstacks.
When you find some suspicious callstack, go back to find its full backtrace by the ID, and check you code.
libleak
just try to give some help, while some inspiration is still need to find the memory leak finally.
If memory pool is used in your program (e.g. Nginx
), you must try harder to locate the memory leak.
Good luck!