UV Curing Station designed to be used with a SLA / Resin 3D Printer.
- Timer based UV Curing
- LCD / LED for displaying current status
- Default Presets / Schedules
- Inactive Timeout, 30s "Sleep Mode"
- Turntable for even lighting
- Fully reflective surface to allow for faster curing
| Quantity | Item | Link |
|---|---|---|
| 1 | Arduino Nano | Amazon |
| 2' x 6' | Foam Board (Anything Rigid) | Home Depo |
| ~30m (1 roll) | HVAC Foil Tape (Aluminum) | Amazon |
| 5m (1 roll) | 405nm 12v UV LED's | Amazon |
| ~50 (1 pack) | Header Pins | Amazon |
| 2 | N-Channel MOSFET | Amazon |
| 1 | DC-DC 12v -> 5v Converter | Amazon |
| 1 | Breadboard / PCB (Most will work) | Adafruit |
| 3 | 330 ohm resistor | Amazon |
| 2 | 10k ohm resistor | Amazon |
| 1 | RGB 5mm LED | Amazon |
| 5 pcs (1 pack) | 12mm push button | Amazon |
| 1 | 2x16 LCD + IC2 Module | Amazon |
| ~60 | Dupont Wire (Small gage wire) | Amazon |
| ~1m | Wire (For Power Cable) | Amazon |
| 1 | Rotating Platform | Amazon |
| 1 | Enclosure | See /models |
| 1 | Enclosure Panel | See /models |
| 1 | Hinge | see Thingiverse |
| 1 | Handle | see Thingiverse |
Links are shown as examples, not designed to be cost effective.
Parts can be purchased together or reused from existing projects to get this quite cheap. ~$50
