Releases: a1xd/rawaccel
Releases · a1xd/rawaccel
v1.6.1
Changes
- fixed gui crash ("Invalid Chart Range" error)
- improved keyboard accessibility
Downloading & Installation
- download by following the first link, RawAccel_XXX.zip, in the Assets listed below
- extract contents (right-click zip -> Extract All...)
- follow the installation guide
Resources
v1.6.0
Changes
- drops support for Windows 7 - 8.1
- adds different cap modes
- output cap mode: sets cap at given output wrt gain switch
- input cap mode: sets cap at given input speed
- 'both' cap mode: sets cap at point [input, output], where acceleration/scale is ignored
- adds device config menu with options for
- dpi normalization, where both acceleration and sensitivity are normalized to 1000 dpi, effectively changing the input speed unit from counts/ms to in/s
- disabling the standard counter-based input speed adjustment, and instead adjusting by a constant derived from polling rate
- disabling the driver entirely (for selected device)
- changes vertical sensitivity multiplier to Y/X ratio (x: 0.5, y: 0.75 becomes x: 0.5, ratio: 1.5)
- changes power mode
- now cappable (cap was ignored in v1.5), and works with the cap modes listed above
- adds output offset parameter
- removes weight parameter
- breaks json configs
Downloading & Installation
- download by following the first link, RawAccel_XXX.zip, in the Assets listed below
- extract contents (right-click zip -> Extract All...)
- follow the installation guide
Resources
v1.5.1
Changes
fixes regression where setting Lp norm < 2 resulted in an error message
Downloading & Installation
- download by following the first link, RawAccel_XXX.zip, in the Assets listed below
- extract contents (right-click zip -> Extract All...)
- follow the installation guide
Resources
v1.5.0
Changes
- adds "streaming mode" toggle for overlaying charts using Chroma key in OBS
- adds new accel modes: lookup table, jump
- enables anisotropy/weight options in by-component mode
- changes gain cap unit from input speed to gain
- changes accel parameter names
- natural: acceleration -> decay rate
- motivity: acceleration -> growth rate
- removes region-specific number parsing; decimal separator character is always '.'
- removes weight parameter for all accel modes except power
- negative acceleration can still be applied by setting cap or limit in range (0, 1)
- removes sensitivity offset, naturalgain mode, cap/offset options, in favor
of adding a gain/legacy switch, with mode-dependent behavior:- linear/classic
- gain: sets cap style to gain
- legacy: sets cap style to sensitivity/legacy
- natural
- gain: same behavior as the previously named 'naturalgain' mode
- legacy: same behavior as legacy natural mode
- motivity
- gain: same behavior as in v1.4
- legacy: sets sensitivity to the gain of the original function
- linear/classic
- breaks capped power mode - cap is ignored
- breaks json configs
Downloading & Installation
- download by following the first link, RawAccel_XXX.zip, in the Assets listed below
- extract contents (right-click zip -> Extract All...)
- follow the installation guide
Resources
v1.4.4
Changes
bug fixes
Downloading & Installation
- download by following the first link, RawAccel_XXX.zip, in the Assets listed below
- extract contents (right-click zip -> Extract All...)
- follow the installation guide
Resources
v1.4.3
Changes
GUI error handling improvements
Downloading & Installation
- download by following the first link, RawAccel_XXX.zip, in the Assets listed below
- extract contents (right-click zip -> Extract All...)
- follow the installation guide
Resources
v1.4.2
Changes
fix issues with single device only mode
Downloading & Installation
- download by following the first link, RawAccel_XXX.zip, in the Assets listed below
- extract contents (right-click zip -> Extract All...)
- follow the installation guide
Resources
v1.4.1
Changes
GUI bug fixes
Downloading & Installation
- download by following the first link, RawAccel_XXX.zip, in the Assets listed below
- extract contents (right-click zip -> Extract All...)
- follow the installation guide
Resources
v1.4.0
Changes
- Added anisotropy options for whole mode. See the updated guide for more information.
- Graph fidelity increased, especially for slower inputs.
- Added angle snapping (as json-only "secret" option)
- Can select specific device by hardware ID.
- Show custom dialog on bad input
- Many other small tweaks and fixes
Downloading & Installation
- download by following the first link, RawAccel_XXX.zip, in the Assets listed below
- extract contents (right-click zip -> Extract All...)
- follow the installation guide
Resources
v1.3.0
Changes
- gui fixes/improvements
- Windows 7 support (to be dropped by April 2021)
- embedded version info
- added directional multipliers
Downloading & Installation
- download by following the first link, RawAccel_XXX.zip, in the Assets listed below
- extract contents (right-click zip -> Extract All...)
- follow the installation guide