Merge pull request #41 from jposada202020/adding_displayio_example

adding displayio example

docs/examples.rst

@@ -35,3 +35,13 @@ Provides an example on how to use the sensor as an inclinometer
 .. literalinclude:: ../examples/mpu6050_inclinometer.py
     :caption: examples/mpu6050_inclinometer.py
     :linenos:
+
+
+DisplayIO Simpletest
+---------------------
+
+This is a simple test for boards with built-in display.
+
+.. literalinclude:: ../examples/mpu6050_displayio_simpletest.py
+    :caption: examples/mpu6050_displayio_simpletest.py
+    :linenos:

examples/mpu6050_displayio_simpletest.py

@@ -0,0 +1,66 @@
+# SPDX-FileCopyrightText: 2024 Tim Cocks for Adafruit Industries
+# SPDX-FileCopyrightText: 2024 Jose D. Montoya
+#
+# SPDX-License-Identifier: MIT
+
+import time
+import board
+from adafruit_display_text.bitmap_label import Label
+from terminalio import FONT
+from displayio import Group
+import adafruit_mpu6050
+
+# Simple demo of using the built-in display.
+# create a main_group to hold anything we want to show on the display.
+main_group = Group()
+# Initialize I2C bus and sensor.
+i2c = board.I2C()  # uses board.SCL and board.SDA
+mpu = adafruit_mpu6050.MPU6050(i2c)
+
+
+# Create Label(s) to show the readings. If you have a very small
+# display you may need to change to scale=1.
+display_output_acceleration = Label(FONT, text="", scale=1)
+display_output_gyro = Label(FONT, text="", scale=1)
+display_output_temperature = Label(FONT, text="", scale=1)
+
+# place the label(s) in the middle of the screen with anchored positioning
+display_output_acceleration.anchor_point = (0, 0)
+display_output_acceleration.anchored_position = (
+    4,
+    board.DISPLAY.height // 2 - 60,
+)
+display_output_gyro.anchor_point = (0, 0)
+display_output_gyro.anchored_position = (
+    4,
+    board.DISPLAY.height // 2 - 40,
+)
+display_output_temperature.anchor_point = (0, 0)
+display_output_temperature.anchored_position = (
+    4,
+    board.DISPLAY.height // 2 - 20,
+)
+
+
+# add the label(s) to the main_group
+main_group.append(display_output_acceleration)
+main_group.append(display_output_gyro)
+main_group.append(display_output_temperature)
+
+# set the main_group as the root_group of the built-in DISPLAY
+board.DISPLAY.root_group = main_group
+
+# begin main loop
+while True:
+    # update the text of the label(s) to show the sensor readings
+    accx, accy, accz = mpu.acceleration
+    gyro_x, gyro_y, gyro_z = mpu.gyro
+    display_output_acceleration.text = (
+        f"Acc X:{accx:.1f} Y:{accy:.1f} Z:{accz:.1f} m/s^2"
+    )
+    display_output_gyro.text = (
+        f"Gyro X:{gyro_x:.1f} Y:{gyro_y:.1f} Z:{gyro_z:.1f} rad/s"
+    )
+    display_output_temperature.text = f"Temp: {mpu.temperature:.1f} C"
+    # wait for a bit
+    time.sleep(0.5)