This is a split version of the TGR Alice
- Fix square joins on both boards
- Add rotary encoder on left board, bottom left
- Fix upper: remove islands
- Left: Move esc/pgup/pgdown to own chunk and shift up a little
- Both: Round out inner corners
- Add OLED display on right board, top right
- Add pro micro cutout (layer C/D)
- Add audio cutout (layer C/D)
- Add screw holes
| Item | Vendor | Cost |
|---|---|---|
| Case | 3D Printed | - |
| Switches | - | - |
| Keycaps | Amazon | $23.50 |
| Arduino Pro Micro | Amazon | $15.33 |
| TRRS Cable | Amazon | $4.35 |
| TRRS Jacks | Amazon | $1.38 |
| Rotary Encoder | Amazon | $2.95 |
| OLED Display | Amazon | $3.99 |
| Diodes | Amazon | $3.50 |
Total: $50 + Case + Switches
