scripts: qemu-check.sh: update READY_IPC for imx8

Update READY_IPC value based on changes regarding MU reset.
READY_IPC value comes from:
- clear GP pending interrupt #0 and #1 from MU's xSR register;
- enable GP #0 and #1 for Host -> DSP and DSP -> Host
message notification from MU's xCR register;
- now interrupt host to tell it we are done booting
by setting GIRn bit in MU's xCR register.

So, "00 00 00 c0 00 00 04 c0" is the MU's xSR and xCR registers:
xSR: c0000000 and xCR: c0040000

Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>

scripts/qemu-check.sh

@@ -149,7 +149,23 @@ do
 			has_rom=true
 			;;
 		imx8 | imx8x | imx8m)
-			READY_IPC="00 00 00 00 00 00 04 c0"
+		# This READY_IPC value comes from:
+		#
+		#   /* Clear GP pending interrupt #0 and #1 */
+		#   imx_mu_xsr_rmw(IMX_MU_VERSION, IMX_MU_GSR,
+		#           IMX_MU_xSR_GIPn(IMX_MU_VERSION, 0) |
+		#           IMX_MU_xSR_GIPn(IMX_MU_VERSION, 1), 0);
+		#   /* Enable GP #0 and #1 for Host -> DSP and DSP -> Host message notification */
+		#   imx_mu_xcr_rmw(IMX_MU_VERSION, IMX_MU_GIER,
+		#           IMX_MU_xCR_GIEn(IMX_MU_VERSION, 0) |
+		#           IMX_MU_xCR_GIEn(IMX_MU_VERSION, 1), 0);
+		#   /* Now interrupt host to tell it we are done booting */
+		#   imx_mu_xcr_rmw(IMX_MU_VERSION, IMX_MU_GCR,
+		#           IMX_MU_xCR_GIRn(IMX_MU_VERSION, 1), 0);
+		#
+		# So, "00 00 00 c0 00 00 04 c0" is the MU's xSR and xCR registers:
+		#    xSR: c0000000 and xCR: c0040000
+			READY_IPC="00 00 00 c0 00 00 04 c0"
 			SHM_IPC_REG=qemu-bridge-mu-io
 			SHM_MBOX=qemu-bridge-mbox-io
 			;;