Replies: 4 comments 34 replies
-
|
I found out that the inverter has a RS485 dedicated port. So i guess i could connect direct to that instead of the logger? |
Beta Was this translation helpful? Give feedback.
-
|
Use ModbusTCP section and Waveshare IP and port |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
The ModbusTCP support started in version 0.3.0 https://github.com/ed-chemnitz/qmodbus/releases/tag/v0.3.0 |
Beta Was this translation helpful? Give feedback.
-
|
Thanks, i will try that out soon. My inverter has some problem that the installer must fix before i can start messing around. |
Beta Was this translation helpful? Give feedback.
-
|
@dxmone any success? |
Beta Was this translation helpful? Give feedback.
-
|
I got it to work just fine now. I had some wiring issues but now it's
working. Thanks for the help.
Den mån 29 jan. 2024 kl 18:39 skrev alienatedsec ***@***.***>:
… @dxmone <https://github.com/dxmone> any success?
—
Reply to this email directly, view it on GitHub
<#28 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AITHS5KIXQG2VLQZ25QILN3YQ7NERAVCNFSM6AAAAABCABDNLKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DEOBXGYZTE>
.
You are receiving this because you were mentioned.Message ID:
<alienatedsec/solis-ha-modbus-cloud/repo-discussions/28/comments/8287632@
github.com>
|
Beta Was this translation helpful? Give feedback.
-
|
@dxmone This could be useful for @mdeakin99 as per #31 |
Beta Was this translation helpful? Give feedback.
-
|
I wired it as the manual says. And then just connected A to A on the
waveshare and B o B. Then it just worked. After using the settings provided
by alienatedsecs guide.
Den lör 17 feb. 2024 kl 00:22 skrev alienatedsec ***@***.***>:
… @dxmone <https://github.com/dxmone>
How did you wire the S2-WL-ST USB datalogger? Can you share more details?
This could be useful for @mdeakin99 <https://github.com/mdeakin99> as per
#31 <#31>
—
Reply to this email directly, view it on GitHub
<#28 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AITHS5JXES2EGYBAK6N5J43YT7S45AVCNFSM6AAAAABCABDNLKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DIOJXG44TK>
.
You are receiving this because you were mentioned.Message ID:
<alienatedsec/solis-ha-modbus-cloud/repo-discussions/28/comments/8497795@
github.com>
|
Beta Was this translation helpful? Give feedback.
-
|
@dxmone are you saying that the USB pinout on your inverter can be matched with the 4-pin socket from this project? |
Beta Was this translation helpful? Give feedback.
-
|
Sorry i forgot that this question was about the usb device. I found out
that my solis inverter had a dedicated rs485 port so I used that one.
lör 17 feb. 2024 kl. 11:02 skrev alienatedsec ***@***.***>:
… @dxmone <https://github.com/dxmone> are you saying that the USB pinout on
your inverter can be matched with the 4-pin socket from this project?
—
Reply to this email directly, view it on GitHub
<#28 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AITHS5LAU4I7DU43NHB6AM3YUB55BAVCNFSM6AAAAABCABDNLKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DIOJZHEYTI>
.
You are receiving this because you were mentioned.Message ID:
<alienatedsec/solis-ha-modbus-cloud/repo-discussions/28/comments/8499914@
github.com>
|
Beta Was this translation helpful? Give feedback.
-
|
The instructions are very good. I just don't understand them properly. According to the sketch, I need two Waveshares? a client and a server? then do I need an adapter for usb for the datalogger on the client? how do I tell the Waveshare that it is a client or server? Or do they work correctly if I set them up straight away? |
Beta Was this translation helpful? Give feedback.
-
|
@Sabnock2210 Building based on this project requires some technical skills, and if those are not present, some self-learning by reading manuals and following some high-level instructions. Therefore, my recommendation is to start slowly and follow the diagram, search Google and eBay for terms listed in https://github.com/alienatedsec/solis-ha-modbus-cloud?tab=readme-ov-file#devices-and-cost Besides that, consider a bigger box to fit all devices without hassle, as mine seems slightly too small. |
Beta Was this translation helpful? Give feedback.
-
|
I'll order the components and see if it works. I'll get in touch again then. Thank you for the support |
Beta Was this translation helpful? Give feedback.
-
|
The components are there. Unfortunately I can't get the firmware on it, I'm doing something wrong. VirCom says Flash write fail |
Beta Was this translation helpful? Give feedback.
-
|
Hello, |
Beta Was this translation helpful? Give feedback.
-
Hi, i just got my hybrid inverter and it's using a USB connection instead of the old 4 pin. Is it possible to do this solution with that inverster or am i screwed? Model: S6-EH3P10K-H
Beta Was this translation helpful? Give feedback.
All reactions