Lidar Obstacle Detection

We will use the data from Lidar to track multiple cars on the road.

Lidar sensing gives us high resolution data by sending out thousands of laser signals. These lasers bounce off objects, returning to the sensor where we can then determine how far away objects are by timing how long it takes for the signal to return. Also we can tell a little bit about the object that was hit by measuring the intesity of the returned signal. Each laser ray is in the infrared spectrum, and is sent out at many different angles, usually in a 360 degree range. While lidar sensors gives us very high accurate models for the world around us in 3D, they are currently very expensive, upwards of $60,000 for a standard unit.

Installation

Ubuntu

$> sudo apt install libpcl-dev
$> cd ~
$> git clone https://github.com/andikarachman/Lidar-Obstacle-Detection.git
$> cd Lidar-Obstacle-Detection
$> mkdir build && cd build
$> cmake ..
$> make
$> ./environment

Windows

http://www.pointclouds.org/downloads/windows.html

MAC

Install via Homebrew

1. install homebrew
2. update homebrew

   $> brew update

3. add homebrew science tap

   $> brew tap brewsci/science

4. view pcl install options

   $> brew options pcl

5. install PCL

   $> brew install pcl

Prebuilt Binaries via Universal Installer

http://www.pointclouds.org/downloads/macosx.html
NOTE: very old version

Build from Source

PCL Source Github

PCL Mac Compilation Docs