Linux 5.16 compat: don't use XSTATE_XSAVE to save FPU state

Linux 5.16 moved XSTATE_XSAVE and XSTATE_XRESTORE out of our reach,
so add our own XSAVE{,OPT,S} code and use it for Linux 5.16.

Please note that this differs from previous behavior in that it
won't handle exceptions created by XSAVE an XRSTOR. This is sensible
for three reasons.

 - Exceptions during XSAVE and XRSTOR can only occur if the feature
   is not supported or enabled or the memory operand isn't aligned
   on a 64 byte boundary. If this happens something else went
   terribly wrong, and it may be better to stop execution.

 - Previously we just printed a warning and didn't handle the fault,
   this is arguable for the above reason.

 - All other *SAVE instruction also don't handle exceptions, so this
   at least aligns behavior.

Finally add a test to catch such a regression in the future.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes openzfs#13042
Closes openzfs#13059

config/kernel-fpu.m4

@@ -1,9 +1,12 @@
-dnl # 
+dnl #
 dnl # Handle differences in kernel FPU code.
 dnl #
 dnl # Kernel
 dnl # 5.16:	XCR code put into asm/fpu/xcr.h
-dnl # 		HAVE_KERNEL_FPU_XCR_HEADER
+dnl #		HAVE_KERNEL_FPU_XCR_HEADER
+dnl #
+dnl #		XSTATE_XSAVE and XSTATE_XRESTORE aren't accessible any more
+dnl #		HAVE_KERNEL_FPU_XSAVE_INTERNAL
 dnl #
 dnl # 5.0:	Wrappers have been introduced to save/restore the FPU state.
 dnl #		This change was made to the 4.19.38 and 4.14.120 LTS kernels.
@@ -107,6 +110,36 @@ AC_DEFUN([ZFS_AC_KERNEL_SRC_FPU], [
 		struct fxregs_state *fxr __attribute__ ((unused)) = &st->fxsave;
 		struct xregs_state *xr __attribute__ ((unused)) = &st->xsave;
 	])
+
+	ZFS_LINUX_TEST_SRC([fpu_xsave_internal], [
+		#include <linux/sched.h>
+		#if defined(__x86_64) || defined(__x86_64__) || \
+		    defined(__i386) || defined(__i386__)
+		#if !defined(__x86)
+		#define __x86
+		#endif
+		#endif
+
+		#if !defined(__x86)
+		#error Unsupported architecture
+		#endif
+
+		#include <linux/types.h>
+		#ifdef HAVE_KERNEL_FPU_API_HEADER
+		#include <asm/fpu/api.h>
+		#include <asm/fpu/internal.h>
+		#else
+		#include <asm/i387.h>
+		#include <asm/xcr.h>
+		#endif
+
+	],[
+		struct fpu *fpu = &current->thread.fpu;
+		union fpregs_state *st = &fpu->fpstate->regs;
+		struct fregs_state *fr __attribute__ ((unused)) = &st->fsave;
+		struct fxregs_state *fxr __attribute__ ((unused)) = &st->fxsave;
+		struct xregs_state *xr __attribute__ ((unused)) = &st->xsave;
+	])
 ])
 
 AC_DEFUN([ZFS_AC_KERNEL_FPU], [
@@ -139,7 +172,13 @@ AC_DEFUN([ZFS_AC_KERNEL_FPU], [
 				AC_DEFINE(HAVE_KERNEL_FPU_INTERNAL, 1,
 				    [kernel fpu internal])
 			],[
+				ZFS_LINUX_TEST_RESULT([fpu_xsave_internal], [
+				    AC_MSG_RESULT(internal with internal XSAVE)
+				    AC_DEFINE(HAVE_KERNEL_FPU_XSAVE_INTERNAL, 1,
+					[kernel fpu and XSAVE internal])
+			    ],[
 				AC_MSG_RESULT(unavailable)
+			    ])
 			])
 		])
 	])

config/toolchain-simd.m4

@@ -24,6 +24,9 @@ AC_DEFUN([ZFS_AC_CONFIG_ALWAYS_TOOLCHAIN_SIMD], [
 			ZFS_AC_CONFIG_TOOLCHAIN_CAN_BUILD_AES
 			ZFS_AC_CONFIG_TOOLCHAIN_CAN_BUILD_PCLMULQDQ
 			ZFS_AC_CONFIG_TOOLCHAIN_CAN_BUILD_MOVBE
+			ZFS_AC_CONFIG_TOOLCHAIN_CAN_BUILD_XSAVE
+			ZFS_AC_CONFIG_TOOLCHAIN_CAN_BUILD_XSAVEOPT
+			ZFS_AC_CONFIG_TOOLCHAIN_CAN_BUILD_XSAVES
 			;;
 	esac
 ])
@@ -422,3 +425,66 @@ AC_DEFUN([ZFS_AC_CONFIG_TOOLCHAIN_CAN_BUILD_MOVBE], [
 		AC_MSG_RESULT([no])
 	])
 ])
+
+dnl #
+dnl # ZFS_AC_CONFIG_TOOLCHAIN_CAN_BUILD_XSAVE
+dnl #
+AC_DEFUN([ZFS_AC_CONFIG_TOOLCHAIN_CAN_BUILD_XSAVE], [
+	AC_MSG_CHECKING([whether host toolchain supports XSAVE])
+
+	AC_LINK_IFELSE([AC_LANG_SOURCE([
+	[
+		void main()
+		{
+		  char b[4096] __attribute__ ((aligned (64)));
+		  __asm__ __volatile__("xsave %[b]\n" : : [b] "m" (*b) : "memory");
+		}
+	]])], [
+		AC_MSG_RESULT([yes])
+		AC_DEFINE([HAVE_XSAVE], 1, [Define if host toolchain supports XSAVE])
+	], [
+		AC_MSG_RESULT([no])
+	])
+])
+
+dnl #
+dnl # ZFS_AC_CONFIG_TOOLCHAIN_CAN_BUILD_XSAVEOPT
+dnl #
+AC_DEFUN([ZFS_AC_CONFIG_TOOLCHAIN_CAN_BUILD_XSAVEOPT], [
+	AC_MSG_CHECKING([whether host toolchain supports XSAVEOPT])
+
+	AC_LINK_IFELSE([AC_LANG_SOURCE([
+	[
+		void main()
+		{
+		  char b[4096] __attribute__ ((aligned (64)));
+		  __asm__ __volatile__("xsaveopt %[b]\n" : : [b] "m" (*b) : "memory");
+		}
+	]])], [
+		AC_MSG_RESULT([yes])
+		AC_DEFINE([HAVE_XSAVEOPT], 1, [Define if host toolchain supports XSAVEOPT])
+	], [
+		AC_MSG_RESULT([no])
+	])
+])
+
+dnl #
+dnl # ZFS_AC_CONFIG_TOOLCHAIN_CAN_BUILD_XSAVES
+dnl #
+AC_DEFUN([ZFS_AC_CONFIG_TOOLCHAIN_CAN_BUILD_XSAVES], [
+	AC_MSG_CHECKING([whether host toolchain supports XSAVES])
+
+	AC_LINK_IFELSE([AC_LANG_SOURCE([
+	[
+		void main()
+		{
+		  char b[4096] __attribute__ ((aligned (64)));
+		  __asm__ __volatile__("xsaves %[b]\n" : : [b] "m" (*b) : "memory");
+		}
+	]])], [
+		AC_MSG_RESULT([yes])
+		AC_DEFINE([HAVE_XSAVES], 1, [Define if host toolchain supports XSAVES])
+	], [
+		AC_MSG_RESULT([no])
+	])
+])

configure.ac

@@ -383,6 +383,7 @@ AC_CONFIG_FILES([
 	tests/zfs-tests/tests/functional/rootpool/Makefile
 	tests/zfs-tests/tests/functional/rsend/Makefile
 	tests/zfs-tests/tests/functional/scrub_mirror/Makefile
+	tests/zfs-tests/tests/functional/simd/Makefile
 	tests/zfs-tests/tests/functional/slog/Makefile
 	tests/zfs-tests/tests/functional/snapshot/Makefile
 	tests/zfs-tests/tests/functional/snapused/Makefile

include/os/linux/kernel/linux/simd_x86.h

@@ -136,9 +136,27 @@
  * When the kernel_fpu_* symbols are unavailable then provide our own
  * versions which allow the FPU to be safely used.
  */
+#if defined(HAVE_KERNEL_FPU_INTERNAL) || defined(HAVE_KERNEL_FPU_XSAVE_INTERNAL)
+
+#if defined(HAVE_KERNEL_FPU_XSAVE_INTERNAL)
+/*
+ * Some sanity checks.
+ * HAVE_KERNEL_FPU_INTERNAL and HAVE_KERNEL_FPU_XSAVE_INTERNAL are exclusive.
+ */
 #if defined(HAVE_KERNEL_FPU_INTERNAL)
+#error "HAVE_KERNEL_FPU_INTERNAL and HAVE_KERNEL_FPU_XSAVE_INTERNAL defined"
+#endif
+/*
+ * For kernels >= 5.16 we have to use inline assembly with the XSAVE{,OPT,S}
+ * instructions, so we need the toolchain to support at least XSAVE.
+ */
+#if !defined(HAVE_XSAVE)
+#error "Toolchain needs to support the XSAVE assembler instruction"
+#endif
+#endif
 
 #include <linux/mm.h>
+#include <linux/slab.h>
 
 extern union fpregs_state **zfs_kfpu_fpregs;
 
@@ -191,7 +209,9 @@ kfpu_init(void)
 }
 
 #define	kfpu_allowed()		1
+#if defined(HAVE_KERNEL_FPU_INTERNAL)
 #define	ex_handler_fprestore	ex_handler_default
+#endif
 
 /*
  * FPU save and restore instructions.
@@ -206,6 +226,7 @@ kfpu_init(void)
 #define	kfpu_fxsr_clean(rval)	__asm("fnclex; emms; fildl %P[addr]" \
 				    : : [addr] "m" (rval));
 
+#if defined(HAVE_KERNEL_FPU_INTERNAL)
 static inline void
 kfpu_save_xsave(struct xregs_state *addr, uint64_t mask)
 {
@@ -217,6 +238,21 @@ kfpu_save_xsave(struct xregs_state *addr, uint64_t mask)
 	XSTATE_XSAVE(addr, low, hi, err);
 	WARN_ON_ONCE(err);
 }
+#endif /* defined(HAVE_KERNEL_FPU_INTERNAL) */
+
+#if defined(HAVE_KERNEL_FPU_XSAVE_INTERNAL)
+#define	kfpu_do_xsave(instruction, addr, mask)			\
+{								\
+	uint32_t low, hi;					\
+								\
+	low = mask;						\
+	hi = (uint64_t)(mask) >> 32;				\
+	__asm(instruction " %[dst]\n\t"				\
+	    :							\
+	    : [dst] "m" (*(addr)), "a" (low), "d" (hi)		\
+	    : "memory");					\
+}
+#endif /* defined(HAVE_KERNEL_FPU_XSAVE_INTERNAL) */
 
 static inline void
 kfpu_save_fxsr(struct fxregs_state *addr)
@@ -233,6 +269,7 @@ kfpu_save_fsave(struct fregs_state *addr)
 	kfpu_fnsave(addr);
 }
 
+#if defined(HAVE_KERNEL_FPU_INTERNAL)
 static inline void
 kfpu_begin(void)
 {
@@ -250,7 +287,6 @@ kfpu_begin(void)
 	 * FPU state to be correctly preserved and restored.
 	 */
 	union fpregs_state *state = zfs_kfpu_fpregs[smp_processor_id()];
-
 	if (static_cpu_has(X86_FEATURE_XSAVE)) {
 		kfpu_save_xsave(&state->xsave, ~0);
 	} else if (static_cpu_has(X86_FEATURE_FXSR)) {
@@ -259,7 +295,50 @@ kfpu_begin(void)
 		kfpu_save_fsave(&state->fsave);
 	}
 }
+#endif /* defined(HAVE_KERNEL_FPU_INTERNAL) */
+
+#if defined(HAVE_KERNEL_FPU_XSAVE_INTERNAL)
+static inline void
+kfpu_begin(void)
+{
+	/*
+	 * Preemption and interrupts must be disabled for the critical
+	 * region where the FPU state is being modified.
+	 */
+	preempt_disable();
+	local_irq_disable();
+
+	/*
+	 * The current FPU registers need to be preserved by kfpu_begin()
+	 * and restored by kfpu_end().  They are stored in a dedicated
+	 * per-cpu variable, not in the task struct, this allows any user
+	 * FPU state to be correctly preserved and restored.
+	 */
+	union fpregs_state *state = zfs_kfpu_fpregs[smp_processor_id()];
+#if defined(HAVE_XSAVES)
+	if (static_cpu_has(X86_FEATURE_XSAVES)) {
+		kfpu_do_xsave("xsaves", &state->xsave, ~0);
+		goto out;
+	}
+#endif
+#if defined(HAVE_XSAVEOPT)
+	if (static_cpu_has(X86_FEATURE_XSAVEOPT)) {
+		kfpu_do_xsave("xsaveopt", &state->xsave, ~0);
+		goto out;
+	}
+#endif
+	if (static_cpu_has(X86_FEATURE_XSAVE)) {
+		kfpu_do_xsave("xsave", &state->xsave, ~0);
+	} else if (static_cpu_has(X86_FEATURE_FXSR)) {
+		kfpu_save_fxsr(&state->fxsave);
+	} else {
+		kfpu_save_fsave(&state->fsave);
+	}
+out:
+}
+#endif /* defined(HAVE_KERNEL_FPU_XSAVE_INTERNAL) */
 
+#if defined(HAVE_KERNEL_FPU_INTERNAL)
 static inline void
 kfpu_restore_xsave(struct xregs_state *addr, uint64_t mask)
 {
@@ -269,6 +348,21 @@ kfpu_restore_xsave(struct xregs_state *addr, uint64_t mask)
 	hi = mask >> 32;
 	XSTATE_XRESTORE(addr, low, hi);
 }
+#endif /* defined(HAVE_KERNEL_FPU_INTERNAL) */
+
+#if defined(HAVE_KERNEL_FPU_XSAVE_INTERNAL)
+#define	kfpu_do_xrstor(instruction, addr, mask)			\
+{								\
+	uint32_t low, hi;					\
+								\
+	low = mask;						\
+	hi = (uint64_t)(mask) >> 32;				\
+	__asm(instruction " %[src]"				\
+	    :							\
+	    : [src] "m" (*(addr)), "a" (low), "d" (hi)		\
+	    : "memory");					\
+}
+#endif /* defined(HAVE_KERNEL_FPU_XSAVE_INTERNAL) */
 
 static inline void
 kfpu_restore_fxsr(struct fxregs_state *addr)
@@ -294,6 +388,7 @@ kfpu_restore_fsave(struct fregs_state *addr)
 	kfpu_frstor(addr);
 }
 
+#if defined(HAVE_KERNEL_FPU_INTERNAL)
 static inline void
 kfpu_end(void)
 {
@@ -310,6 +405,32 @@ kfpu_end(void)
 	local_irq_enable();
 	preempt_enable();
 }
+#endif /* defined(HAVE_KERNEL_FPU_INTERNAL) */
+
+#if defined(HAVE_KERNEL_FPU_XSAVE_INTERNAL)
+static inline void
+kfpu_end(void)
+{
+	union fpregs_state *state = zfs_kfpu_fpregs[smp_processor_id()];
+#if defined(HAVE_XSAVES)
+	if (static_cpu_has(X86_FEATURE_XSAVES)) {
+		kfpu_do_xrstor("xrstors", &state->xsave, ~0);
+		goto out;
+	}
+#endif
+	if (static_cpu_has(X86_FEATURE_XSAVE)) {
+		kfpu_do_xrstor("xrstor", &state->xsave, ~0);
+	} else if (static_cpu_has(X86_FEATURE_FXSR)) {
+		kfpu_save_fxsr(&state->fxsave);
+	} else {
+		kfpu_save_fsave(&state->fsave);
+	}
+out:
+	local_irq_enable();
+	preempt_enable();
+
+}
+#endif /* defined(HAVE_KERNEL_FPU_XSAVE_INTERNAL) */
 
 #else
 
@@ -322,7 +443,7 @@ kfpu_end(void)
 #define	kfpu_init()		0
 #define	kfpu_fini()		((void) 0)
 
-#endif /* defined(HAVE_KERNEL_FPU_INTERNAL) */
+#endif /* defined(HAVE_KERNEL_FPU_INTERNAL || HAVE_KERNEL_FPU_XSAVE_INTERNAL) */
 #endif /* defined(KERNEL_EXPORTS_X86_FPU) */
 
 /*

module/zcommon/zfs_prop.c

@@ -996,10 +996,10 @@ zfs_prop_align_right(zfs_prop_t prop)
 
 #include <sys/simd.h>
 
-#if defined(HAVE_KERNEL_FPU_INTERNAL)
+#if defined(HAVE_KERNEL_FPU_INTERNAL) || defined(HAVE_KERNEL_FPU_XSAVE_INTERNAL)
 union fpregs_state **zfs_kfpu_fpregs;
 EXPORT_SYMBOL(zfs_kfpu_fpregs);
-#endif /* HAVE_KERNEL_FPU_INTERNAL */
+#endif /* HAVE_KERNEL_FPU_INTERNAL || HAVE_KERNEL_FPU_XSAVE_INTERNAL */
 
 static int __init
 zcommon_init(void)

tests/runfiles/linux.run

@@ -151,6 +151,12 @@ tags = ['functional', 'projectquota']
 tests = ['send_realloc_dnode_size', 'send_encrypted_files']
 tags = ['functional', 'rsend']
 
+[tests/functional/simd:Linux]
+pre =
+post =
+tests = ['simd_supported']
+tags = ['functional', 'simd']
+
 [tests/functional/snapshot:Linux]
 tests = ['snapshot_015_pos', 'snapshot_016_pos']
 tags = ['functional', 'snapshot']

tests/zfs-tests/tests/functional/Makefile.am

@@ -88,5 +88,6 @@ SUBDIRS = \
 
 if BUILD_LINUX
 SUBDIRS += \
+	simd \
 	tmpfile
 endif

tests/zfs-tests/tests/functional/simd/Makefile.am

@@ -0,0 +1,2 @@
+pkgdatadir = $(datadir)/@PACKAGE@/zfs-tests/tests/functional/simd
+dist_pkgdata_SCRIPTS = simd_supported.ksh