IMPORTANT: The master branch is unstable, working towards a v2 release that breaks a lot of stuff. Use the v1-stable branch if you want to suggest changes.

Racecar

Racecar is a friendly and easy-to-approach Kafka consumer framework. It allows you to write small applications that process messages stored in Kafka topics while optionally integrating with your Rails models.

The framework is based on rdkafka-ruby, which, when used directly, can be a challenge: it's a flexible library with lots of knobs and options. Most users don't need that level of flexibility, though. Racecar provides a simple and intuitive way to build and configure Kafka consumers.

NOTE: Racecar requires Kafka 0.10 or higher.

Table of content

1. Installation
2. Usage
   1. Creating consumers
   2. Running consumers
   3. Producing messages
   4. Configuration
   5. Testing consumers
   6. Deploying consumers
   7. Handling errors
   8. Logging
   9. Operations
3. Development
4. Contributing
5. Support and Discussion
6. Copyright and license

Installation

Add this line to your application's Gemfile:

gem 'racecar'

And then execute:

$ bundle

Or install it yourself as:

$ gem install racecar

Then execute (if you're in a Rails application):

$ bundle exec rails generate racecar:install

This will add a config file in config/racecar.yml.

Usage

Racecar is built for simplicity of development and operation. If you need more flexibility, it's quite straightforward to build your own Kafka consumer executables using ruby-kafka directly.

First, a short introduction to the Kafka consumer concept as well as some basic background on Kafka.

Kafka stores messages in so-called partitions which are grouped into topics. Within a partition, each message gets a unique offset.

In Kafka, consumer groups are sets of processes that collaboratively process messages from one or more Kafka topics; they divide up the topic partitions amongst themselves and make sure to reassign the partitions held by any member of the group that happens to crash or otherwise becomes unavailable, thus minimizing the risk of disruption. A consumer in a group is responsible for keeping track of which messages in a partition it has processed – since messages are processed in-order within a single partition, this means keeping track of the offset into the partition that has been processed. Consumers periodically commit these offsets to the Kafka brokers, making sure that another consumer can resume from those positions if there is a crash.

Creating consumers

A Racecar consumer is a simple Ruby class that inherits from Racecar::Consumer:

class UserBanConsumer < Racecar::Consumer
  subscribes_to "user_banned"

  def process(message)
    data = JSON.parse(message.value)
    user = User.find(data["user_id"])
    user.banned = true
    user.save!
  end
end

In order to create your own consumer, run the Rails generator racecar:consumer:

$ bundle exec rails generate racecar:consumer TapDance

This will create a file at app/consumers/tap_dance_consumer.rb which you can modify to your liking. Add one or more calls to subscribes_to in order to have the consumer subscribe to Kafka topics.

Now run your consumer with bundle exec racecar TapDanceConsumer.

Note: if you're not using Rails, you'll have to add the file yourself. No-one will judge you for copy-pasting it.

Initializing consumers

You can optionally add an initialize method if you need to do any set-up work before processing messages, e.g.

class PushNotificationConsumer < Racecar::Consumer
  subscribes_to "notifications"

  def initialize
    @push_service = PushService.new # pretend this exists.
  end

  def process(message)
    data = JSON.parse(message.value)

    @push_service.notify!(
      recipient: data.fetch("recipient"),
      notification: data.fetch("notification"),
    )
  end
end

This is useful to do any one-off work that you wouldn't want to do for each and every message.

Setting the starting position

When a consumer is started for the first time, it needs to decide where in each partition to start. By default, it will start at the beginning, meaning that all past messages will be processed. If you want to instead start at the end of each partition, change your subscribes_to like this:

subscribes_to "some-topic", start_from_beginning: false

Note that once the consumer has started, it will commit the offsets it has processed until and in the future will resume from those.

Processing messages in batches

If you want to process whole batches of messages at a time, simply rename your #process method to #process_batch. The method will now be called with an array of message objects:

class ArchiveEventsConsumer < Racecar::Consumer
  subscribes_to "events"

  def process_batch(messages)
    file_name = [
      messages.first.topic, # the topic this batch of messages came from.
      messages.first.partition, # the partition this batch of messages came from.
      messages.first.offset, # offset of the first message in the batch.
      messages.last.offset, # offset of the last message in the batch.
    ].join("-")

    File.open(file_name, "w") do |file|
      # the messages in the batch.
      messages.each do |message|
        file << message.value
      end
    end
  end
end

An important detail is that, if an exception is raised while processing a batch, the whole batch is re-processed.

Message headers

Any headers set on the message will be available when consuming the message:

message.headers #=> { "Header-A" => 42, ... }

Long-running message processing

In order to avoid your consumer being kicked out of its group during long-running message processing operations, you'll need to let Kafka regularly know that the consumer is still healthy. There's two mechanisms in place to ensure that:

Heartbeats: They are automatically sent in the background and ensure the broker can still talk to the consumer. This will detect network splits, ungraceful shutdowns, etc.

Message Fetch Interval: Kafka expects the consumer to query for new messages within this time limit. This will detect situations with slow IO or the consumer being stuck in an infinite loop without making actual progress. This limit applies to a whole batch if you do batch processing. Use max_poll_interval to increase the default 5 minute timeout, or reduce batching with fetch_messages.

Tearing down resources when stopping

When a Racecar consumer shuts down, it gets the opportunity to tear down any resources held by the consumer instance. For example, it may make sense to close any open files or network connections. Doing so is simple: just implement a #teardown method in your consumer class and it will be called during the shutdown procedure.

class ArchiveConsumer < Racecar::Consumer
  subscribes_to "events"

  def initialize
    @file = File.open("archive", "a")
  end

  def process(message)
    @file << message.value
  end

  def teardown
    @file.close
  end
end

Running consumers

Racecar is first and foremost an executable consumer runner. The racecar executable takes as argument the name of the consumer class that should be run. Racecar automatically loads your Rails application before starting, and you can load any other library you need by passing the --require flag, e.g.

$ bundle exec racecar --require dance_moves TapDanceConsumer

The first time you execute racecar with a consumer class a consumer group will be created with a group id derived from the class name (this can be configured). If you start racecar with the same consumer class argument multiple times, the processes will join the existing group – even if you start them on other nodes. You will typically want to have at least two consumers in each of your groups – preferably on separate nodes – in order to deal with failures.

Producing messages

Consumers can produce messages themselves, allowing for powerful stream processing applications that transform and filter message streams. The API for this is simple:

class GeoCodingConsumer < Racecar::Consumer
  subscribes_to "pageviews"

  def process(message)
    pageview = JSON.parse(message.value)
    ip_address = pageview.fetch("ip_address")

    country = GeoCode.country(ip_address)

    # Enrich the original message:
    pageview["country"] = country

    # The `produce` method enqueues a message to be delivered after #process
    # returns. It won't actually deliver the message.
    produce(JSON.dump(pageview), topic: "pageviews-with-country", key: pageview["id"])
  end
end

The deliver! method can be used to block until the broker received all queued published messages (according to the publisher ack settings). This will automatically being called in the shutdown procedure of a consumer.

You can set message headers by passing a headers: option with a Hash of headers.

Configuration

Racecar provides a flexible way to configure your consumer in a way that feels at home in a Rails application. If you haven't already, run bundle exec rails generate racecar:install in order to generate a config file. You'll get a separate section for each Rails environment, with the common configuration values in a shared common section.

Note: many of these configuration keys correspond directly to similarly named concepts in ruby-kafka; for more details on low-level operations, read that project's documentation.

It's also possible to configure Racecar using environment variables. For any given configuration key, there should be a corresponding environment variable with the prefix RACECAR_, in upper case. For instance, in order to configure the client id, set RACECAR_CLIENT_ID=some-id in the process in which the Racecar consumer is launched. You can set brokers by passing a comma-separated list, e.g. RACECAR_BROKERS=kafka1:9092,kafka2:9092,kafka3:9092.

Finally, you can configure Racecar directly in Ruby. The file config/racecar.rb will be automatically loaded if it exists; in it, you can configure Racecar using a simple API:

Racecar.configure do |config|
  # Each config variable can be set using a writer attribute.
  config.brokers = ServiceDiscovery.find("kafka-brokers")
end

Basic configuration

• brokers – A list of Kafka brokers in the cluster that you're consuming from. Defaults to localhost on port 9092, the default Kafka port.
• client_id – A string used to identify the client in logs and metrics.
• group_id – The group id to use for a given group of consumers. Note that this must be different for each consumer class. If left blank a group id is generated based on the consumer class name such that (for example) a consumer with the class name BaconConsumer would default to a group id of bacon-consumer.
• group_id_prefix – A prefix used when generating consumer group names. For instance, if you set the prefix to be kevin. and your consumer class is named BaconConsumer, the resulting consumer group will be named kevin.bacon-consumer.

Logging

• logfile – A filename that log messages should be written to. Default is nil, which means logs will be written to standard output.
• log_level – The log level for the Racecar logs, one of debug, info, warn, or error. Default is info.

Consumer checkpointing

The consumers will checkpoint their positions from time to time in order to be able to recover from failures. This is called committing offsets, since it's done by tracking the offset reached in each partition being processed, and committing those offset numbers to the Kafka offset storage API. If you can tolerate more double-processing after a failure, you can increase the interval between commits in order to better performance. You can also do the opposite if you prefer less chance of double-processing.

• offset_commit_interval – How often to save the consumer's position in Kafka. Default is every 10 seconds.

Timeouts & intervals

All timeouts are defined in number of seconds.

• session_timeout – The idle timeout after which a consumer is kicked out of the group. Consumers must send heartbeats with at least this frequency.
• heartbeat_interval – How often to send a heartbeat message to Kafka.
• max_poll_interval – The maximum time between two message fetches before the consumer is kicked out of the group. Put differently, your (batch) processing must finish earlier than this.
• pause_timeout – How long to pause a partition for if the consumer raises an exception while processing a message. Default is to pause for 10 seconds. Set this to 0 in order to disable automatic pausing of partitions or to -1 to pause indefinitely.
• pause_with_exponential_backoff – Set to true if you want to double the pause_timeout on each consecutive failure of a particular partition.
• socket_timeout – How long to wait when trying to communicate with a Kafka broker. Default is 30 seconds.
• max_wait_time – How long to allow the Kafka brokers to wait before returning messages. A higher number means larger batches, at the cost of higher latency. Default is 1 second.

Memory & network usage

Kafka is really good at throwing data at consumers, so you may want to tune these variables in order to avoid ballooning your process' memory or saturating your network capacity.

Racecar uses ruby-kafka under the hood, which fetches messages from the Kafka brokers in a background thread. This thread pushes fetch responses, possible containing messages from many partitions, into a queue that is read by the processing thread (AKA your code). The main way to control the fetcher thread is to control the size of those responses and the size of the queue.

• max_bytes — Maximum amount of data the broker shall return for a Fetch request.
• min_message_queue_size — The minimum number of messages in the local consumer queue.

The memory usage limit is roughly estimated as max_bytes * min_message_queue_size, plus whatever your application uses.

SSL encryption, authentication & authorization

• security_protocol – Protocol used to communicate with brokers (:ssl)
• ssl_ca_location – File or directory path to CA certificate(s) for verifying the broker's key
• ssl_crl_location – Path to CRL for verifying broker's certificate validity
• ssl_keystore_location – Path to client's keystore (PKCS#12) used for authentication
• ssl_keystore_password – Client's keystore (PKCS#12) password

SASL encryption, authentication & authorization

Racecar has support for using SASL to authenticate clients using either the GSSAPI or PLAIN mechanism either via plaintext or SSL connection.

• security_protocol – Protocol used to communicate with brokers (:sasl_plaintext :sasl_ssl)

• sasl_mechanism – SASL mechanism to use for authentication (GSSAPI PLAIN SCRAM-SHA-256 SCRAM-SHA-512)

• sasl_kerberos_principal – This client's Kerberos principal name

• sasl_kerberos_kinit_cmd – Full kerberos kinit command string, %{config.prop.name} is replaced by corresponding config object value, %{broker.name} returns the broker's hostname

• sasl_kerberos_keytab – Path to Kerberos keytab file. Uses system default if not set

• sasl_kerberos_min_time_before_relogin – Minimum time in milliseconds between key refresh attempts

• sasl_username – SASL username for use with the PLAIN and SASL-SCRAM-.. mechanism

• sasl_password – SASL password for use with the PLAIN and SASL-SCRAM-.. mechanism

Producing messages

These settings are related to consumers that produce messages to Kafka.

• producer_compression_codec – If defined, Racecar will compress messages before writing them to Kafka. The codec needs to be one of gzip, lz4, or snappy, either as a Symbol or a String.

Datadog monitoring

Racecar supports configuring ruby-kafka's Datadog monitoring integration. If you're running a normal Datadog agent on your host, you just need to set datadog_enabled to true, as the rest of the settings come with sane defaults.

• datadog_enabled – Whether Datadog monitoring is enabled (defaults to false).
• datadog_host – The host running the Datadog agent.
• datadog_port – The port of the Datadog agent.
• datadog_namespace – The namespace to use for Datadog metrics.
• datadog_tags – Tags that should always be set on Datadog metrics.

Testing consumers

Since consumers are merely classes that implement a simple interface, they're dead simple to test.

Here's an example of testing a consumer class using RSpec and Rails:

# app/consumers/create_contacts_consumer.rb
#
# Creates a Contact whenever an email address is written to the
# `email-addresses` topic.
class CreateContactsConsumer < Racecar::Consumer
  subscribes_to "email-addresses"

  def process(message)
    email = message.value

    Contact.create!(email: email)
  end
end

# spec/consumers/create_contacts_consumer_spec.rb
describe CreateContactsConsumer do
  it "creates a Contact for each email address in the topic" do
    message = double("message", value: "john@example.com")
    consumer = CreateContactsConsumer.new

    consumer.process(message)

    expect(Contact.where(email: "john@example.com")).to exist
  end
end

Deploying consumers

If you're already deploying your Rails application using e.g. Capistrano, all you need to do to run your Racecar consumers in production is to have some process supervisor start the processes and manage them for you.

Foreman is a very straightford tool for interfacing with several process supervisor systems. You define your process types in a Procfile, e.g.

racecar-process-payments: bundle exec racecar ProcessPaymentsConsumer
racecar-resize-images: bundle exec racecar ResizeImagesConsumer

If you've ever used Heroku you'll recognize the format – indeed, deploying to Heroku should just work if you add Racecar invocations to your Procfile.

With Foreman, you can easily run these processes locally by executing foreman run; in production you'll want to export to another process management format such as Upstart or Runit. capistrano-foreman allows you to do this with Capistrano.

Deploying to Kubernetes

If you run your applications in Kubernetes, use the following Deployment spec as a starting point:

apiVersion: apps/v1
kind: Deployment
metadata:
  name: my-racecar-deployment
  labels:
    app: my-racecar
spec:
  replicas: 3 # <-- this will give us three consumers in the group.
  selector:
    matchLabels:
      app: my-racecar
  strategy:
    type: Recreate # <-- this is the important part.
  template:
    metadata:
      labels:
        app: my-racecar
    spec:
      containers:
      - name: my-racecar
        image: my-racecar-image
        command: ["bundle", "exec", "racecar", "MyConsumer"]
        env: # <-- you can configure the consumer using environment variables!
        - name: RACECAR_BROKERS
          value: kafka1,kafka2,kafka3
        - name: RACECAR_OFFSET_COMMIT_INTERVAL
          value: 5

The important part is the strategy.type value, which tells Kubernetes how to upgrade from one version of your Deployment to another. Many services use so-called rolling updates, where some but not all containers are replaced with the new version. This is done so that, if the new version doesn't work, the old version is still there to serve most of the requests. For Kafka consumers, this doesn't work well. The reason is that every time a consumer joins or leaves a group, every other consumer in the group needs to stop and synchronize the list of partitions assigned to each group member. So if the group is updated in a rolling fashion, this synchronization would occur over and over again, causing undesirable double-processing of messages as consumers would start only to be synchronized shortly after.

Instead, the Recreate update strategy should be used. It completely tears down the existing containers before starting all of the new containers simultaneously, allowing for a single synchronization stage and a much faster, more stable deployment update.

Running consumers in the background

While it is recommended that you use a process supervisor to manage the Racecar consumer processes, it is possible to daemonize the Racecar processes themselves if that is more to your liking. Note that this support is currently in alpha, as it hasn't been tested extensively in production settings.

In order to daemonize Racecar, simply pass in --daemonize when executing the command:

$ bundle exec racecar --daemonize ResizeImagesConsumer

This will start the consumer process in the background. A file containing the process id (the "pidfile") will be created, with the file name being constructed from the consumer class name. If you want to specify the name of the pidfile yourself, pass in --pidfile=some-file.pid.

Since the process is daemonized, you need to know the process id (PID) in order to be able to stop it. Use the racecarctl command to do this:

$ bundle exec racecarctl stop --pidfile=some-file.pid

Again, the recommended approach is to manage the processes using process managers. Only do this if you have to.

Handling errors

When processing messages from a Kafka topic, your code may encounter an error and raise an exception. The cause is typically one of two things:

1. The message being processed is somehow malformed or doesn't conform with the assumptions made by the processing code.
2. You're using some external resource such as a database or a network API that is temporarily unavailable.

In the first case, you'll need to either skip the message or deploy a new version of your consumer that can correctly handle the message that caused the error. In order to skip a message, handle the relevant exception in your #process method:

def process(message)
  data = JSON.parse(message.value)
  # ...
rescue JSON::ParserError => e
  puts "Failed to process message in #{message.topic}/#{message.partition} at offset #{message.offset}: #{e}"
  # It's probably a good idea to report the exception to an exception tracker service.
end

Since the exception is handled by your #process method and is no longer raised, Racecar will consider the message successfully processed. Tracking these errors in an exception tracker or some other monitoring system is highly recommended, as you otherwise will have little insight into how many messages are being skipped this way.

If, on the other hand, the exception was cause by a temporary network or database problem, you will probably want to retry processing of the message after some time has passed. By default, if an exception is raised by the #process method, the consumer will pause all processing of the message's partition for some number of seconds, configured by setting the pause_timeout configuration variable. This allows the consumer to continue processing messages from other partitions that may not be impacted by the problem while still making sure to not drop the original message. Since messages in a single Kafka topic partition must be processed in order, it's not possible to keep processing other messages in that partition.

In addition to retrying the processing of messages, Racecar also allows defining an error handler callback that is invoked whenever an exception is raised by your #process method. This allows you to track and report errors to a monitoring system:

Racecar.config.on_error do |exception, info|
  MyErrorTracker.report(exception, {
    topic: info[:topic],
    partition: info[:partition],
    offset: info[:offset],
  })
end

It is highly recommended that you set up an error handler.

Logging

By default, Racecar will log to STDOUT. If you're using Rails, your application code will use whatever logger you've configured there.

In order to make Racecar log its own operations to a log file, set the logfile configuration variable or pass --log filename.log to the racecar command.

Operations

In order to gracefully shut down a Racecar consumer process, send it the SIGTERM signal. Most process supervisors such as Runit and Kubernetes send this signal when shutting down a process, so using those systems will make things easier.

In order to introspect the configuration of a consumer process, send it the SIGUSR1 signal. This will make Racecar print its configuration to the standard error file descriptor associated with the consumer process, so you'll need to know where that is written to.

Development

After checking out the repo, run bin/setup to install dependencies. Then, run rspec to run the tests. You can also run bin/console for an interactive prompt that will allow you to experiment.

Contributing

Bug reports and pull requests are welcome on GitHub. Feel free to join our Slack team and ask how best to contribute!

Support and Discussion

If you've discovered a bug, please file a Github issue, and make sure to include all the relevant information, including the version of Racecar, ruby-kafka, and Kafka that you're using.

If you have other questions, or would like to discuss best practises, how to contribute to the project, or any other ruby-kafka related topic, join our Slack team!

Copyright and license

Copyright 2017 Daniel Schierbeck & Zendesk

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License.

You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.