IRarry Threshold to 530, and workshop version for Binarylp

examples/Block3-Magic/Projects/BinaryLP (Workshop)/BinaryLP.ino

@@ -0,0 +1,87 @@
+/*
+* BinaryLP
+* 
+* This sort of works as an LP player. The difference is 
+* that instead of using a needle on a plastic disc, 
+* we use three IR sensors in a row to read a pattern from 
+* a paper disc. 
+* 
+* If you are both musically and digitally inclined, 
+* you will have lots of fun creating melodies with this.
+*
+* (c) 2013-2016 Arduino LLC.
+*/
+
+
+#include <EducationShield.h>
+#include "pitches.h"
+
+//IRArray(left, middle, right);
+IRArray ir = IRArray(A1, A2, A3);
+
+int piezo = 8; //Piezo pin
+int lastReading = 0; 
+
+void setup(){
+  pinMode(piezo, OUTPUT);
+
+  //Use this line to set the threshold of the IR sensors. 
+  //If you are using the Uno board, set the threshold to 380,if you're using the 101 board, set it to 530.
+  //Use ir.test() to check the values of each sensor in the loop()
+  ir.setThreshold(530);
+
+  Serial.begin(9600);
+}
+
+void loop(){
+  //Use this line to check the values from each IR sensor
+  //ir.test();
+
+  //Read the binary pattern and get a number from 0 to 7
+  int reading = ir.readBinary(); 
+
+  //Play a note depending on the read value
+  playNote(reading);
+
+}
+
+void playNote(int r){
+  //If the last note we played is the same as the new note
+  //we make a short break so that two notes are distinguished
+  if(lastReading==r){
+    noTone(piezo);
+    delay(20);
+  }
+
+  //Play a different note depending on the value of b.
+  //Check pitches.h to see which notes you can use.
+  //In this case the scale is C Major.
+  switch (r){
+    case 0:
+      break;
+    case 1:
+      tone(piezo, NOTE_C4);
+      break;
+    case 2:
+      tone(piezo, NOTE_D4);
+      break;
+    case 3:
+      tone(piezo, NOTE_E4);
+      break;
+    case 4:
+      tone(piezo, NOTE_F4);
+      break;
+    case 5:
+      tone(piezo, NOTE_G4);
+      break;
+    case 6:
+      tone(piezo, NOTE_A4);
+      break;
+    case 7:
+      tone(piezo, NOTE_B4);
+      break;   
+  }
+
+  //If r is more than 0 we save that value to lastByte
+  if(r>0)lastReading = r;
+}

examples/Block3-Magic/Projects/BinaryLP (Workshop)/pitches.h

@@ -0,0 +1,95 @@
+/*************************************************
+ * Public Constants
+ *************************************************/
+
+#define NOTE_B0  31
+#define NOTE_C1  33
+#define NOTE_CS1 35
+#define NOTE_D1  37
+#define NOTE_DS1 39
+#define NOTE_E1  41
+#define NOTE_F1  44
+#define NOTE_FS1 46
+#define NOTE_G1  49
+#define NOTE_GS1 52
+#define NOTE_A1  55
+#define NOTE_AS1 58
+#define NOTE_B1  62
+#define NOTE_C2  65
+#define NOTE_CS2 69
+#define NOTE_D2  73
+#define NOTE_DS2 78
+#define NOTE_E2  82
+#define NOTE_F2  87
+#define NOTE_FS2 93
+#define NOTE_G2  98
+#define NOTE_GS2 104
+#define NOTE_A2  110
+#define NOTE_AS2 117
+#define NOTE_B2  123
+#define NOTE_C3  131
+#define NOTE_CS3 139
+#define NOTE_D3  147
+#define NOTE_DS3 156
+#define NOTE_E3  165
+#define NOTE_F3  175
+#define NOTE_FS3 185
+#define NOTE_G3  196
+#define NOTE_GS3 208
+#define NOTE_A3  220
+#define NOTE_AS3 233
+#define NOTE_B3  247
+#define NOTE_C4  262
+#define NOTE_CS4 277
+#define NOTE_D4  294
+#define NOTE_DS4 311
+#define NOTE_E4  330
+#define NOTE_F4  349
+#define NOTE_FS4 370
+#define NOTE_G4  392
+#define NOTE_GS4 415
+#define NOTE_A4  440
+#define NOTE_AS4 466
+#define NOTE_B4  494
+#define NOTE_C5  523
+#define NOTE_CS5 554
+#define NOTE_D5  587
+#define NOTE_DS5 622
+#define NOTE_E5  659
+#define NOTE_F5  698
+#define NOTE_FS5 740
+#define NOTE_G5  784
+#define NOTE_GS5 831
+#define NOTE_A5  880
+#define NOTE_AS5 932
+#define NOTE_B5  988
+#define NOTE_C6  1047
+#define NOTE_CS6 1109
+#define NOTE_D6  1175
+#define NOTE_DS6 1245
+#define NOTE_E6  1319
+#define NOTE_F6  1397
+#define NOTE_FS6 1480
+#define NOTE_G6  1568
+#define NOTE_GS6 1661
+#define NOTE_A6  1760
+#define NOTE_AS6 1865
+#define NOTE_B6  1976
+#define NOTE_C7  2093
+#define NOTE_CS7 2217
+#define NOTE_D7  2349
+#define NOTE_DS7 2489
+#define NOTE_E7  2637
+#define NOTE_F7  2794
+#define NOTE_FS7 2960
+#define NOTE_G7  3136
+#define NOTE_GS7 3322
+#define NOTE_A7  3520
+#define NOTE_AS7 3729
+#define NOTE_B7  3951
+#define NOTE_C8  4186
+#define NOTE_CS8 4435
+#define NOTE_D8  4699
+#define NOTE_DS8 4978
+
+

examples/Block3-Magic/Projects/BinaryLP/BinaryLP.ino

@@ -28,7 +28,7 @@ void setup(){
   //Use this line to set the threshold of the IR sensors. 
   //If you are using the Uno board, set the threshold to 380,if you're using the 101 board, set it to 530.
   //Use ir.test() to check the values of each sensor in the loop()
-  ir.setThreshold(380);
+  ir.setThreshold(530);
 
   Serial.begin(9600);
 }