Update translation files

i18n/af.json

@@ -7,11 +7,11 @@
     "board": {
       "board": "Board{0}",
       "boardInfo": "Board Info",
-      "boardListItem": "{0} by {1}",
       "configDialog1": "Select both a Board and a Port if you want to upload a sketch.",
       "configDialog2": "If you only select a Board you will be able to compile, but not to upload your sketch.",
       "configDialogTitle": "Select Other Board & Port",
       "couldNotFindPreviouslySelected": "Could not find previously selected board '{0}' in installed platform '{1}'. Please manually reselect the board you want to use. Do you want to reselect it now?",
+      "disconnected": "Disconnected",
       "getBoardInfo": "Get Board Info",
       "inSketchbook": " (in Sketchbook)",
       "installManually": "Install Manually",
@@ -23,8 +23,10 @@
       "platformMissing": "The platform for the selected '{0}' board is not installed.",
       "pleasePickBoard": "Please pick a board connected to the port you have selected.",
       "port": "Port{0}",
+      "portLabel": "Port: {0}",
       "programmer": "Programeerder",
       "reselectLater": "Herselekteer later",
+      "selectBoard": "Kies Bord",
       "selectBoardForInfo": "Please select a board to obtain board info.",
       "selectPortForInfo": "Please select a port to obtain board info.",
       "showAllAvailablePorts": "Shows all available ports when enabled",

i18n/ar.json

@@ -7,11 +7,11 @@
     "board": {
       "board": "اللوحة {0}",
       "boardInfo": "معلومات اللوحة",
-      "boardListItem": "{0} في {1}",
       "configDialog1": "اختر لوحة و منفذ معا اذا اردت ان ترفع السكتش",
       "configDialog2": "اذا قمت باختيار لوحة فقط ستسطيع ان تترجم لكن بدون ان ترفع المشروع",
       "configDialogTitle": "اختر لوحات اخرى و المنفذ",
       "couldNotFindPreviouslySelected": "تعذر ايجاد اللوحة '{0}'  المختارة مسبقا في المنصة المثبتة '{1}' . الرجاء اعادة اختيار اللوحة التي تريد استعمالها يدويا . هل تريد باعادة الاختيار الان؟",
+      "disconnected": "Disconnected",
       "getBoardInfo": "الحصول على معلومات اللوحة",
       "inSketchbook": "(داخل ملف المشاريع)",
       "installManually": "ثبّت يدويا",
@@ -23,8 +23,10 @@
       "platformMissing": "المنصة للّوحة المختارة  '{0}'  غير مثبتة",
       "pleasePickBoard": "من فضلك اختر لوحة متصلة على المنفذ الذي اخترته",
       "port": "المنفذ {0}",
+      "portLabel": "Port: {0}",
       "programmer": "المبرمجة",
       "reselectLater": "اعد الاختيار لاحقا",
+      "selectBoard": "اختر لوحة",
       "selectBoardForInfo": "الرجاء اختيار لوحة من احل الحصول على معلومات اللوحة",
       "selectPortForInfo": "الرجاء اختيار منفذ من اجل الحصول على معلومات اللوحة",
       "showAllAvailablePorts": "يظهر كل المنافذ المتاحة عند تفعيله",

i18n/az.json

@@ -7,11 +7,11 @@
     "board": {
       "board": "Board{0}",
       "boardInfo": "Board Info",
-      "boardListItem": "{0} at {1}",
       "configDialog1": "Select both a Board and a Port if you want to upload a sketch.",
       "configDialog2": "If you only select a Board you will be able to compile, but not to upload your sketch.",
       "configDialogTitle": "Select Other Board & Port",
       "couldNotFindPreviouslySelected": "Could not find previously selected board '{0}' in installed platform '{1}'. Please manually reselect the board you want to use. Do you want to reselect it now?",
+      "disconnected": "Disconnected",
       "getBoardInfo": "Get Board Info",
       "inSketchbook": " (in Sketchbook)",
       "installManually": "Əl ilə yüklə",
@@ -23,8 +23,10 @@
       "platformMissing": "The platform for the selected '{0}' board is not installed.",
       "pleasePickBoard": "Please pick a board connected to the port you have selected.",
       "port": "Port{0}",
+      "portLabel": "Port: {0}",
       "programmer": "Proqramlayıcı",
       "reselectLater": "Daha Sonra Yenidən Seç",
+      "selectBoard": "Select Board",
       "selectBoardForInfo": "Please select a board to obtain board info.",
       "selectPortForInfo": "Please select a port to obtain board info.",
       "showAllAvailablePorts": "Shows all available ports when enabled",

i18n/bg.json

@@ -7,11 +7,11 @@
     "board": {
       "board": "Платка{0}",
       "boardInfo": "Информация за платка",
-      "boardListItem": "{0} в {1}",
       "configDialog1": "Изберете както платка, така и порт, ако искате да качите скица.",
       "configDialog2": "If you only select a Board you will be able to compile, but not to upload your sketch.",
       "configDialogTitle": "Изберете друга платка и порт",
       "couldNotFindPreviouslySelected": "Не можа да се намери по-рано избрана платка „{0}“ в инсталираната платформа „{1}“. Моля, изберете отново ръчно платката, която искате да използвате. Искате ли да я изберете отново сега?",
+      "disconnected": "Disconnected",
       "getBoardInfo": "Вземи информация за платката",
       "inSketchbook": "(в Скицника)",
       "installManually": "Инсталирай ръчно",
@@ -23,8 +23,10 @@
       "platformMissing": "Платформата за избраната платка „{0}“ не е инсталирана.",
       "pleasePickBoard": "Моля, изберете платка, свързана към порта, който сте избрали.",
       "port": "Порт{0}",
+      "portLabel": "Port: {0}",
       "programmer": "Програматор",
       "reselectLater": "Изберете отново по-късно",
+      "selectBoard": "Изберете платка",
       "selectBoardForInfo": "Моля, изберете платка, за да получите информация за нея.",
       "selectPortForInfo": "Моля, изберете порт, за да получите информация за платката.",
       "showAllAvailablePorts": "Показва всички налични портове, когато е активиран",

i18n/ca_ES.json

@@ -7,11 +7,11 @@
     "board": {
       "board": "Tarja{0}",
       "boardInfo": "Informació de la Tarja",
-      "boardListItem": "{0}a{1}",
       "configDialog1": "Seleccioneu una Tarja i un port si voleu carregar un programa.",
       "configDialog2": "Si només seleccioneu una Tarja, podreu compilar, però no carregar el vostre programa.",
       "configDialogTitle": "Selecciona una altre Tarja i Port",
       "couldNotFindPreviouslySelected": "No s'ha pogut trobar la Tarja seleccionada anteriorment '{0}' a la plataforma instal·lada '{1}'. Torneu a seleccionar manualment la tarja que voleu utilitzar. Vols tornar a seleccionar-la ara?",
+      "disconnected": "Disconnected",
       "getBoardInfo": "Obtenir informació de la Tarja",
       "inSketchbook": "(al quadern de programes)",
       "installManually": "Instal·la Manualment",
@@ -23,8 +23,10 @@
       "platformMissing": "La plataforma per a la tarja '{0}' seleccionada no està instal·lada.",
       "pleasePickBoard": "Si us plau, trieu una tarja connectada al port que heu seleccionat.",
       "port": "Port {0}",
+      "portLabel": "Port: {0}",
       "programmer": "Programador",
       "reselectLater": "Torneu a seleccionar més tard",
+      "selectBoard": "Seleccioneu la Tarja",
       "selectBoardForInfo": "Seleccioneu una tarja per obtenir informació sobre ella.",
       "selectPortForInfo": "Seleccioneu un port per obtenir la informació de la tarja.",
       "showAllAvailablePorts": "Mostra tots els ports disponibles quan estiguin habilitats",

i18n/cs.json

@@ -7,11 +7,11 @@
     "board": {
       "board": "Deska {0}",
       "boardInfo": "Info o desce",
-      "boardListItem": "{0}v{1}",
       "configDialog1": "Pokud chcete nahrát sketch, musíte zvolit jak desku tak i port.",
       "configDialog2": "Pokud zvolíte jen desku, budete schopni kompilovat sketch, ale nebudete ji moci nahrát do desky.",
       "configDialogTitle": "Zvolte desku a port",
       "couldNotFindPreviouslySelected": "Dříve zvolená deska '{0}' v instalované platformě '{1}' nebyla nalezena. Zvolte prosím manuálně desku kterou chcete použít. Chcete tuto desku zvolit nyní? ",
+      "disconnected": "Disconnected",
       "getBoardInfo": "Získat info o desce.",
       "inSketchbook": "(v projektech)",
       "installManually": "Instalovat ručně",
@@ -23,8 +23,10 @@
       "platformMissing": "Platforma pro zvolenou desku '{0}' není nainstalována.",
       "pleasePickBoard": "Vyberte prosím desku která je připojená k zvolenému portu. ",
       "port": "Port {0}",
+      "portLabel": "Port: {0}",
       "programmer": "Programátor",
       "reselectLater": "Zvolit později",
+      "selectBoard": "Zvolit desku",
       "selectBoardForInfo": "Prosím zvolte desku pro získání informací o desce.",
       "selectPortForInfo": "Prosím zvolte port pro získání informací o desce.",
       "showAllAvailablePorts": "Zobrazit všechny dostupné porty (pokud je zaškrtnuto)",

i18n/de.json

@@ -7,11 +7,11 @@
     "board": {
       "board": "Board{0}",
       "boardInfo": "Board-Informationen",
-      "boardListItem": "{0} bei {1}",
       "configDialog1": "Wählen Sie ein Board und einen Port, wenn Sie den Sketch hochladen möchten.",
       "configDialog2": "Wenn Sie nur ein Board auswählen, werden Sie den Sketch nur kompilieren können, jedoch nicht hochladen.",
       "configDialogTitle": "Andere Boards und Ports wählen",
       "couldNotFindPreviouslySelected": "Zuvor gewähltes Board '{0}' wurde nicht in der installierten Plaftform '{1}' gefunden. Bitte Board erneut auswählen. Jetzt auswählen?",
+      "disconnected": "Disconnected",
       "getBoardInfo": "Board-Informationen abrufen",
       "inSketchbook": "(im Sketchbook)",
       "installManually": "Manuell installieren",
@@ -23,8 +23,10 @@
       "platformMissing": "Die Plattform für das gewählte '{0}' Board ist nicht installiert.",
       "pleasePickBoard": "Bitte wählen Sie das Board, welches am ausgewählten Port angeschlossen ist.",
       "port": "Port{0}",
+      "portLabel": "Port: {0}",
       "programmer": "Programmer",
       "reselectLater": "Später auswählen",
+      "selectBoard": "Board wählen",
       "selectBoardForInfo": "Wähle ein Board für die Board-Informationen.",
       "selectPortForInfo": "Wähle ein Port, um Informationen über das Board zu erhalten.",
       "showAllAvailablePorts": "Zeige alle verfügbaren Ports, wenn aktiviert.",

i18n/el.json

@@ -7,11 +7,11 @@
     "board": {
       "board": "Πλακέτα{0}",
       "boardInfo": "Πληροφορίες Πλακέτας",
-      "boardListItem": "{0} στο {1}",
       "configDialog1": "Επίλεξε και Πλακέτα και Θύρα αν θέλεις να ανεβάσεις ένα σχέδιο.",
       "configDialog2": "If you only select a Board you will be able to compile, but not to upload your sketch.",
       "configDialogTitle": "Επιλέξτε Άλλη Πλακέτα & Θύρα",
       "couldNotFindPreviouslySelected": "Δεν έγινε εντοπισμός της προηγουμένως επιλεγμένης πλακέτας '{0}' στην εγκατεστημένη πλατφόρμα '{1}'. Παρακαλώ επίλεξε πάλι χειροκίνητα την πλακέτα που θέλεις να χρησιμοποιήσεις. Θέλεις να την επιλέξεις τώρα;",
+      "disconnected": "Disconnected",
       "getBoardInfo": "Εμφάνιση Πληροφοριών Πλακέτας",
       "inSketchbook": "(στα Σχέδια)",
       "installManually": "Χειροκίνητη Εγκατάσταση",
@@ -23,8 +23,10 @@
       "platformMissing": "Η πλατφόρμα για την επιλεγμένη πλακέτα '{0}' δεν έχει εγκατασταθεί.",
       "pleasePickBoard": "Πσρακαλώ επίλεξε μια πλακέτα που συνδέθηκε στην θύρα που έχεις επιλέξει.",
       "port": "Θύρα{0}",
+      "portLabel": "Port: {0}",
       "programmer": "Προγραμματιστής",
       "reselectLater": "Επιλογή αργότερα",
+      "selectBoard": "Επιλογή Πλακέτας",
       "selectBoardForInfo": "Παρακαλώ επίλεξε μια πλακέτα για εμφάνιση πληροφοριών πλακέτας.",
       "selectPortForInfo": "Παρακαλώ επίλεξε μια θύρα για εμφάνιση πληροφοριών πλακέτας.",
       "showAllAvailablePorts": "Εμφανίζει όλες τις διαθέσιμες θύρες όταν είναι ενεργοποιημένο.",

i18n/es.json

@@ -7,11 +7,11 @@
     "board": {
       "board": "Placa{0}",
       "boardInfo": "Información de la placa",
-      "boardListItem": "{0} en {1}",
       "configDialog1": "Selecciona tanto una placa como un puerto si quieres cargar un sketch.",
       "configDialog2": "Si seleccionas solo una placa podrás compilar, pero no cargar tu sketch.",
       "configDialogTitle": "Seleccione otra placa y puerto",
       "couldNotFindPreviouslySelected": "No se ha podido encontrar la placa previamente seleccionada '{0}' en la plataforma instalada '{1}'. Por favor, vuelve a seleccionar manualmente la placa que quieres utilizar. ¿Quieres volver a seleccionarla ahora?",
+      "disconnected": "Disconnected",
       "getBoardInfo": "Obtener información de la placa",
       "inSketchbook": " (en el Sketchbook)",
       "installManually": "Instalar manualmente",
@@ -23,8 +23,10 @@
       "platformMissing": "La plataforma seleccionada para la placa '{0}' no está instalada.",
       "pleasePickBoard": "Por favor, elija una placa conectada al puerto que haya seleccionado.",
       "port": "Puerto {0}",
+      "portLabel": "Port: {0}",
       "programmer": "Programador",
       "reselectLater": "Vuelve a seleccionar más tarde",
+      "selectBoard": "Seleccionar Placa",
       "selectBoardForInfo": "Por favor, seleccione una placa para obtener información sobre ella.",
       "selectPortForInfo": "Por favor, seleccione un puerto para obtener información sobre la placa.",
       "showAllAvailablePorts": "Muestra todos los puertos disponibles cuando está activado",

i18n/eu.json

@@ -7,11 +7,11 @@
     "board": {
       "board": "{0} plaka",
       "boardInfo": "Plakaren informazioa",
-      "boardListItem": "{0} hemen: {1}",
       "configDialog1": "Hautatu plaka bat eta ataka bat programa bat kargatu nahi baduzu.",
       "configDialog2": "Plaka bakarrik hautatzen baduzu, programa konpilatu ahal izango duzu, baina ez kargatu.",
       "configDialogTitle": "Hautatu beste plaka eta ataka bat",
       "couldNotFindPreviouslySelected": "Ezin izan da aurkitu aurrez hautatutako '{0}' plaka instalatutako '{1}' plataforman. Hautatu berriz eskuz erabili nahi duzun plaka. Orain berriz hautatu nahi duzu?",
+      "disconnected": "Disconnected",
       "getBoardInfo": "Eskuratu plakaren informazioa",
       "inSketchbook": "(programa bilduman)",
       "installManually": "Instalatu eskuz",
@@ -23,8 +23,10 @@
       "platformMissing": "Hautatutako '{0}' plakarentzako plataforma ez dago instalatuta.",
       "pleasePickBoard": "Aukeratu hautatu duzun atakara konektatutako plaka bat.",
       "port": "{0} ataka",
+      "portLabel": "Port: {0}",
       "programmer": "Programatzailea",
       "reselectLater": "Hautatu berriz geroago",
+      "selectBoard": "Hautatu plaka",
       "selectBoardForInfo": "Hautatu plaka bat plakaren informazioa eskuratzeko.",
       "selectPortForInfo": "Hautatu ataka bat plakaren informazioa eskuratzeko.",
       "showAllAvailablePorts": "Gaituta dagoenean erabilgarri dauden ataka guztiak erakusten ditu",

i18n/fa.json

@@ -7,11 +7,11 @@
     "board": {
       "board": "بورد {0}",
       "boardInfo": "مشخصات برد",
-      "boardListItem": "{0} در {1}",
       "configDialog1": "اگر می‌خواهید طرحی را آپلود کنید، هم یک تابلو و هم یک پورت انتخاب کنید.",
       "configDialog2": "اگر فقط تابلو را انتخاب کنید، می توانید کامپایل کنید، اما نمی توانید طرح خود را آپلود کنید.",
       "configDialogTitle": "انتخاب یک بورد و پورت دیگر",
       "couldNotFindPreviouslySelected": "نمی توان برد انتخاب شده قبلی '{0}' در پلتفرم نصب شده '{1}' را پیدا کرد. لطفاً تابلویی را که می‌خواهید استفاده کنید، مجدداً به‌صورت دستی انتخاب کنید. آیا اکنون می خواهید آن را مجدداً انتخاب کنید؟",
+      "disconnected": "Disconnected",
       "getBoardInfo": "دریافت راهنمای برد",
       "inSketchbook": "(در منبع طرح ها)",
       "installManually": "دستی نصب کن",
@@ -23,8 +23,10 @@
       "platformMissing": "پلت فرم برای برد انتخابی '{0}' نصب نشده است.",
       "pleasePickBoard": "لطفاً یک برد متصل به پورتی که انتخاب کرده اید را انتخاب کنید.",
       "port": "پورت {0}",
+      "portLabel": "Port: {0}",
       "programmer": "برنامه ریز",
       "reselectLater": "بعدا انتخاب کنید",
+      "selectBoard": "انتخاب برد",
       "selectBoardForInfo": "لطفاً یک برد را برای به دست آوردن اطلاعات هیئت مدیره انتخاب کنید.",
       "selectPortForInfo": "لطفاً یک پورت را برای به دست آوردن اطلاعات هیئت مدیره انتخاب کنید.",
       "showAllAvailablePorts": "نمایش تمام پورت های موجود در صورت فعال بودن",

i18n/fil.json

@@ -7,11 +7,11 @@
     "board": {
       "board": "Board{0}",
       "boardInfo": "Board Info",
-      "boardListItem": "{0} at {1}",
       "configDialog1": "Select both a Board and a Port if you want to upload a sketch.",
       "configDialog2": "If you only select a Board you will be able to compile, but not to upload your sketch.",
       "configDialogTitle": "Select Other Board & Port",
       "couldNotFindPreviouslySelected": "Could not find previously selected board '{0}' in installed platform '{1}'. Please manually reselect the board you want to use. Do you want to reselect it now?",
+      "disconnected": "Disconnected",
       "getBoardInfo": "Get Board Info",
       "inSketchbook": " (in Sketchbook)",
       "installManually": "Install Manually",
@@ -23,8 +23,10 @@
       "platformMissing": "The platform for the selected '{0}' board is not installed.",
       "pleasePickBoard": "Please pick a board connected to the port you have selected.",
       "port": "Port{0}",
+      "portLabel": "Port: {0}",
       "programmer": "Programmer",
       "reselectLater": "Reselect later",
+      "selectBoard": "Pumili ng board",
       "selectBoardForInfo": "Please select a board to obtain board info.",
       "selectPortForInfo": "Please select a port to obtain board info.",
       "showAllAvailablePorts": "Shows all available ports when enabled",