Sonoff ZB Bridge Pro: Status 99 after upgrading to Koenkk firmware 20240710 (SonoffZBPro_coord_20240710.hex)

[Torxgewinde]

PROBLEM DESCRIPTION

I upgraded to the newest Zigbee-Firmware, which I believe is https://github.com/arendst/Tasmota/blob/development/tools/fw_SonoffZigbeeBridgePro_cc2652/SonoffZBPro_coord_20240710.hex
I updated all the BerryScript files mentioned in the https://notenoughtech.com/home-automation/tasmota-on-sonoff-zb-bridge-pro/#flash but instead of uploading SonoffZBPro_coord_20220219.hex I choose https://github.com/arendst/Tasmota/blob/development/tools/fw_SonoffZigbeeBridgePro_cc2652/SonoffZBPro_coord_20240710.hex

The flashing indicated no issues and it seemingly went fine. After restarting the device the bootlog tells me:

00:00:00.067 UFS: FlashFS mounted with 796 kB free
00:00:00.081 CFG: Loaded from File, Count 2737
00:00:00.091 QPC: Count 1
00:00:00.094 I2C: Bus1 using GPIO26(SCL) and GPIO25(SDA)
00:00:00.138 BRY: Berry initialized, RAM used 3508 bytes
00:00:00.172 Project tasmota - Z2T Version 14.4.0(release-zbbrdgpro)-3_1_0(2024-12-11T09:21:45)
00:00:00.173 ZIG: Loading Zigbee data
00:00:00.179 ZIG: No Zigbee device information
00:00:00.182 ZIG: No Zigbee device data
00:00:00.183 ZIG: ZbLoad '<internal_plugin>' loaded successfully
00:00:01.000 WIF: Connecting to AP1 Blablabla Channel 1 BSSId 12:34:56:FA:FA:FA in mode HE20 as Z2T...
00:00:02.756 WIF: Connected
23:14:23.011 HTP: Web server active on Z2T with IP address 192.168.1.123
23:14:24.023 MQT: Attempting connection...
23:14:24.887 MQT: TLS connected in 858 ms, stack low mark 2256
23:14:24.888 MQT: Connected
23:14:24.892 MQT: Z2T/tele/LWT = Online (retained)
23:14:24.895 MQT: Z2T/cmnd/POWER = 
23:14:24.905 MQT: Z2T/tele/INFO1 = {"Info1":{"Module":"Sonoff Zigbee Pro","Version":"14.4.0(release-zbbrdgpro)","FallbackTopic":"cmnd/tasmota_68B4A0_fb/","GroupTopic":"tasmotas/cmnd/"}}
23:14:24.921 MQT: Z2T/tele/INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"Z2T","IPAddress":"192.168.1.123","IP6Global":"","IP6Local":"fe80::bad6:1aff:fe68:b4a0%st1"}}
23:14:24.936 MQT: Z2T/tele/INFO3 = {"Info3":{"RestartReason":"Software reset CPU","BootCount":597}}
23:14:27.889 QPC: Reset
23:14:28.891 MQT: Z2T/tele/STATE = {"Time":"2024-12-11T23:14:28","Uptime":"0T00:00:08","UptimeSec":8,"Heap":156,"SleepMode":"Normal","Sleep":0,"LoadAvg":331,"MqttCount":1,"Berry":{"HeapUsed":3,"Objects":45},"Wifi":{"AP":1,"SSId":"Blablabla","BSSId":"12:34:56:FA:FA:FA","Channel":1,"Mode":"HE20","RSSI":58,"Signal":-71,"LinkCount":1,"Downtime":"0T00:00:02"}}
23:14:35.582 ZIG: rebooting ZNP device
23:14:38.442 MQT: Z2T/tele/RESULT = {"ZbState":{"Status":1,"Message":"CCxxxx ZNP booted","RestartReason":"Power-up","MajorRel":2,"MinorRel":7}}
23:14:38.565 MQT: Z2T/tele/RESULT = {"ZbState":{"Status":50,"MajorRel":2,"MinorRel":7,"MaintRel":1,"Revision":20240710}}
23:14:38.608 MQT: Z2T/tele/RESULT = {"ZbState":{"Status":2,"Message":"Resetting configuration"}}
23:14:40.816 MQT: Z2T/tele/RESULT = {"ZbState":{"Status":3,"Message":"Configured, starting coordinator"}}
23:15:04.176 ZIG: timeout, goto label 99
23:15:04.182 MQT: Z2T/tele/RESULT = {"ZbState":{"Status":99,"Message":"Abort"}}
23:15:04.184 ZIG: Abort
23:15:04.185 ZIG: Stopping (99)

And obviously Zigbee does not work. I deleted all files that relate to paired devices but that did not change it. I tried the templates in the Submenu Autoconf, the one with TCP (TCP ZBBridge Pro) and the one without TCP in the name. The one with TCP in the name does not try to initialize the Zigbee-Module and just opens a socket. I assume this is for a remote Zigbee2MQTT or ZHA instance, which is not what I was using before and I do not intend to use. I wanted to keep using Z2T, just with the most recent firmware.

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

• Read the Contributing Guide and Policy and the Code of Conduct
• Searched the problem in issues
• Searched the problem in discussions
• Searched the problem in the docs
• [x]Searched the problem in the chat
• Device used (e.g., Sonoff Basic): Sonoff Zigbee Pro
• Tasmota binary firmware version number used: 14.4.0
  • Pre-compiled
  • Self-compiled
• Flashing tools used: Upload
• Provide the output of command: Backlog Template; Module; GPIO 255:

23:40:23.176 CMD: Backlog Template; Module; GPIO 255
23:40:23.210 MQT: Z2T/stat/RESULT = {"NAME":"Sonoff Zigbee Pro","GPIO":[0,0,576,0,480,0,0,0,0,1,1,5792,0,0,0,3552,0,320,5793,3584,0,640,608,32,0,0,0,0,0,1,0,0,0,0,0,0],"FLAG":0,"BASE":1}
23:40:23.407 MQT: Z2T/stat/RESULT = {"Module":{"0":"Sonoff Zigbee Pro"}}
23:40:23.621 MQT: Z2T/stat/RESULT = {"GPIO0":{"0":"None"},"GPIO1":{"0":"None"},"GPIO2":{"576":"LedLink_i"},"GPIO3":{"0":"None"},"GPIO4":{"480":"Buzzer"},"GPIO5":{"0":"None"},"GPIO6":{"0":"None"},"GPIO7":{"0":"None"},"GPIO8":{"0":"None"},"GPIO9":{"0":"None"},"GPIO10":{"0":"None"},"GPIO11":{"0":"None"},"GPIO12":{"0":"None"},"GPIO13":{"0":"None"},"GPIO14":{"0":"None"},"GPIO15":{"5792":"Zigbee Rst1"},"GPIO16":{"0":"None"},"GPIO17":{"0":"None"},"GPIO18":{"0":"None"},"GPIO19":{"3552":"Zigbee Tx"},"GPIO20":{"0":"None"},"GPIO21":{"320":"Led_i1"},"GPIO22":{"5793":"Zigbee Rst2"},"GPIO23":{"3584":"Zigbee Rx"},"GPIO24":{"0":"None"},"GPIO25":{"640":"I2C SDA1"},"GPIO26":{"608":"I2C SCL1"},"GPIO27":{"32":"Button1"},"GPIO32":{"0":"None"},"GPIO33":{"0":"None"},"GPIO34":{"0":"None"},"GPIO35":{"0":"None"},"GPIO36":{"0":"None"},"GPIO37":{"0":"None"},"GPIO38":{"0":"None"},"GPIO39":{"0":"None"}}

• If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

23:42:47.006 CMD: Backlog Rule1; Rule2; Rule3
23:42:47.035 MQT: Z2T/stat/RESULT = {"Rule1":{"State":"off","Once":"off","StopOnError":"off","Length":0,"Free":511,"Rules":""}}
23:42:47.233 MQT: Z2T/stat/RESULT = {"Rule2":{"State":"off","Once":"off","StopOnError":"off","Length":0,"Free":511,"Rules":""}}
23:42:47.435 MQT: Z2T/stat/RESULT = {"Rule3":{"State":"off","Once":"off","StopOnError":"off","Length":0,"Free":511,"Rules":""}}

• Provide the output of this command: Status 0:

23:43:24.404 CMD: Status 0
23:43:24.413 MQT: Z2T/stat/STATUS = {"Status":{"Module":0,"DeviceName":"Z2T","FriendlyName":["Z2T"],"Topic":"Z2T","ButtonTopic":"0","Power":"1","PowerLock":"0","PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0,"StatusRetain":0}}
23:43:24.451 MQT: Z2T/stat/STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"https://ota.tasmota.com/tasmota32/tasmota32-zbbrdgpro.bin","RestartReason":"Software reset CPU","Uptime":"0T00:01:17","StartupUTC":"2024-12-11T22:42:07","Sleep":0,"CfgHolder":4617,"BootCount":600,"BCResetTime":"2023-11-10T21:32:07","SaveCount":2745}}
23:43:24.489 MQT: Z2T/stat/STATUS2 = {"StatusFWR":{"Version":"14.4.0(release-zbbrdgpro)","BuildDateTime":"2024-12-11T09:21:45","Core":"3_1_0","SDK":"5.3.2","CpuFrequency":160,"Hardware":"ESP32-D0WD-V3 v3.0","CR":"481/699"}}
23:43:24.510 MQT: Z2T/stat/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["Papa George Net 1","Papa George Net - Repeater"],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C80001000600003C5A0A192800000000","00000480","00206002","00040000","00000000"]}}
23:43:24.548 MQT: Z2T/stat/STATUS4 = {"StatusMEM":{"ProgramSize":1511,"Free":344,"Heap":152,"StackLowMark":2,"PsrMax":2048,"PsrFree":2037,"ProgramFlashSize":4096,"FlashSize":4096,"FlashChipId":"16405E","FlashFrequency":40,"FlashMode":"DIO","Features":["0809","0F8087CE","00548001","000000C3","00000000","C0000881","40020080","00200000","54000808","00000080","00000004"],"Drivers":"1,2,!4,!8,9,10,12,!16,!20,!21,!23,24,29,!35,38,!41,50,52,!59,62,!68,82,!121","Sensors":"1,2,5,6,127","I2CDriver":""}}
23:43:24.601 MQT: Z2T/stat/STATUS5 = {"StatusNET":{"Hostname":"Z2T","IPAddress":"192.168.1.123","Gateway":"192.168.1.1","Subnetmask":"255.255.255.0","DNSServer1":"192.168.1.1","DNSServer2":"0.0.0.0","Mac":"B8:D6:1A:68:B4:A0","IP6Global":"","IP6Local":"fe80::bad6:1aff:fe68:b4a0%st1","Ethernet":{"Hostname":"","IPAddress":"0.0.0.0","Gateway":"0.0.0.0","Subnetmask":"0.0.0.0","DNSServer1":"192.168.1.1","DNSServer2":"0.0.0.0","Mac":"00:00:00:00:00:00","IP6Global":"","IP6Local":""},"Webserver":2,"HTTP_API":0,"WifiConfig":4,"WifiPower":16.0}}
23:43:24.651 MQT: Z2T/stat/STATUS6 = {"StatusMQT":{"MqttHost":"geheim","MqttPort":8883,"MqttClientMask":"tasmota_%06X","MqttClient":"tasmota_68B4A0","MqttUser":"geheim","MqttCount":1,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}
23:43:24.682 MQT: Z2T/stat/STATUS7 = {"StatusTIM":{"UTC":"2024-12-11T22:43:24Z","Local":"2024-12-11T23:43:24","StartDST":"2024-03-31T02:00:00","EndDST":"2024-10-27T03:00:00","Timezone":"+01:00","Sunrise":"08:34","Sunset":"16:52"}}
23:43:24.703 MQT: Z2T/stat/STATUS10 = {"StatusSNS":{"Time":"2024-12-11T23:43:24"}}
23:43:24.718 MQT: Z2T/stat/STATUS11 = {"StatusSTS":{"Time":"2024-12-11T23:43:24","Uptime":"0T00:01:17","UptimeSec":77,"Heap":152,"SleepMode":"Normal","Sleep":0,"LoadAvg":600,"MqttCount":1,"Berry":{"HeapUsed":3,"Objects":45},"Wifi":{"AP":1,"SSId":"geheim","BSSId":"geheim","Channel":1,"Mode":"HE20","RSSI":60,"Signal":-70,"LinkCount":1,"Downtime":"0T00:00:03"}}}

• Set weblog to 4 and then, when you experience your issue, provide the output of the Console log:

  Console output here:

TO REPRODUCE

I assume upgrade from Zigbee-Firmware 2022 to 2024, I am surprised other do not seem to have this issue.

EXPECTED BEHAVIOUR

Just the most recent Zigee-Firmware, perhaps re-pairing the devices and that should be it.

[Torxgewinde]

Flashing back to https://github.com/arendst/Tasmota/blob/development/tools/fw_SonoffZigbeeBridgePro_cc2652/SonoffZBPro_coord_20220219.hex does resolve the issue:

07:19:32.776 FLH: Starting verification of HEX file
07:19:43.869 FLH: Verification of HEX file OK
07:20:06.933 CMD: cc.flash()
07:20:14.623 FLH: cc2652_flasher rx=23 tx=19 rst=15 bsl=22
07:20:14.638 FLH: Flashing started (takes 5-8 minutes during which Tasmota is unresponsive)
07:24:08.109 FLH: Flashing completed: OK
07:24:08.217 FLH: Flash crc32 0x000000 - 0x2FFFF = bytes('1598929A')
07:24:08.244 MQT: Attempting connection...
07:24:09.208 MQT: TLS connected in 955 ms, stack low mark 2256
07:24:09.209 MQT: Connected
07:24:09.214 MQT: Z2T/tele/LWT = Online (retained)
07:24:09.217 MQT: Z2T/cmnd/POWER = 

...restart...

07:26:06.615 ZIG: rebooting ZNP device
07:26:07.500 MQT: Z2T/tele/RESULT = {"ZbState":{"Status":1,"Message":"CCxxxx ZNP booted","RestartReason":"Power-up","MajorRel":2,"MinorRel":7}}
07:26:07.623 MQT: Z2T/tele/RESULT = {"ZbState":{"Status":50,"MajorRel":2,"MinorRel":7,"MaintRel":1,"Revision":20220219}}
07:26:07.637 MQT: Z2T/tele/RESULT = {"ZbState":{"Status":2,"Message":"Resetting configuration"}}
07:26:09.340 MQT: Z2T/tele/RESULT = {"ZbState":{"Status":3,"Message":"Configured, starting coordinator"}}
07:26:15.168 MQT: Z2T/tele/RESULT = {"ZbState":{"Status":40,"NewState":9,"Message":"Started as coordinator"}}
07:26:15.190 MQT: Z2T/tele/RESULT = {"ZbState":{"Status":51,"IEEEAddr":"0x00124B002B482BA8","ShortAddr":"0x0000","DeviceType":7,"DeviceState":9,"NumAssocDevices":0}}
07:26:15.248 MQT: Z2T/tele/RESULT = {"ZbState":{"Status":0,"Message":"Started"}}
07:26:15.251 ZIG: Zigbee started
07:26:43.026 MQT: Z2T/tele/RESULT = {"ZbState":{"Status":21,"Message":"Pairing mode enabled"}}
07:26:43.030 MQT: Z2T/stat/RESULT = {"ZbPermitJoin":"Done"}

[Torxgewinde]

I think all i experienced was a corrupted file for SonoffZBPro_coord_20240710.hex. After deleting the previous hex file (pressing the flame), downloading a fresh copy and upgrading it now works as expected 🤷

So, i can confirm, the 2024 coordinator firmware works on Sonoff Zigbee Pro and i did not even have to re-pair the connected devices. Thank you!